Geoscience Australia Web Services

Science Category Service Name Service Description URLs
  GeoCatCSW A catalogue service for Geoscience Australia products CSW:http://www.ga.gov.au/geonetwork/srv/en/csw? request=GetCapabilities&service=CSW
Climate      
  CCSBasins This map service has been created to support the CIAP project. This polygon dataset contains the sedimentary basins of Australia ranked by their CO2 storage potential. WMS 1.3.0:http://www.ga.gov.au/gis/services/climate/CCSBasins/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/climate/CCSBasins/MapServer
  CIAP_Pipelines This map service supports the CIAP project. The pipeline data is extracted from Geoscience Australia National Topographic Series Database. WMS 1.3.0:http://www.ga.gov.au/gis/services/climate/CIAP_Pipelines/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/climate/CIAP_Pipelines/MapServer
  CIAP Tile Index System Nested tile indexes from 1:25000 through to 1:10000000 scales based on the ICSM map indexes. This product supports the best available information system as used by the CIAP application. WMS 1.3.0:http://www.ga.gov.au/gis/services/climate/CIAP_Tile_Index_System/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/climate/CIAP_Tile_Index_System/MapServer
Earth Monitoring      
Earth Observation      
  Ausimage_Canberra_2014 Ausimage Canberra 2014 is an OGC WMS web service of high resolution aerial imagery (10 cm to 18 cm) over Canberra and Queanbeyan, acquired in February and April 2014. WMS 1.3.0:http://www.ga.gov.au/gisimg/services/earth_observation/Ausimage_Canberra_2014/ImageServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/earth_observation/Ausimage_Canberra_2014/ImageServer
  Australian Reflectance Grid 25 (ARG25)   WMS 1.3.0:http://eos.ga.gov.au/thredds/wms/LANDSAT/2008/10/LS7_ETM_NBAR_P54_GANBAR01-002_115_079_20081021_BX.nc?service=WMS&version=1.3.0&request=GetCapabilities
WCS:http://eos.ga.gov.au/thredds/wcs/LANDSAT/2008/10/LS7_ETM_NBAR_P54_GANBAR01-002_115_079_20081021_BX.nc? service=WCS&version=1.0.0&request=GetCapabilities
CSW:http://eos.ga.gov.au/geonetwork/srv/eng/csw? service=CSW&request=GetCapabilities
  DMCII_Sample_Data_1   WMS 1.3.0:http://www.ga.gov.au/gisimg/services/earth_observation/DMCII_Sample_Data_1/ImageServer/WMSServer?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/gisimg/services/earth_observation/DMCII_Sample_Data_1/ImageServer/WCSServer?request=GetCapabilities&service=WCS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/earth_observation/DMCII_Sample_Data_1/ImageServer
  Flood Study A geoserver instance delivering two primary layers
FLOOD_STUDY_SUMMARY - A portrayal service for flood studies. The primary usage intention is to search for studies and return summary info about the study.
FLOOD_STUDY_MAP - a portrayal service for maps relating to studies. the primary usage intention is to search for flood study maps and return summary metadata about those maps.
WMS 1.3.0:http://www.ga.gov.au/flood-study-search-gws/ows?service=wms&version=1.3.0&request=GetCapabilities
WMS 1.1.1http://www.ga.gov.au/flood-study-search-gws/ows?service=wms&version=1.1.1&request=GetCapabilities
  Landcover_WM   WMS 1.3.0:http://www.ga.gov.au/gis/services/earth_observation/Landcover_WM/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/earth_observation/Landcover_WM/MapServer
  Water Observations from Space WOfS is a gridded dataset indicating areas where surface water has been observed using the Geoscience Australia (GA) Earth observation satellite data holdings. The WOfS product Version 1.0 includes observations taken between 1998 and 2012 (inclusive) from the Landsat 5 and 7 satellites. Future versions of the product will extend the temporal range and diversify the data sources. WOfS covers all of mainland Australia and Tasmania but excludes off-shore Territories. WMS 1.3.0:http://eos.ga.gov.au/geoserver/ows?service=wms&version=1.3.0&request=GetCapabilities
Earth Science      
  AUS GA 1:2.5M Geologic Units GeoSciML v2.0 WFS of the geological units of Australia mapped at 1:2.5 million scale. (2008 edition data) WFS 1.1.0:http://www.ga.gov.au/geows/geologicunits/oneg_aus_2_5m/wfs?request=GetCapabilities&service=wfs&version=1.1.0
  Crustal Elements of Australia   WMS 1.3.0:http://www.ga.gov.au/gis/services/earth_science/Crustal_Elements_of_Australia/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/earth_science/Crustal_Elements_of_Australia/MapServer
  EastAUS GA 1:1M Contacts GeoSciML v2.0 WFS of the geological contacts of Australia mapped at 1:1 million scale. (2008 edition data) WFS1.1.0:http://www.ga.gov.au/geows/contacts/oneg_east_aus_1m/wfs?request=GetCapabilities&service=wfs&version=1.1.0
  East AUS GA 1:1M Faults GeoSciML v2.0 WFS of the faults of eastern Australia mapped at 1:1 million scale.(2008 edition data) WFS 1.1.0:http://www.ga.gov.au/geows/faults/oneg_east_aus_1m/wfs?request=GetCapabilities&service=wfs&version=1.1.0
  East AUS GA 1:1M Geologic Units GeoSciML v2.0 WFS of the geological units of eastern Australia mapped at 1:1 million scale.(2008 edition data) WFS 1.1.0:http://www.ga.gov.au/geows/geologicunits/oneg_east_aus_1m/wfs?request=GetCapabilities&service=wfs&version=1.1.0
  East AUS GA 1:1M Shear Zones GeoSciML v2.0 WFS of the shear zones of eastern Australia mapped at 1:1 million scale. (2008 edition data) WFS 1.1.0:http://www.ga.gov.au/geows/sheardisplacementstructures/oneg_east_aus_1m/wfs?request=GetCapabilities&service=wfs&version=1.1.0
  Field Sites (outcrops) WMS and WFS (GeoSciML v2.0 and O&M v1.0) of a selected set of GA's geological field site (outcrops) database. (2008 data) WMS 1.3.0:http://www.ga.gov.au/wms/getmap?dataset=geows_outcrops&service=wms&request=getcapabilities
  GA - GeoSciML Borehole Vocabulary Service GeoSciML Borehole Vocabulary Service hosted at Geoscience Australia. URL:http://www.ga.gov.au/sissvoc/api/borehole-gsmlborehole/conceptscheme
  GA - Onshore and Offshore Australian Boreholes
Complex Web Feature Service
Geoscience Australia defines a borehole as the generalized term for any narrow shaft drilled in the ground, either vertically or horizontally, and would include Mineral Drillholes, Petroleum Wells and Water Bores along with a variety of others types, but
does not include Costean, Trench or Pit. For the purpose of a borehole as defined by GeoSciML Borehole 3.0, the dataset has
been restricted to onshore and offshore Australian boreholes, and bores that have the potential to support geological investigations and assessment of a variety of resources.
WFS 1.1.0:http://www.ga.gov.au/borehole-gsmlborehole-gws/ows? service=wfs&version=1.0.0&request=GetCapabilities
WFS 1.0.0:http://www.ga.gov.au/borehole-gsmlborehole- gws/ows?service=wfs&version=1.1.0&request=GetCapabilities
WFS 2.0.0:http://www.ga.gov.au/borehole-gsmlborehole- gws/ows?service=wfs&version=2.0.0&request=GetCapabilities
  GA - Onshore and Offshore Australian Boreholes
Simple Web Feature Service
Geoscience Australia defines a borehole as the generalized term for any narrow shaft drilled in the ground, either vertically or horizontally, and would include Mineral Drillholes, Petroleum Wells and Water Bores along with a variety of others types, but
does not include Costean, Trench or Pit. For the purpose of a borehole as defined by GeoSciML Borehole 3.0, the dataset has
been restricted to onshore and offshore Australian boreholes, and bores that have the potential to support geological investigations and assessment of a variety of resources.
WFS 1.1.0:http://www.ga.gov.au/borehole-gsmlborehole-gws/ows? service=wfs&version=1.0.0&request=GetCapabilities
WFS 1.0.0:http://www.ga.gov.au/borehole-gsmlborehole- gws/ows?service=wfs&version=1.1.0&request=GetCapabilities
WFS 2.0.0:http://www.ga.gov.au/borehole-gsmlborehole- gws/ows?service=wfs&version=2.0.0&request=GetCapabilities
  GA - Onshore and Offshore Australian Boreholes
Web Mapping Service
Geoscience Australia defines a borehole as the generalized term for any narrow shaft drilled in the ground, either vertically or horizontally, and would include Mineral Drillholes, petroleum Wells and Water Bores along with a variety of others types, but does not include Costean, Trench or Pit. For the purpose of a borehole as defined by GeoSciML Borehole 3.0, the dataset has been restricted to onshore and offshore Australian boreholes, and bores that have the potential to support geological investigations and assessment of a variety of resources. WMS 1.3.0:http://www.ga.gov.au/borehole-gsmlborehole-gws/ows? service=wms&version=1.3.0&request=GetCapabilities
WMS 1.1.1http://www.ga.gov.au/borehole-gsmlborehole-gws/ows? service=wms&version=1.1.1&request=GetCapabilities
  GA - Onshore and Offshore Borehole and Waterwell
Specimen Complex Web Feature Service
Geoscience Australia defines a borehole as the generalized term for any narrow shaft drilled in the ground, either vertically or horizontally, and would include Mineral Drillholes, Petroleum Wells and Water Bores along with a variety of others types, but does not include Costean, Trench or Pit. For the purpose of a borehole as defined by GeoSciML Borehole 3.0, the dataset has been restricted to onshore and offshore Australian boreholes, and bores that have the potential to support geological investigations and assessment of a variety of resources. WFS 1.1.0:http://www.ga.gov.au/groundwater-gwmlwaterwell- gws/ows?service=wfs&version=1.0.0&request=GetCapabilities
WFS 1.0.0:http://www.ga.gov.au/groundwater- gwmlwaterwell-gws/ows?service=wfs&version=1.1.0&request=GetCapabilities
WFS 2.0.0:http://www.ga.gov.au/groundwater- gwmlwaterwell-gws/ows?service=wfs&version=2.0.0&request=GetCapabilities
  GA_Onshore_Seismic_Surverys This map service was created to replace the GA National Geoscience Datasets service: to that end it should be used in conjunction with other GA map services. It contains locations of onshore seismic surveys. WMS 1.3.0:http://www.ga.gov.au/gis/services/earth_science/GA_Onshore_Seismic_Surveys/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/earth_science/GA_Onshore_Seismic_Surveys/MapServer
  GA_Surface_Geology_of_Australia The Surface Geology of Australia Web Map Service (2012 edition) provides two seamless national coverages of bedrock and surficial geology, compiled for use at 1:1 million scale and 1:2.5 million scale. The 1:1M data is limited so that it does not display at scales less than 1:1,500,000. The 1:2.5M data is limited so that it does not display at scales greater than 1:1,500,000. The data represents outcropping or near-outcropping bedrock units, and unconsolidated or poorly consolidated regolith material covering bedrock. Geological units are represented as polygon and line geometries, and are attributed with information regarding stratigraphic name and hierarchy, age, lithology, and primary data source. Layers are available for geological units coloured by lithostratigraphy, age, and lithology. The dataset also contains geological contacts, structural features such as faults and shears, and miscellaneous supporting lines like the boundaries of water and ice bodies. WMS 1.3.0:http://www.ga.gov.au/gis/services/earth_science/GA_Surface_Geology_of_Australia/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/earth_science/GA_Surface_Geology_of_Australia/MapServer
  GA_Surface_Geology_of_Australia_WM Cached Australian Surface Geology (1:1M & 1:2.5M), in Web Mercator projection. (2012 edition data) ESRI REST Page:http://www.ga.gov.au/gis/rest/services/earth_science/GA_Surface_Geology_of_Australia_WM/MapServer
  Geomorphology_Environment_WM The Coastal Geomorphology of Australia Web Map Service contains the two nationally consistent coastal geomorphology classifications created for the Commonwealth to support a national coastal risk assessment. First, the Smartline is a polyline representation of the geomorphic features located within 500m shoreline, represented by the high water mark. The second product is a reclassification of over 50 existing digital polygon-based coastal mapping products into a nationally consistent classification scheme based on map scale, ranging from 1:500 000 to 1:25 000. Geomorphological units are represented as polygon and line geometries, and attributed with information regarding depositional environment, landform classification (type and subtype), and primary data source. WMS 1.3.0:http://www.ga.gov.au/gis/services/earth_science/Geomorphology_Environment_WM/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/earth_science/Geomorphology_Environment_WM/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/earth_science/Geomorphology_Environment_WM/MapServer
  Geomorphology_Landform_Subtype_WM The Coastal Geomorphology of Australia Web Map Service contains the two nationally consistent coastal geomorphology classifications created for the Commonwealth to support a national coastal risk assessment. First, the Smartline is a polyline representation of the geomorphic features located within 500m shoreline, represented by the high water mark. The second product is a reclassification of over 50 existing digital polygon-based coastal mapping products into a nationally consistent classification scheme based on map scale, ranging from 1:500 000 to 1:25 000. Geomorphological units are represented as polygon and line geometries, and attributed with information regarding depositional environment, landform classification (type and subtype), and primary data source. WMS 1.3.0:http://www.ga.gov.au/gis/services/earth_science/Geomorphology_Landform_Subtype_WM/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/earth_science/Geomorphology_Landform_Subtype_WM/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/earth_science/Geomorphology_Landform_Subtype_WM/MapServer
  Geomorphology_Landform_Type_WM The Coastal Geomorphology of Australia Web Map Service contains the two nationally consistent coastal geomorphology classifications created for the Commonwealth to support a national coastal risk assessment. First, the Smartline is a polyline representation of the geomorphic features located within 500m shoreline, represented by the high water mark. The second product is a reclassification of over 50 existing digital polygon-based coastal mapping products into a nationally consistent classification scheme based on map scale, ranging from 1:500 000 to 1:25 000. Geomorphological units are represented as polygon and line geometries, and attributed with information regarding depositional environment, landform classification (type and subtype), and primary data source. WMS 1.3.0:http://www.ga.gov.au/gis/services/earth_science/Geomorphology_Landform_Type_WM/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/earth_science/Geomorphology_Landform_Type_WM/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/earth_science/Geomorphology_Landform_Type_WM/MapServer
  Geomorphology_Scale_Guide_WM The Coastal Geomorphology of Australia Web Map Service contains the two nationally consistent coastal geomorphology classifications created for the Commonwealth to support a national coastal risk assessment. First, the Smartline is a polyline representation of the geomorphic features located within 500m shoreline, represented by the high water mark. The second product is a reclassification of over 50 existing digital polygon-based coastal mapping products into a nationally consistent classification scheme based on map scale, ranging from 1:500 000 to 1:25 000. Geomorphological units are represented as polygon and line geometries, and attributed with information regarding depositional environment, landform classification (type and subtype), and primary data source. WMS 1.3.0:http://www.ga.gov.au/gis/services/earth_science/Geomorphology_Scale_Guide_WM/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/earth_science/Geomorphology_Scale_Guide_WM/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/earth_science/Geomorphology_Scale_Guide_WM/MapServer
  Geomorphology_Smartline The Coastal Geomorphology of Australia Web Map Service contains the two nationally consistent coastal geomorphology classifications created for the Commonwealth to support a national coastal risk assessment. First, the Smartline is a polyline representation of the geomorphic features located within 500m shoreline, represented by the high water mark. The second product is a reclassification of over 50 existing digital polygon-based coastal mapping products into a nationally consistent classification scheme based on map scale, ranging from 1:500 000 to 1:25 000. Geomorphological units are represented as polygon and line geometries, and attributed with information regarding depositional environment, landform classification (type and subtype), and primary data source. WMS 1.3.0:http://www.ga.gov.au/gis/services/earth_science/Geomorphology_Smartline/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/earth_science/Geomorphology_Smartline/MapServer
  Geoscience_Australia_Geochemical_Analyses   WMS 1.3.0:http://www.ga.gov.au/gis/services/earth_science/Geoscience_Australia_Geochemical_Analyses/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/earth_science/Geoscience_Australia_Geochemical_Analyses/ MapServer
  Geoscience_Australia_Geochronlogy This map service was created to replace the GA National Geoscience Datasets service: to that end it should be used in conjunction with other GA map services. There are layers for SHRIMP, Sm-Nd, Rb-Sr and U-Pb. While the data used for SHRIMP and Sm-Nd is from new data releases, the data for Rb-Sr and U-Pb is the same as used in the National Geoscience Datasets service. Some data for Antarctica is included. WMS 1.3.0:http://www.ga.gov.au/gis/services/earth_science/Geoscience_Australia_Geochronology/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/earth_science/Geoscience_Australia_Geochronology/MapServer
  Geoscience_Australia_Geological_Provinces_2013 The Australian Geological Provinces Database contains descriptions and spatial extents of the fundamental geological elements of the Australian continent and offshore surrounds. Province types include sedimentary basins, tectonic provinces such as cratons and orogens, igneous provinces, and metallogenic provinces. Spatial data has been captured largely at approximately 1:1M scale for intended use between 1:2M and 1:5M scale. This edition (2013.01) of the dataset is not a complete representation of all of Australia's geological provinces. Further work is required to complete the national geological province collection. Additionally, not all the provinces supplied herein have undergone a rigorous quality assurance (QA) check to ensure the accuracy and completeness of their descriptions. The geological definition of some provinces is contentious. While every effort has been made to achieve a consensus interpretation of each province, including significant collaboration with state and territory geological surveys, scientific debate may still occur about the nature and extent of some provinces. The full 2D spatial extent (ie, including the extent of a province under any overlying cover material) of provinces has been captured. Where possible, the full extent outlines (contacts) of provinces have been attributed with information about the source, accuracy and observation method of those lines. WMS 1.3.0:http://www.ga.gov.au/gis/services/earth_science/Geoscience_Australia_Geological_Provinces_2013/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/earth_science/Geoscience_Australia_Geological_Provinces_2013/MapServer
  Geoscience_Australia_National_Geophysical_Grids Web Map Service of Geoscience Australia's national geophysical grids for magnetics, gravity and radiometrics. The service also contains outlines and descriptions of the airborne geophysical surveys used to compile the magnetic and radiometric grids. WMS 1.3.0:http://www.ga.gov.au/gisimg/services/earth_science/Geoscience_Australia_National_Geophysical_Grids/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/earth_science/Geoscience_Australia_National_Geophysical_Grids/MapServer
  Geoscience_Australia_Seismic_Surveys   WMS 1.3.0:http://www.ga.gov.au/gis/services/earth_science/Geoscience_Australia_Seismic_Surveys/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/earth_science/Geoscience_Australia_Seismic_Surveys/MapServer
  Northern Territory AUS GA 1:1M Contacts GeoSciML v2.0 WFS of the geological contacts of the Northern Territory mapped at 1:1 million scale. (2008 edition data) WFS 1.1.0:http://www.ga.gov.au/geows/contacts/oneg_nt_1m/wfs?request=GetCapabilities&service=wfs&version=1.1.0
  Northern Territory AUS GA 1:1M Faults GeoSciML v2.0 WFS of the faults of the Northern Territory mapped at 1:1 million scale. (2008 edition data) WFS 1.1.0:http://www.ga.gov.au/geows/faults/oneg_nt_1m/wfs?request=GetCapabilities&service=wfs&version=1.1.0
  Northern Territory AUS GA 1:1M Geologic Units GeoSciML v2.0 WFS of the geological units of the Northern Territory mapped at 1:1 million scale. (2008 edition data) WFS 1.1.0:http://www.ga.gov.au/geows/geologicunits/oneg_nt_1m/wfs?request=GetCapabilities&service=wfs&version=1.1.0
  outcrops/oneg_aus_subset Outcrops in Australia (subset only) WFS 1.1.0:http://www.ga.gov.au/geows/outcrops/oneg_aus_subset/wfs?request=GetCapabilities&service=wfs&version=1.1.0
  Rock Property Measurements - Geoscience Australia Located measurements from the Geoscience Australia Rock Properties database. WMS 1.3.0:http://www.ga.gov.au/geophysics-rockpropertypub-gws/ga_rock_properties_wms/ows?service=WMS&version=1.3.0&request=GetCapabilities
WMS 1.1.0:http://www.ga.gov.au/geophysics-rockpropertypub-gws/ga_rock_properties_wms/ows?service=WMS&version=1.1.1&request=GetCapabilities
WFS 2.0.0:http://www.ga.gov.au/geophysics-rockpropertypub-gws/ga_rock_properties_wfs/ows?service=WFS&version=2.0.0&request=GetCapabilities
WFS 1.1.0:http://www.ga.gov.au/geophysics-rockpropertypub-gws/ga_rock_properties_wfs/ows?service=WFS&version=1.1.0&request=GetCapabilities
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/earth_science/Geoscience_Australia_Rock_Properties/Mapserver
  Scanned_250K_Geological_Map_Index This Web Map Service displays the spatial extents of scanned images of all 1:250 000 scale geological maps of Australia. The service contains information on the edition, publication date, and map publisher, and has links to map images available as 75 DPI, 125 DPI or 250 DPI resolution JPG files. WMS 1.3.0:http://www.ga.gov.au/gis/services/earth_science/Scanned_250K_Geological_Map_Index/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/earth_science/Scanned_250K_Geological_Map_Index/MapServer
  South AUS GA 1:1M Contacts GeoSciML v2.0 WFS of the geological contacts of South Australia mapped at 1:1 million scale. (2008 edition data) WFS 1.1.0:http://www.ga.gov.au/geows/contacts/oneg_sa_1m/wfs?request=GetCapabilities&service=wfs&version=1.1.0
  South AUS GA 1:1M Faults GeoSciML v2.0 WFS of the faults of South Australia mapped at 1:1 million scale. (2008 edition data) WFS 1.1.0:http://www.ga.gov.au/geows/faults/oneg_sa_1m/wfs?request=GetCapabilities&service=wfs&version=1.1.0
  South AUS GA 1:1M Geologic Units GeoSciML v2.0 WFS of the geological units of South Australia mapped at 1:1 million scale. (2008 edition data) WFS 1.1.0:http://www.ga.gov.au/geows/geologicunits/oneg_sa_1m/wfs?request=GetCapabilities&service=wfs&version=1.1.0
  South AUS GA 1:1M Shear Zones GeoSciML v2.0 WFS of the shear zones of Australia mapped at 1:1 million scale. (2008 edition data) WFS 1.1.0:http://www.ga.gov.au/geows/sheardisplacementstructures/oneg_sa_1m/wfs?request=GetCapabilities&service=wfs&version=1.1.0
  Western AUS GA 1:1M Contacts GeoSciML v2.0 WFS of the geological contacts of Western Australia mapped at 1:1 million scale. (2008 edition data) WFS 1.1.0:http://www.ga.gov.au/geows/contacts/oneg_wa_1m/wfs?request=GetCapabilities&service=wfs&version=1.1.0
  Western AUS GA 1:1M Faults GeoSciML v2.0 WFS of the faults of Western Australia mapped at 1:1 million scale. (2008 edition data) WFS 1.1.0:http://www.ga.gov.au/geows/faults/oneg_wa_1m/wfs?request=GetCapabilities&service=wfs&version=1.1.0
  Western AUS GA 1:1M Geologic Units GeoSciML v2.0 WFS of the geological units of Western Australia mapped at 1:1 million scale. (2008 edition data) WFS 1.1.0:http://www.ga.gov.au/geows/geologicunits/oneg_wa_1m/wfs?request=GetCapabilities&service=wfs&version=1.1.0
Energy      
  ASEIS_Features Australian Solar Energy Information System feature layers. This service contains layers that service the ASEIS solar mapping application.
WMS 1.3.0:http://www.ga.gov.au/gis/services/energy/ASEIS_Features/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/energy/ASEIS_Features/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page: http://www.ga.gov.au/gis/rest/services/energy/ASEIS_Features/MapServer
  ASEIS_SlopeExclusion_WM Australian Solar Energy Information System feature layers. This service contains layers that service the ASEIS solar mapping application. WMS 1.3.0:http://www.ga.gov.au/gis/services/energy/ASEIS_SlopeExclusion_WM/MapServer/WMSServer?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/gis/services/energy/ASEIS_SlopeExclusion_WM/MapServer/WCSServer?request=GetCapabilities&service=WCS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/energy/ASEIS_SlopeExclusion_WM/MapServer
  OZTemp_Interpreted_Temperature_at_5km
_Depth_Image
This service is an image service for the OZTemp_Interpreted_Temperature_at_5km_Depth_Image product. An interpretation of the crustal temperature at 5km depth, based on the OzTemp bottom hole temperature database and additional confidential company data. A simple two layer model has been used for the extrapolation of the temperature to 5km depth; where the data quality and availability has allowed a slightly more complex three layer model using heatflow and thermal conductivity data was used for the extrapolation. WMS 1.3.0:http://www.ga.gov.au/gisimg/services/energy/OZTemp_Interpreted_Temperature_at_5km_Depth_Image/ImageServer/WMSServer? request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/energy/OZTemp_Interpreted_Temperature_at_5km_De pth_Image/ImageServer
  OZTemp_Well_Data This service is based on the OZTemp Well Temperature Data displaying only the points used to create the OZTemp_Interpreted_Temperature_at_5km_Depth_Image product. This is an extract from the OZTemp database, an updated and improved version of the AUSTHERMO5 borehole temperature database previously described by Chopra and Holgate (2005). OZTemp currently contains 5513 individual wells and 17247 temperature and/or temperature gradient data records. Due to the range of sources of data it is known to be of varying quality and reliability and should therefore be used with discretion, however it represents the best available data compilation of its type. WMS 1.3.0:http://www.ga.gov.au/gis/services/energy/OZTemp_Well_Data/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/energy/OZTemp_Well_Data/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/energy/OZTemp_Well_Data/MapServer
  Solar_Energy_DNI_Mean Australian Solar Energy Information System feature layers. This service contains layers that service the ASEIS solar mapping application. Hourly direct normal solar exposure is the total amount of direct beam solar energy falling over one hour on a surface whose orientation is maintained perpendicular to the solar beam. Typical values for hourly direct normal exposure range up to around 3 MJ/m2 (megajoules per square metre). The values are usually highest in clear skies and decrease rapidly with increasing cloudiness, and also decrease to a lesser extent with increasing haziness and decreasing solar elevation. WMS 1.3.0:http://www.ga.gov.au/gisimg/services/energy/Solar_Energy_DNI_Mean/MapServer/WMSServer?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/gisimg/services/energy/Solar_Energy_DNI_Mean/MapServer/WCSServer?request=GetCapabilities&service=WCS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/energy/Solar_Energy_DNI_Mean/MapServer
  Solar_Energy_GHI_Mean Australian Solar Energy Information System feature layers. This service contains layers that service the ASEIS solar mapping application. Global solar exposure is the total amount of solar energy falling on a horizontal surface. The daily global solar exposure is the total solar energy for a day. Typical values for daily global exposure range from 1 to 35 MJ/m2 (megajoules per square metre). For mid-latitudes, the values are usually highest in clear sun conditions during the summer and lowest during the winter or very cloudy days. WMS 1.3.0:http://www.ga.gov.au/gisimg/services/energy/Solar_Energy_GHI_Mean/MapServer/WMSServer?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/gisimg/services/energy/Solar_Energy_GHI_Mean/MapServer/WCSServer?request=GetCapabilities&service=WCS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/energy/Solar_Energy_GHI_Mean/MapServer
  Solar_Energy_GHI_Minimum Australian Solar Energy Information System feature layers. This service contains layers that service the ASEIS solar mapping application. Global solar exposure is the total amount of solar energy falling on a horizontal surface. The daily global solar exposure is the total solar energy for a day. The daily global exposure range from 1 to 35 MJ/m2 (megajoules per square). For mid-latitudes, the values are usually highest in clear sun conditions during the summer and lowest during the winter or very cloudy days. WMS 1.3.0:http://www.ga.gov.au/gisimg/services/energy/Solar_Energy_GHI_Minimum/MapServer/WMSServer?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/gisimg/services/energy/Solar_Energy_GHI_Minimum/MapServer/WCSServer?request=GetCapabilities&service=WCS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/energy/Solar_Energy_GHI_Minimum/MapServer
Groundwater      
  GA - GroundWaterML Water Well Vocabulary
Service
GroundWaterML Water Well Vocabulary Service hosted at Geoscience Australia. URL:http://www.ga.gov.au/sissvoc/api/groundwater-gwmlwaterwell/conceptscheme
  GA - Onshore Australian Waterwells Complex
Web Feature Service
Geoscience Australia defines a borehole as the generalized term for any narrow shaft drilled in the ground, either vertically or horizontally, and would include Mineral Drillholes, Petroleum Wells and Water Bores along with a variety of others types, but
does not include Costean, Trench or Pit. For the purposes of a Water Well as defined by Groundwater ML v1.0, the dataset has
been restricted to onshore Australian boreholes only, and bores that have the potential to support assessment of groundwater resources, within a Bioregional Assessment.
WFS 1.1.0:http://www.ga.gov.au/groundwater-gwmlwaterwell- gws/ows?service=wfs&version=1.0.0&request=GetCapabilities
WFS 1.0.0:http://www.ga.gov.au/groundwater- gwmlwaterwell-gws/ows?service=wfs&version=1.1.0&request=GetCapabilities
WFS 2.0.0:http://www.ga.gov.au/groundwater- gwmlwaterwell-gws/ows?service=wfs&version=2.0.0&request=GetCapabilities
  GA - Onshore Australian Waterwells Simple
Web Feature Service
Geoscience Australia defines a borehole as the generalized term for any narrow shaft drilled in the ground, either vertically or horizontally, and would include Mineral Drillholes, Petroleum Wells and Water Bores along with a variety of others types, but does not include Costean, Trench or Pit. For the purposes of a Water Well as defined by Groundwater ML v1.0, the dataset has been restricted to onshore Australian boreholes only, and bores that have the potential to support assessment of groundwater resources, within a Bioregional Assessment. WFS 1.1.0:http://www.ga.gov.au/groundwater-gwmlwaterwell- gws/ows?service=wfs&version=1.0.0&request=GetCapabilities
WFS 1.0.0:http://www.ga.gov.au/groundwater- gwmlwaterwell-gws/ows?service=wfs&version=1.1.0&request=GetCapabilities
WFS 2.0.0:http://www.ga.gov.au/groundwater- gwmlwaterwell-gws/ows?service=wfs&version=2.0.0&request=GetCapabilities
  GA - Onshore Australian Waterwells Web
Mapping Service
Geoscience Australia defines a borehole as the generalized term for any narrow shaft drilled in the ground, either vertically or horizontally, and would include Mineral Drillholes, Petroleum Wells and Water Bores along with a variety of others types, but does not include Costean, Trench or Pit. For the purposes of a Water Well as defined by Groundwater ML v1.0, the dataset has been restricted to onshore Australian boreholes only, and bores that have the potential to support assessment of groundwater resources, within a Bioregional Assessment. WMS 1.3.0:http://www.ga.gov.au/groundwater-gwmlwaterwell- gws/ows?service=wms&version=1.3.0&request=GetCapabilities
WMS 1.1.1http://www.ga.gov.au/groundwater-gwmlwaterwell- gws/ows?service=wms&version=1.1.1&request=GetCapabilities
  Hydrogeology_of_Australia This map service was created to replace the GA National Geoscience Datasets service: to that end it should be used in conjunction with other GA map services. The data was produced from the 1:5 000 000 scale Hydrogeology of Australia map (Jacobsen and Lau, 1987). In the service hydrology is described in terms of principal aquifers, defined as those producing the best quality water at highest yield from shallowest depth. Aquifers are defined as porous or fissured, and subdivided in terms of their extent and productivity; these aspects are shown in solid colour on the map. WMS 1.3.0:http://www.ga.gov.au/gis/services/groundwater/Hydrogeology_of_Australia/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/groundwater/Hydrogeology_of_Australia/MapServer
Hazards      
  EarthquakeHazard Earthquake hazard map service created by Geoscience Australia. The service contains the 2012 Earthquake Hazard map as raster and contours. WMS 1.3.0:http://www.ga.gov.au/gis/services/hazards/EarthquakeHazard/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/hazards/EarthquakeHazard/MapServer
  LocalGovernmentAreas   WMS 1.3.0:http://www.ga.gov.au/gis/services/hazards/LocalGovernmentAreas/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/hazards/LocalGovernmentAreas/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/hazards/LocalGovernmentAreas/MapServer
  Landslip_Summary Landslip records from the Landslides Database, optimised for searching and summary display WMS 1.3.0:http://www.ga.gov.au/landslides-gws/landslides/wms?service=WMS&version=1.3.0&request=GetCapabilities
WFS 1.1.1:http://www.ga.gov.au/landslides-gws/landslides/wms?service=WMS&version=1.1.1&request=GetCapabilities
  NEXIS_National_Exposure_Information_System_Building_Exposure NEXIS Building Exposure provides a national profile; aggregated to 2013 Local Government Area (LGA) and ABS Statistical Area Level 1 (SA1) 2011 geographies. Including population, demographics, number of residential dwellings, number of residential, commercial and industrial buildings, structural information and building replacement costs nationally. WFS 1.1.0:http://www.ga.gov.au/gis/services/hazards/NEXIS_National_Exposure_Information_System_Building_Exposure/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/hazards/NEXIS_National_Exposure_Information_System_Building_Exposure/MapServer/
  NEXIS_National_Exposure_Information_System_Population_Density_Exposure NEXIS Population density is a representation of the number of people per NEXIS residential building within a neighbourhood radius. Population density is calculated by the number of people within 10sqkm, 5sqkm, 1sqkm, 500sqm and 100sqm. WMS 1.3.0:http://www.ga.gov.au/gis/services/hazards/NEXIS_National_Exposure_Information_System_Population_Density_Exposure/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/hazards/NEXIS_National_Exposure_Information_System_Population_Density_Exposure/MapServer/
  NEXIS_National_Exposure_Information_System_Value_of_Agricultural_commodities_Produced_VACP_Exposure NEXIS-VACP Exposure integrates the Australian Bureau of Statistics' (ABS) Total Value of Agricultural Commodities Produced (VACP) by SA1 gross value estimates: Year Ending 30 June 2011, applied to cadastral parcels in areas identified as suitable for agricultural production. The purpose of the data is to provide agricultural exposure information at a finer resolution, the cadastral parcel level, as an aid to decision making. WFS 1.1.0:http://www.ga.gov.au/gis/services/hazards/NEXIS_National_Exposure_Information_System_Value_of_Agricultural_commodities_Produced_VACP_Exposure/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/hazards/NEXIS_National_Exposure_Information_System_Value_of_Agricultural_commodities_Produced_VACP_Exposure/MapServer
  NFRIPCatchments   WMS 1.3.0:http://www.ga.gov.au/gis/services/hazards/NFRIPCatchments/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/hazards/NFRIPCatchments/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/hazards/NFRIPCatchments/MapServer
  Sentinel   WMS 1.3.0:http://sentinel.ga.gov.au/geoserver/wms?service=wms&version=1.3.0&request=getcapabilities
WMS 1.1.1:http://sentinel.ga.gov.au/geoserver/wms?service=wms&version=1.1.1&request=getcapabilities
WFS 2.0.0:http://sentinel.ga.gov.au/geoserver/wfs?service=wfs&version=2.0.0&request=getcapabilities
Legislation      
  CWTH_CW_Act_1980_Coastal_Waters_AMB2014 Lines and Polygons depicting the limit and extent of Section 3 of the Coastal Waters (State Powers) Act 1980 and Coastal Waters (Northern Territories Powers) Act 1980. NOTE: the Polygon depicting the area of the coastal waters is not constrained on the landward side. The polygon includes areas that fall within the constitutional limits of the States. When information depicting the landward constitutional limit of the States becomes available, the polygon will be constrained. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82323/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/CWTH_CW_Act_1980_Coastal_Waters_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/CWTH_CW_Act_1980_Coastal_Waters_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI Rest Page:http://www.ga.gov.au/gis/rest/services/legislation/CWTH_CW_Act_1980_Coastal_Waters_AMB2014/MapServer
  CWTH_OPGGSA_2006_Offshore_Areas_of_the_States_AMB2014 This dataset is a digital realisation of the Offshore Areas of the States and Territories as defined under Section 8 of the Offshore Petroleum and Greenhouse Gas Storage Act 2006. The dataset is comprised of points, lines and polylines, and is densified to ensure the geometry will remain correct regardless of projection. WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/CWTH_OPGGSA_2006_Offshore_Areas_of_the_States_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS: 1.1.0:http://www.ga.gov.au/gis/services/legislation/CWTH_OPGGSA_2006_Offshore_Areas_of_the_States_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/CWTH_OPGGSA_2006_Offshore_Areas_of_the_States_AMB2014/MapServer
  CWTH_OPGGSA_2006_Scheduled_Areas_AMB2014 This dataset is a digital realisation of the Scheduled Areas of the States and Territories as defined under Section 8 and Schedule 1 of the Offshore Petroleum and Greenhouse Gas Storage Act 2006. The dataset is comprised of points, lines and polylines, and is densified to ensure the geometry will remain correct regardless of projection. WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/CWTH_OPGGSA_2006_Scheduled_Areas_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/CWTH_OPGGSA_2006_Scheduled_Areas_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/CWTH_OPGGSA_2006_Scheduled_Areas_AMB2014/MapServer
  CWTH_OPGGSA_2006_Petroleum_Blocks_AMB2014_WM This dataset is a digital realisation of the Blocks as defined under Section 33 (3) of the Offshore Petroleum and Greenhouse Gas Storage Act 2006. The blocks are created using a 5 minute by 5 minute graticular section that has been trimmed to the extent of the Offshore Area (defined in the same Act). The dataset is comprised of both points and polygons, and is densified to ensure the geometry will remain correct regardless of projection. The dataset¿s coverage includes areas of coastal waters and land within the constitutional limits of the States and territories, however in these areas the data is indicative only. For titles within the limits of the coastal waters, the relevant State agency should be consulted. WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/CWTH_OPGGSA_2006_Petroleum_Blocks_AMB2014_WM/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/CWTH_OPGGSA_2006_Petroleum_Blocks_AMB2014_WM/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI Rest Page:http://www.ga.gov.au/gis/rest/services/legislation/CWTH_OPGGSA_2006_Petroleum_Blocks_AMB2014_WM/MapServer
  CWTH_SSLA_1973_Contiguous_Zone_AMB2014 Lines and polygons depicting the limit and extent of the Contiguous Zone. Seas and Submerged Lands (Limits of Contiguous Zone) Proclamation 1999. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82315/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/CWTH_SSLA_1973_Contiguous_Zone_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS: 1.1.0:http://www.ga.gov.au/gis/services/legislation/CWTH_SSLA_1973_Contiguous_Zone_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/CWTH_SSLA_1973_Contiguous_Zone_AMB2014/MapServer
  CWTH_SSLA_1973_Continental_Shelf_AMB2014 Line depicting the limit of the continental shelf made under the Seas and Submerged Lands (Limits of Continental Shelf) Proclamation 2012. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82315/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/CWTH_SSLA_1973_Continental_Shelf_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/CWTH_SSLA_1973_Continental_Shelf_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/CWTH_SSLA_1973_Continental_Shelf_AMB2014/MapServer
  CWTH_SSLA_1973_Exclusive_Economic_Zone_Amended_by_Perth_Treaty_AMB2014 Line and polygon depicting the Australian EEZ as modified by the application of the Treaty between the Government of Australia and the Government of the Republic of Indonesia establishing an Exclusive Economic Zone Boundary and Certain Seabed Boundaries (Perth, 14 march 1997) [1997] ATNIF 9 - (not yet in force). NOTE: This is the standard depiction of the Australian EEZ. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82315/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/CWTH_SSLA_1973_Exclusive_Economic_Zone_Amended_by_Perth_Treaty_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/CWTH_SSLA_1973_Exclusive_Economic_Zone_Amended_by_Perth_Treaty_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/CWTH_SSLA_1973_Exclusive_Economic_Zone_Amended_by_Perth_Treaty_AMB2014/MapServer
  CWTH_SSLA_1973_Exclusive_Economic_Zone_As_Proclaimed_AMB2014 Lines and polygons depicting the outer limit and extent of the Australian EEZ as proclaimed by the Seas and Submerged Lands Act 1973 - Proclamation under section 10B (26/07/1994). NOTE: Although this proclamation remains in force, for many matters the limit modified by the action of the Treaty between the Government of Australia and the Government of the Republic of Indonesia establishing an Exclusive Economic Zone Boundary and Certain Seabed Boundaries (Perth, 14 march 1997) [1997] ATNIF 9 - (not yet in force) applies. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82315/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/CWTH_SSLA_1973_Exclusive_Economic_Zone_As_Proclaimed_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/CWTH_SSLA_1973_Exclusive_Economic_Zone_As_Proclaimed_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/CWTH_SSLA_1973_Exclusive_Economic_Zone_As_Proclaimed_AMB2014/MapServer
  CWTH_SSLA_1973_Normal_Baselines_AMB2014 Normal Baseline defined under the Seas and Submerged Lands (Territorial Sea Baseline) Proclamation 2006. This service should be used in conjunction with CWTH_SSLA_1973_Straight_Baselines_AMB2014. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82315/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/CWTH_SSLA_1973_Normal_Baselines_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/CWTH_SSLA_1973_Normal_Baselines_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI Rest Page:http://www.ga.gov.au/gis/rest/services/legislation/CWTH_SSLA_1973_Normal_Baselines_AMB2014/MapServer
  CWTH_SSLA_1973_Straight_Baselines_AMB2014 Straight Baselines defined under the Seas and Submerged Lands (Territorial Sea Baseline) Proclamation 2006. This service should be used in conjunction with CWTH_SSLA_1973_Normal_Baselines_AMB2014. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82315/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/CWTH_SSLA_1973_Straight_Baselines_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/CWTH_SSLA_1973_Straight_Baselines_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/CWTH_SSLA_1973_Straight_Baselines_AMB2014/MapServer
  CWTH_SSLA_1973_Territorial_Sea_AMB2014 Lines and polygons depicting the outer limit and extent of the territorial sea - Seas and Submerged Lands Act 1973 - Proclamation under section 7 (09/11/1990). Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82315/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/CWTH_SSLA_1973_Territorial_Sea_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/CWTH_SSLA_1973_Territorial_Sea_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/CWTH_SSLA_1973_Territorial_Sea_AMB2014/MapServer
  Treaty_Australia_Complete ggregation service displaying all of Australia's maritime delimitation agreements. Australia has entered into maritime boundaries treaties with Indonesia, Papua New Guinea, Solomon Islands, France (New Caledonia and Kerguelen), and New Zealand. Services created from the original treaty documents and densified using the line geometry defined in the treaty (geodesic or loxodromic) with a vertex placed at least every 0.5 nautical miles. This will ensure the geometry of the lines is preserved regardless of projection utilised by a Geographic Information System. Where the original datum of the treaty is not specified as GDA94, all defined points have been transformation by Geoscience Australia¿s National Geospatial Reference Systems Section to GDA94. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82322/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/Treaty_Australia_Complete/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/Treaty_Australia_Complete/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/Treaty_Australia_Complete/MapServer
  Treaty_East_Timor_CMATS_AMB2014 Treaty between Australia and the Democratic Republic of Timor-Leste on Certain Maritime Arrangements in the Timor Sea (Sydney, 23 February 2006) [2007] ATS 12. Services created from the original treaty documents and densified using the line geometry defined in the treaty (geodesic or loxodromic) with a vertex placed at least every 0.5 nautical miles. This will ensure the geometry of the lines is preserved regardless of projection utilised by a Geographic Information System. Where the original datum of the treaty is not specified as GDA94, all defined points have been transformation by Geoscience Australia¿s National Geospatial Reference Systems Section to GDA94. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82322/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/Treaty_East_Timor_CMATS_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/Treaty_East_Timor_CMATS_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/Treaty_East_Timor_CMATS_AMB2014/MapServer
  Treaty_East_Timor_JPDA_AMB2014 Timor Sea treaty between the Government of East Timor and the Government of Australia (20 May 2002) [2003] ATS 13. Joint Petroleum Development Zone. Services created from the original treaty documents and densified using the line geometry defined in the treaty (geodesic or loxodromic) with a vertex placed at least every 0.5 nautical miles. This will ensure the geometry of the lines is preserved regardless of projection utilised by a Geographic Information System. Where the original datum of the treaty is not specified as GDA94, all defined points have been transformation by Geoscience Australia¿s National Geospatial Reference Systems Section to GDA94. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82322/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/Treaty_East_Timor_JPDA_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/Treaty_East_Timor_JPDA_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/Treaty_East_Timor_JPDA_AMB2014/MapServer
  Treaty_East_Timor_Unitisation_AMB2014 Agreement between the Government of Australia and the Government of the Democratic Republic of Timor-Leste relating to the unitisation of the Sunrise and Troubadour Fields (Dili, 6 March 2003) [2007] ATS 11. Services created from the original treaty documents and densified using the line geometry defined in the treaty (geodesic or loxodromic) with a vertex placed at least every 0.5 nautical miles. This will ensure the geometry of the lines is preserved regardless of projection utilised by a Geographic Information System. Where the original datum of the treaty is not specified as GDA94, all defined points have been transformation by Geoscience Australia¿s National Geospatial Reference Systems Section to GDA94. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82322/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/Treaty_East_Timor_Unitisation_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS: 1.1.0:http://www.ga.gov.au/gis/services/legislation/Treaty_East_Timor_Unitisation_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/Treaty_East_Timor_Unitisation_AMB2014/MapServer
  Treaty_France_Heard_McDonald_Islands_AMB2014 Agreement on the Maritime Delimitation between the Government of Australian and the Government of the French Republic (Melbourne, 4 January 1982) [1983] ATS 3 - Heard and McDonald Islands and Iles Kerguelen Services created from the original treaty documents and densified using the line geometry defined in the treaty (geodesic or loxodromic) with a vertex placed at least every 0.5 nautical miles. This will ensure the geometry of the lines is preserved regardless of projection utilised by a Geographic Information System. Where the original datum of the treaty is not specified as GDA94, all defined points have been transformation by Geoscience Australia¿s National Geospatial Reference Systems Section to GDA94. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82322/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/Treaty_France_Heard_McDonald_Islands_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/Treaty_France_Heard_McDonald_Islands_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/Treaty_France_Heard_McDonald_Islands_AMB2014/MapServer
  Treaty_France_New_Caledonia_AMB2014 Agreement on maritime delimitation between the Government of Australia and the Government of the French Republic (Melbourne, 4 January 19820 [1983] ATS 3 - Australian Mainland and Nouvelle Caledonie. Services created from the original treaty documents and densified using the line geometry defined in the treaty (geodesic or loxodromic) with a vertex placed at least every 0.5 nautical miles. This will ensure the geometry of the lines is preserved regardless of projection utilised by a Geographic Information System. Where the original datum of the treaty is not specified as GDA94, all defined points have been transformation by Geoscience Australia¿s National Geospatial Reference Systems Section to GDA94. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82322/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/Treaty_France_New_Caledonia_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/Treaty_France_New_Caledonia_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/Treaty_France_New_Caledonia_AMB2014/MapServer
  Treaty_Indonesia_1971_Seabed_AMB2014 Agreement between the Government of the Commonwealth of Australia and the Government of the Republic of Indonesia establishing Certain Seabed Boundaries (Canberra, 18 May 1971) [1973] ATS 31. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82322/. WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/Treaty_Indonesia_1971_Seabed_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/Treaty_Indonesia_1971_Seabed_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/Treaty_Indonesia_1971_Seabed_AMB2014/MapServer
  Treaty_Indonesia_1972_Seabed_AMB2014 Agreement between the Government of the Commonwealth of Australia and the Government of the Republic of Indonesia establishing Certain Seabed Boundaries in the Area of the Timor and Arafura Seas, supplementary to the Agreement of 18 May 1971 (Jakarta, 9 October 1972) [1973] ATS 32. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82322/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/Treaty_Indonesia_1972_Seabed_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/Treaty_Indonesia_1972_Seabed_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/Treaty_Indonesia_1972_Seabed_AMB2014/MapServer
  Treaty_Indonesia_1997_Perth_Treaty_EEZ_AMB2014 Treaty between the Government of Australia and the Government of the Republic of Indonesia establishing an Exclusive Economic Zone Boundary and Certain Seabed Boundaries (Perth, 14 march 1997) [1997] ATNIF 9 - Line delimiting the exclusive economic zone boundary between Australia and Indonesia. Services created from the original treaty documents and densified using the line geometry defined in the treaty (geodesic or loxodromic) with a vertex placed at least every 0.5 nautical miles. This will ensure the geometry of the lines is preserved regardless of projection utilised by a Geographic Information System. Where the original datum of the treaty is not specified as GDA94, all defined points have been transformation by Geoscience Australia¿s National Geospatial Reference Systems Section to GDA94. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82322/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/Treaty_Indonesia_1997_Perth_Treaty_EEZ_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/Treaty_Indonesia_1997_Perth_Treaty_EEZ_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/Treaty_Indonesia_1997_Perth_Treaty_EEZ_AMB2014/MapServer
  Treaty_Indonesia_1997_Perth_Treaty_Seabed_AMB2014 Treaty between the Government of Australia and the Government of the Republic of Indonesia establishing an Exclusive Economic Zone Boundary and Certain Seabed Boundaries (Perth, 14 march 1997) [1997] ATNIF 9 - Western Extension of the seabed boundary. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82322/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/Treaty_Indonesia_1997_Perth_Treaty_Seabed_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/Treaty_Indonesia_1997_Perth_Treaty_Seabed_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/Treaty_Indonesia_1997_Perth_Treaty_Seabed_AMB2014/MapServer
  Treaty_Indonesia_MOU_AMB2014 Memorandum of Understanding between the Governments of Australia and the Government of the Republic of Indonesia regarding the Operations of Indonesian Traditional Fisherman in Areas of the Australian Exclusive Fishing Zone and Continental Shelf 1974. Services created from the original treaty documents and densified using the line geometry defined in the treaty (geodesic or loxodromic) with a vertex placed at least every 0.5 nautical miles. This will ensure the geometry of the lines is preserved regardless of projection utilised by a Geographic Information System. Where the original datum of the treaty is not specified as GDA94, all defined points have been transformation by Geoscience Australia¿s National Geospatial Reference Systems Section to GDA94. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82322/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/Treaty_Indonesia_MOU_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/Treaty_Indonesia_MOU_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI Rest Page:http://www.ga.gov.au/gis/rest/services/legislation/Treaty_Indonesia_MOU_AMB2014/MapServer
  Treaty_Indonesia_Perth_Treaty_Area_of_Overlapping_Jurisdiction_AMB2014 Treaty between the Government of Australia and the Government of the Republic of Indonesia establishing an Exclusive Economic Zone Boundary and Certain Seabed Boundaries (Perth, 14 march 1997) [1997] ATNIF 9 - Area of overlapping jurisdiction over which Australia exercises sovereign rights over the seabed and Indonesia sovereign rights over the water column. Services created from the original treaty documents and densified using the line geometry defined in the treaty (geodesic or loxodromic) with a vertex placed at least every 0.5 nautical miles. This will ensure the geometry of the lines is preserved regardless of projection utilised by a Geographic Information System. Where the original datum of the treaty is not specified as GDA94, all defined points have been transformation by Geoscience Australia¿s National Geospatial Reference Systems Section to GDA94. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82322/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/Treaty_Indonesia_Perth_Treaty_Area_of_Overlapping_Jurisdiction_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/Treaty_Indonesia_Perth_Treaty_Area_of_Overlapping_Jurisdiction_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/Treaty_Indonesia_Perth_Treaty_Area_of_Overlapping_Jurisdiction_AMB2014/MapServer
  Treaty_Indonesia_PFSEL_AMB2014 Memorandum of Understanding Indonesia Traditional Fisherman 1974, MOU Indonesia PFSEL 1981 (PFSEL). Services created from the original treaty documents and densified using the line geometry defined in the treaty (geodesic or loxodromic) with a vertex placed at least every 0.5 nautical miles. This will ensure the geometry of the lines is preserved regardless of projection utilised by a Geographic Information System. Where the original datum of the treaty is not specified as GDA94, all defined points have been transformation by Geoscience Australia¿s National Geospatial Reference Systems Section to GDA94 WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/Treaty_Indonesia_PFSEL_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/Treaty_Indonesia_PFSEL_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/Treaty_Indonesia_PFSEL_AMB2014/MapServer
  Treaty_New_Zealand_North Treaty between the Government of Australia and the Government of New Zealand Establishing Certain Exclusive Economic Zone Boundaries and Continental Shelf Boundaries (Adelaide, 25 July 2004) [2006] ATS 4 - Line delimiting Australia and New Zealand EEZs and continental shelf in the region extending from Lord Howe Rise, past Lord Howe and Norfolk Islands to Three Kings Ridge. Services created from the original treaty documents and densified using the line geometry defined in the treaty (geodesic or loxodromic) with a vertex placed at least every 0.5 nautical miles. This will ensure the geometry of the lines is preserved regardless of projection utilised by a Geographic Information System. Where the original datum of the treaty is not specified as GDA94, all defined points have been transformation by Geoscience Australia¿s National Geospatial Reference Systems Section to GDA94. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82322/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/Treaty_New_Zealand_North/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/Treaty_New_Zealand_North/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/Treaty_New_Zealand_North/MapServer
  Treaty_New_Zealand_South Treaty between the Government of Australia and the Government of New Zealand Establishing Certain Exclusive Economic Zone Boundaries and Continental Shelf Boundaries (Adelaide, 25 July 2004) [2006] ATS 4 -Line delimiting the EEZs and continental shelves between Macquarie Island and Campbell and Auckland Islands. Services created from the original treaty documents and densified using the line geometry defined in the treaty (geodesic or loxodromic) with a vertex placed at least every 0.5 nautical miles. This will ensure the geometry of the lines is preserved regardless of projection utilised by a Geographic Information System. Where the original datum of the treaty is not specified as GDA94, all defined points have been transformation by Geoscience Australia¿s National Geospatial Reference Systems Section to GDA94. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82322/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/Treaty_New_Zealand_South/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/Treaty_New_Zealand_South/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/Treaty_New_Zealand_South/MapServer
  Treaty_PNG_Fisheries_Jurisdiction_AMB2014 Fisheries Jurisdiction Line - Treaty between Australia and the Independent State of Papua New Guinea concerning Sovereignty and Maritime Boundaries in the area between the two Countries, including the area known as Torres Strait, and Related Matters (Sydney, 18 December 1978) [1985] ATS 4. Services created from the original treaty documents and densified using the line geometry defined in the treaty (geodesic or loxodromic) with a vertex placed at least every 0.5 nautical miles. This will ensure the geometry of the lines is preserved regardless of projection utilised by a Geographic Information System. Where the original datum of the treaty is not specified as GDA94, all defined points have been transformation by Geoscience Australia¿s National Geospatial Reference Systems Section to GDA94. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82322/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/Treaty_PNG_Fisheries_Jurisdiction_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/Treaty_PNG_Fisheries_Jurisdiction_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/Treaty_PNG_Fisheries_Jurisdiction_AMB2014/MapServer
  Treaty_PNG_Seabed_AMB2014 Seabed jurisdiction Line - Treaty between Australia and the Independent State of Papua New Guinea concerning Sovereignty and Maritime Boundaries in the area between the two Countries, including the area known as Torres Strait, and Related Matters (Sydney, 18 December 1978) [1985] ATS 4. Services created from the original treaty documents and densified using the line geometry defined in the treaty (geodesic or loxodromic) with a vertex placed at least every 0.5 nautical miles. This will ensure the geometry of the lines is preserved regardless of projection utilised by a Geographic Information System. Where the original datum of the treaty is not specified as GDA94, all defined points have been transformation by Geoscience Australia¿s National Geospatial Reference Systems Section to GDA94. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82322/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/Treaty_PNG_Seabed_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/Treaty_PNG_Seabed_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/Treaty_PNG_Seabed_AMB2014/MapServer
  Treaty_PNG_Territorial_Sea_AMB2014 Outer Limit of the territorial sea of certain Australian islands and cays - Treaty between Australia and the Independent State of Papua New Guinea concerning Sovereignty and Maritime Boundaries in the area between the two Countries, including the area known as Torres Strait, and Related Matters (Sydney, 18 December 1978) [1985] ATS 4. The outer limit of the territorial sea of the islands of Aubusi, Boigu and Moimi, Dauan, Kaumag and Saibai, Deliverance, Turnagain and Anchor Cay, East Cay, Black Rocks, Pearce Cay, Bramble Cay, Turu Cay, Kerr Islet Services created from the original treaty documents and densified using the line geometry defined in the treaty (geodesic or loxodromic) with a vertex placed at least every 0.5 nautical miles. This will ensure the geometry of the lines is preserved regardless of projection utilised by a Geographic Information System. Where the original datum of the treaty is not specified as GDA94, all defined points have been transformation by Geoscience Australia¿s National Geospatial Reference Systems Section to GDA94. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82322/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/Treaty_PNG_Territorial_Sea_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/Treaty_PNG_Territorial_Sea_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/Treaty_PNG_Territorial_Sea_AMB2014/MapServer
  Treaty_PNG_Torres_Strait_Protected_Zone_AMB2014 Protected Zone -Treaty between Australia and the Independent State of Papua New Guinea concerning Sovereignty and Maritime Boundaries in the area between the two Countries, including the area known as Torres Strait, and Related Matters (Sydney, 18 December 1978) [1985] ATS 4. The principal purpose of the Parties in establishing the Protected Zone, and in determining its northern, southern, eastern and western boundaries, is to acknowledge and protect the traditional way of life and livelihood of the traditional inhabitants including their traditional fishing and free movement. A further purpose of the Parties in establishing the Protected Zone is to protect and preserve the marine environment and indigenous fauna and flora in and in the vicinity of the Protected Zone. WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/Treaty_PNG_Torres_Strait_Protected_Zone_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/Treaty_PNG_Torres_Strait_Protected_Zone_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/Treaty_PNG_Torres_Strait_Protected_Zone_AMB2014/MapServer
  Treaty_Solomon_Islands_AMB2014 Agreement between the Government of Australia and the Government of Solomon Islands establishing Certain Sea and Seabed Boundaries (Honiara, 13 September 1988) [1989] ATS 12. Services created from the original treaty documents and densified using the line geometry defined in the treaty (geodesic or loxodromic) with a vertex placed at least every 0.5 nautical miles. This will ensure the geometry of the lines is preserved regardless of projection utilised by a Geographic Information System. Where the original datum of the treaty is not specified as GDA94, all defined points have been transformation by Geoscience Australia¿s National Geospatial Reference Systems Section to GDA94. Data metadata: http://www.ga.gov.au/metadata-gateway/metadata/record/82322/ WMS 1.3.0:http://www.ga.gov.au/gis/services/legislation/Treaty_Solomon_Islands_AMB2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/legislation/Treaty_Solomon_Islands_AMB2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/legislation/Treaty_Solomon_Islands_AMB2014/MapServer
Marine and Coastal      
  Antarctic_Bathymetry_Hillshade_Basemap This is a web service delivered to be used as a basemap for the Legacy of Geoscience Australia (and predecessors) in Geographical Feature names in the Antarctic application. It provides context layers using bathymetry and hillshade data. WMS 1.3.0:http://www.ga.gov.au/gisimg/services/marine_coastal/Antarctic_Bathymetry_Hillshade_Basemap/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/marine_coastal/Antarctic_Bathymetry_Hillshade_Basemap/MapServer
  AMSIS_DistanceTo_Service (GPServer) The AMSIS Distance To tool calculates the distance to a selected marine feature. The output is the distance to the nearest feature from the given location. ESRI REST Page:http://www.ga.gov.au/gisgp/rest/services/marine_coastal/AMSIS_DistanceTo_Service/GPServer
  Australian_Bathymetry_Topography This web service describes the bathymetry dataset of the Australian Exclusive Economic Zone and beyond. Bathymetry data were compiled by Geoscience Australia from multibeam and single beam data (derived from multiple sources), Australian Hydrographic Service (AHS) Laser Airborne Depth Sounding (LADS) data, Royal Australian Navy (RAN) fairsheets, the General Bathymetric Chart of the Oceans (GEBCO) bathymetric model, the 2 arc minute ETOPO (Smith and Sandwell, 1997) and 1 arc minute ETOPO satellite derived bathymetry (Amante and Eakins, 2008). Topographic data (onshore data) is based on the revised Australian 0.0025dd topography grid (Geoscience Australia, 2008), the 0.0025dd New Zealand topography grid (Geographx, 2008) and the 90m SRTM DEM (Jarvis et al, 2008). WMS 1.3.0:http://www.ga.gov.au/gis/services/marine_coastal/Australian_Bathymetry_Topography/MapServer/WMSServer?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/gis/services/marine_coastal/Australian_Bathymetry_Topography/MapServer/WCSServer?request=GetCapabilities&service=WCS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/marine_coastal/Australian_Bathymetry_Topography/MapServer
  Australian_Seabed_Features This web service describes the distribution of seabed geomorphic features on the Australian continental margin, identified and mapped using the Australian Bathymetry and Topography dataset (Webster & Petkovic 2005). Twenty one feature types are shown for the seafloor within the Australian Marine Jurisdiction, including territories around Christmas Island, Cocos (Keeling) Island, Macquarie Island and Norfolk Island (Heam & Harris 2008). WMS 1.3.0:http://www.ga.gov.au/gis/services/marine_coastal/Australian_Seabed_Features/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.0.0:http://www.ga.gov.au/gis/services/marine_coastal/Australian_Seabed_Features/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/marine_coastal/Australian_Seabed_Features/MapServer
  Multibeam_50m_Bathymetry_2012 This map service contains the extents of the multibeam bathymetry data held by GA, as at August 2012, which lies within the boundaries of Australia's Extended Continental Shelf, as well as some data in international waters. WCS:http://www.ga.gov.au/gisimg/services/marine_coastal/Multibeam_50m_Bathymetry_2012/ImageServer/WCSServer?request=GetCapabilities&service=WCS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/marine_coastal/Multibeam_50m_Bathymetry_2012/ImageServer
  Multibeam_50m_Bathymetry_2012_RGB This map service contains the extents of the multibeam bathymetry data held by GA, as at August 2012, which lies within the boundaries of Australia's Extended Continental Shelf, as well as some data in international waters. WMS 1.3.0:http://www.ga.gov.au/gisimg/services/marine_coastal/Multibeam_50m_Bathymetry_2012_RGB/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/marine_coastal/Multibeam_50m_Bathymetry_2012_RGB/MapServer
  Multibeam_Survey_Extents This map service contains the extents of the multibeam bathymetry data held by GA, as at January 2014, which lies within the boundaries of Australia's Extended Continental Shelf, as well as some data in international waters. WMS 1.3.0:http://www.ga.gov.au/gisimg/services/marine_coastal/Multibeam_Survey_Extents/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gisimg/services/marine_coastal/Multibeam_Survey_Extents/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/marine_coastal/Multibeam_Survey_Extents/MapServer
  Multibeam_Survey_Extents_2013 This map service contains the extents and survey details of the multibeam bathymetry data held by GA, as at January 2013. The data mostly lies within the boundaries of Australia's Extended Continental Shelf, with some data in international waters. WMS 1.3.0:http://www.ga.gov.au/gisimg/services/marine_coastal/Multibeam_Survey_Extents_2013/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gisimg/services/marine_coastal/Multibeam_Survey_Extents_2013/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/marine_coastal/Multibeam_Survey_Extents_2013/MapServer
  Multibeam_Survey_Extents_2014 This map service contains the extents of the multibeam bathymetry data held by GA, as at August 2014, which lies within the boundaries of Australia's Extended Continental Shelf, as well as some data in international waters. WMS 1.3.0:http://www.ga.gov.au/gisimg/services/marine_coastal/Multibeam_Survey_Extents_2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gisimg/services/marine_coastal/Multibeam_Survey_Extents_2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/marine_coastal/Multibeam_Survey_Extents_2014/MapServer
  Oceanic_Shoals_CMR_Marine_Biodiversity_Survey_2012 This web service contains sediment and geochemistry information for the Oceanic Shoals Commonwealth Marine Reserve (CMR) in the Timor Sea. WMS 1.3.0:http://www.ga.gov.au/gisimg/services/marine_coastal/Multibeam_Survey_Extents_2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gisimg/services/marine_coastal/Multibeam_Survey_Extents_2014/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/marine_coastal/Multibeam_Survey_Extents_2014/MapServer
  Oceanic_Shoals_Samples This dataset contains sediment and geochemistry data for the Oceanic Shoals Commonwealth Marine Reserve (CMR) in the Timor Sea collected by Geoscience Australia during September and October 2012 on RV Solander (survey GA0339/SOL5650). Further information on the survey is available in the post-survey report published as Geoscience Australia Record 2013/38: Nichol, S.L., Howard, F.J.F., Kool, J., Stowar, M., Bouchet, P., Radke, L., Siwabessy, J., Przeslawski, R., Picard, K., Alvarez de Glasby, B., Colquhoun, J., Letessier, T. & Heyward, A. 2013. Oceanic Shoals Commonwealth Marine Reserve (Timor Sea) Biodiversity Survey: GA0339/SOL5650 Post Survey Report. Record 2013/38. Geoscience Australia: Canberra. (GEOCAT #76658). WMS 1.3.0:http://www.ga.gov.au/gisimg/services/marine_coastal/Oceanic_Shoals_CMR_Marine_Biodiversity_Survey_2012/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gisimg/services/marine_coastal/Oceanic_Shoals_CMR_Marine_Biodiversity_Survey_2012/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/marine_coastal/Oceanic_Shoals_CMR_Marine_Biodiversity_Survey_2012/MapServer
Minerals      
  radmap10 filtered pct potassium   WMS 1.3.0:http://www.ga.gov.au/thredds/wms/national_grids/radmap10_filtered_pctk.nc?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/thredds/wcs/national_grids/radmap10_filtered_pctk.nc?request=GetCapabilities&service=WCS
  radmap10 filtered ppm thorium   WMS 1.3.0: http://www.ga.gov.au/thredds/wms/national_grids/radmap10_filtered_ppmth.nc?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/thredds/wcs/national_grids/radmap10_filtered_ppmth.nc?request=GetCapabilities&service=WCS
  radmap10 filtered ppm uranium   WMS 1.3.0:http://www.ga.gov.au/thredds/wcs/national_grids/radmap10_unfiltered_ppmu.nc?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/thredds/wcs/national_grids/radmap10_filtered_ppmu.nc?request=GetCapabilities&service=WCS
  radmap10 filtered ratio thorium over potassium   WMS 1.3.0:http://www.ga.gov.au/thredds/wms/national_grids/radmap10_filtered_ratio_tk.nc?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/thredds/wcs/national_grids/radmap10_filtered_ratio_tk.nc?request=GetCapabilities&service=WCS
  radmap10 filtered ratio uranium over potassium   WMS 1.3.0:http://www.ga.gov.au/thredds/wms/national_grids/radmap10_filtered_ratio_uk.nc?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/thredds/wcs/national_grids/radmap10_filtered_ratio_uk.nc?request=GetCapabilities&service=WCS
  radmap10 filtered ratio uranium over thorium   WMS 1.3.0:http://www.ga.gov.au/thredds/wms/national_grids/radmap10_filtered_ratio_ut.nc?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/thredds/wcs/national_grids/radmap10_filtered_ratio_ut.nc?request=GetCapabilities&service=WCS
  radmap10 filtered ratio uranium squared over thorium   WMS 1.3.0:http://www.ga.gov.au/thredds/wms/national_grids/radmap10_filtered_ratio_u2t.nc?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/thredds/wcs/national_grids/radmap10_filtered_ratio_u2t.nc?request=GetCapabilities&service=WCS
  radmap10 filtered terrestrial dose rate   WMS 1.3.0:http://www.ga.gov.au/thredds/wms/national_grids/radmap10_filtered_dose.nc?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/thredds/wcs/national_grids/radmap10_filtered_dose.nc?request=GetCapabilities&service=WCS
  radmap10 terrestrial and cosmic total dose rate   WMS 1.3.0:http://www.ga.gov.au/thredds/wms/national_grids/radmap10_filtered_totaldose.nc?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/thredds/wcs/national_grids/radmap10_filtered_totaldose.nc?request=GetCapabilities&service=WCS
  radmap10 unfiltered pct potassium   WMS 1.3.0:http://www.ga.gov.au/thredds/wms/national_grids/radmap10_unfiltered_pctk.nc?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/thredds/wcs/national_grids/radmap10_unfiltered_pctk.nc?request=GetCapabilities&service=WCS
  radmap10 unfiltered ppm thorium   WMS 1.3.0:http://www.ga.gov.au/thredds/wms/national_grids/radmap10_unfiltered_ppmth.nc?request=GetCapabilities&service=WMS
WCS: http://www.ga.gov.au/thredds/wcs/national_grids/radmap10_unfiltered_ppmth.nc?request=GetCapabilities&service=WCS
  radmap10 unfiltered ppm uranium   WMS 1.3.0:http://www.ga.gov.au/thredds/wms/national_grids/radmap10_unfiltered_ppmu.nc?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/thredds/wcs/national_grids/radmap10_unfiltered_ppmu.nc?request=GetCapabilities&service=WCS
  radmap10 unfiltered terrestrial dose   WMS 1.3.0:http://www.ga.gov.au/thredds/wms/national_grids/radmap10_unfiltered_dose.nc?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/thredds/wcs/national_grids/radmap10_unfiltered_dose.nc?request=GetCapabilities&service=WCS
Topography      
  9 second Digital Elevation Model of Australia
Grid Version 3
  WMS 1.3.0:http://www.ga.gov.au/thredds/wms/national_grids/dem-9s.nc
WCS:http://www.ga.gov.au/thredds/wcs/national_grids/dem-9s.nc
  AusHydro The AusHydro database provides a seamless surface hydrography layer for Australia at a nominal scale of 1:250,000. It consists of lines, points and polygons representing natural and man-made features such as water courses, lakes, dams and other water bodies. The natural water course layer consists of a linear network with a consistent topology that provide directional flow paths through the network for hydrological analysis. This network was used to produce the National 9 second Digital Elevation Model (DEM) of Australia (http://www.ga.gov.au/nmd/products/digidat/dem_9s.jsp). It also provides information on naming, hierarchy and perennially. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/AusHydro/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/topography/AusHydro/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/AusHydro/MapServer
  AusHydro_WM The AusHydro database provides a seamless surface hydrography layer for Australia at a nominal scale of 1:250,000. It consists of lines, points and polygons representing natural and man-made features such as water courses, lakes, dams and other water bodies. The natural water course layer consists of a linear network with a consistent topology that provide directional flow paths through the network for hydrological analysis. This network was used to produce the National 9 second Digital Elevation Model (DEM) of Australia (http://www.ga.gov.au/nmd/products/digidat/dem_9s.jsp). It also provides information on naming, hierarchy and perennially. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/AusHydro_WM/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/topography/AusHydro_WM/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/AusHydro_WM/MapServer
  Australian Resource and Energy Infrastructure A cartographic product designed for decision support regarding Australian resources and energy infrastructure. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/Australian_Resource_And_Energy_Infrastructure/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/Australian_Resource_And_Energy_Infrastructure/MapServer
  Australian_Topography The Australian Topographic map service is seamless national dataset coverage for the whole of Australia. The map portrays detailed graphic representation of features that appear on the Earth's surface. These features include cultural, hydrography and relief themes. SS, MS and LS refer to Small, Medium and Large Scale datasets. NAA means the service does Not Anti Alias the features, which means they can be overlayed on other layers without a haloing effect. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/Australian_Topography/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/topography/Australian_Topography/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/Australian_Topography/MapServer
  Australian_Topography_NoAntiAliasing The Australian Topographic map service is seamless national dataset coverage for the whole of Australia. The map portrays detailed graphic representation of features that appear on the Earth's surface. These features include cultural, hydrography and relief themes. SS,MS and LS refer to Small, Medium and Large Scale datasets. NoAntiAliasing means the service does not Anti Alias the features, which means they can be overlayed on other layers without a haloing effect. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/Australian_Topography_NoAntiAliasing/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/topography/Australian_Topography_NoAntiAliasing/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/Australian_Topography_NoAntiAliasing/MapServer
  Australian_Topography_Temporary_Cached_WGS Topographic base map for application testing. Geoscience Australia reserves the right to discontinue this service as required. ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/Australian_Topography_Temporary_Cached_WGS/MapServer
  Australian_Topography_WM The Australian Topographic map service is seamless national dataset coverage for the whole of Australia. The map portrays detailed graphic representation of features that appear on the Earth's surface. These features include cultural, hydrography and relief themes. SS, MS and LS refer to Small, Medium and Large Scale datasets. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/Australian_Topography_WM/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/topography/Australian_Topography_WM/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/Australian_Topography_WM/MapServer
  Australian_Topography_2014 The Australian Topographic map service is seamless national dataset coverage for the whole of Australia. The map portrays detailed graphic representation of features that appear on the Earth's surface. These features include cultural, hydrography and relief themes. Some datasets have a number from 1 and upwards, this number reflects the increasing data from scale to scale. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/Australian_Topography/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/Australian_Topography_2014/MapServer
  Australian_Topography_2014_WM The Australian Topographic map service is seamless national dataset coverage for the whole of Australia. The map portrays detailed graphic representation of features that appear on the Earth's surface. These features include cultural, hydrography and relief themes. Some datasets have a number from 1 and upwards, this number reflects the increasing data from scale to scale. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/Australian_Topography_2014_WM/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/Australian_Topography_2014_WM/MapServer
  Australian_Topography_Lite_2014 The Australian Topographic Lite map service is seamless national dataset coverage for the whole of Australia. The map portrays detailed graphic representation of features that appear on the Earth's surface. These features include cultural, hydrography and relief themes. Some datasets have a number from 1 and upwards, this number reflects the increasing data from scale to scale. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/Australian_Topography_Lite_2014/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/Australian_Topography_Lite_2014/MapServer
  Australian_Topography_Lite_2014_WM The Australian Topographic Lite map service is seamless national dataset coverage for the whole of Australia. The map portrays detailed graphic representation of features that appear on the Earth's surface. These features include cultural, hydrography and relief themes. Some datasets have a number from 1 and upwards, this number reflects the increasing data from scale to scale. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/Australian_Topography_Lite_2014_WM/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/Australian_Topography_Lite_2014_WM/MapServer
  cMurrayDarling2013 This service is for the Murray Darling Basin Elevation Project LiDAR derived 2m Canopy Height Model, and will be continually updated as each new acquisition is delivered. WCS:http://www.ga.gov.au/gisimg/services/topography/cMurrayDarling2013/ImageServer/WCSServer?request=GetCapabilities&service=WCS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/topography/cMurrayDarling2013/ImageServer
  Defence_Restricted_Areas Defence Prohibited and Training Areas. This data approximates the locations of Defence prohibited and training areas. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/Defence_Restricted_Areas/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/Australian_Topography_Lite_2014_WM/MapServer
  DEM_LiDAR_MGAZone54 DEMs derived from LiDAR data from a number of different elevation projects within MGA zone 54 are contained in this web service. This service will continually be updated with additional datasets. WMS 1.3.0:http://www.ga.gov.au/gisimg/services/topography/DEM_LiDAR_MGAZone54/ImageServer/WMSServer?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/gisimg/services/topography/cMurrayDarling2013/ImageServer/WCSServer?request=GetCapabilities&service=WCS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/topography/cMurrayDarling2013/ImageServer
  DEM_LiDAR_MGAZone55 DEMs derived from LiDAR data from a number of different elevation projects within MGA zone 55 are contained in this web service. This service will continually be updated with additional datasets. WMS 1.3.0:http://www.ga.gov.au/gisimg/services/topography/DEM_LiDAR_MGAZone55/ImageServer/WMSServer?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/gisimg/services/topography/DEM_LiDAR_MGAZone55/ImageServer/WCSServer?request=GetCapabilities&service=WCS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/topography/DEM_LiDAR_MGAZone55/ImageServer
  DEM_LiDAR_MGAZone56 DEMs derived from LiDAR data from a number of different elevation projects within MGA zone 56 are contained in this web service. This service will continually be updated with additional datasets. WMS 1.3.0:http://www.ga.gov.au/gisimg/services/topography/DEM_LiDAR_MGAZone56/ImageServer/WMSServer?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/gisimg/services/topography/DEM_LiDAR_MGAZone56/ImageServer/WCSServer?request=GetCapabilitiesamp;&service=WCS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/topography/DEM_LiDAR_MGAZone56/ImageServer
  DSM_LiDAR_MGAZone54 DSMs derived from LiDAR data from a number of different elevation projects within MGA zone 54 are contained in this web service. This service will continually be updated with additional datasets. WMS 1.3.0:http://www.ga.gov.au/gisimg/services/topography/DSM_LiDAR_MGAZone54/ImageServer/WMSServer?request=GetCapabilities&service=WMS
WCS: http://www.ga.gov.au/gisimg/services/topography/DSM_LiDAR_MGAZone54/ImageServer/WCSServer?request=GetCapabilities&service=WCS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/topography/DSM_LiDAR_MGAZone54/ImageServer
  DSM_LiDAR_MGAZone55 DSMs derived from LiDAR data from a number of different elevation projects within MGA zone 55 are contained in this web service. This service will continually be updated with additional datasets. WMS 1.3.0:http://www.ga.gov.au/gisimg/services/topography/DSM_LiDAR_MGAZone55/ImageServer/WMSServer?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/gisimg/services/topography/DSM_LiDAR_MGAZone55/ImageServer/WCSServer?request=GetCapabilities&service=WCS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/topography/DSM_LiDAR_MGAZone55/ImageServer
  DSM_LiDAR_MGAZone56 DSMs derived from LiDAR data from a number of different elevation projects within MGA zone 56 are contained in this web service. This service will continually be updated with additional datasets. WMS 1.3.0:http://www.ga.gov.au/gisimg/services/topography/DSM_LiDAR_MGAZone56/ImageServer/WMSServer?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/gisimg/services/topography/DSM_LiDAR_MGAZone56/ImageServer/WCSServer?request=GetCapabilities&service=WCS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/topography/DSM_LiDAR_MGAZone56/ImageServer
  dem_1s 1 second SRTM Digital Elevation Model of Australia WMS 1.3.0:http://www.ga.gov.au/gisimg/services/topography/dem_1s/ImageServer/WMSServer?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/gisimg/services/topography/dem_1s/ImageServer/WCSServer?request=GetCapabilities&service=WCS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/topography/dem_1s/ImageServer
  dem_h_1s 1 second SRTM Digital Elevation Model - Hydrologically Enforced WMS 1.3.0:http://www.ga.gov.au/gisimg/services/topography/dem_h_1s/ImageServer/WMSServer?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/gisimg/services/topography/dem_h_1s/ImageServer/WCSServer?request=GetCapabilities&service=WCS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/topography/dem_h_1s/ImageServer
  dem_s_1s 1 second SRTM Digital Elevation Model - Smoothed WMS 1.3.0:http://www.ga.gov.au/gisimg/services/topography/dem_s_1s/ImageServer/WMSServer?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/gisimg/services/topography/dem_s_1s/ImageServer/WCSServer?request=GetCapabilities&service=WCS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/topography/dem_s_1s/ImageServer
  dem_s_aspect Aspect derived from 1 second Digital Elevation Model - Smoothed WMS 1.3.0:http://www.ga.gov.au/gisimg/services/topography/dem_s_aspect/ImageServer/WMSServer?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/gisimg/services/topography/dem_s_aspect/ImageServer/WCSServer?request=GetCapabilities&service=WCS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/topography/dem_s_aspect/ImageServer
  dem_s_slopepct Percent slope derived from 1 second Digital Elevation Model - Smoothed WMS 1.3.0:http://www.ga.gov.au/gisimg/services/topography/dem_s_slopepct/ImageServer/WMSServer?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/gisimg/services/topography/dem_s_slopepct/ImageServer/WCSServer?request=GetCapabilities&service=WCS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/topography/dem_s_slopepct/ImageServer
  DEM_SRTM_1Second_Hillshade_315Azimuth
_30Altitude
This hillshade is derived from the 1 arc second (~30m) Shuttle Radar Topographic Mission (SRTM) gridded Digital Elevation Model (DEM) Version 1.0. The DEM represents ground surface topography and excludes vegetation features. The sun angle used is 315 degrees azimuth and 30 degrees altitude. It is intended for large scale use for low lying area feature identification. The SRTM data was acquired by NASA in February 2000 and was publicly released under Creative Commons licensing from November 2011 in ESRI Grid format. The SRTM DEM has quite different characteristics to DEMs derived by interpolation from topographic data. Those DEMs are typically quite smooth and are based on fairly accurate but sparse source data, usually contours and spot heights supplemented by drainage lines. The SRTM data is derived from radar measurements that are dense (there is essentially a measurement at almost every grid cell) but noisy. The main processing of the SRTM DEM product has included: stripe removal, void filling and vegetation offset removal. Processing methods are further described in the 1 second SRTM Derived Products User Guide (Geoscience Australia, 2011). WMS 1.3.0:http://www.ga.gov.au/gisimg/services/topography/DEM_SRTM_1Second_Hillshade_315Azimuth_30Altitude/ImageServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/topography/DEM_SRTM_1Second_Hillshade_315Azi muth_30Altitude/ImageServer
  DEM_SRTM_1Second_Hillshade_315Azimuth
_45Altitude
This hillshade is derived from the 1 arc second (~30m) Shuttle Radar Topographic Mission (SRTM) gridded Digital Elevation Model (DEM) Version 1.0. The DEM represents ground surface topography and excludes vegetation features. The sun angle used is 315 degrees azimuth and 45 degrees altitude. It is intended for large scale use for low lying area feature identification. The SRTM data was acquired by NASA in February 2000 and was publicly released under Creative Commons licensing from November 2011 in ESRI Grid format. The SRTM DEM has quite different characteristics to DEMs derived by interpolation from topographic data. Those DEMs are typically quite smooth and are based on fairly accurate but sparse source data, usually contours and spot heights supplemented by drainage lines. The SRTM data is derived from radar measurements that are dense (there is essentially a measurement at almost every grid cell) but noisy. The main processing of the SRTM DEM product has included: stripe removal, void filling and vegetation offset removal. Processing methods are further described in the 1 second SRTM Derived Products User Guide (Geoscience Australia, 2011). WMS 1.3.0:http://www.ga.gov.au/gisimg/services/topography/DEM_SRTM_1Second_Hillshade_315Azimuth_45Altitude/ImageServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/topography/DEM_SRTM_1Second_Hillshade_315Azi muth_45Altitude/ImageServer
  DEM_SRTM_1Second_Hillshade_45Azimuth
_30Altitude
This hillshade is derived from the 1 arc second (~30m) Shuttle Radar Topographic Mission (SRTM) gridded Digital Elevation Model (DEM) Version 1.0. The DEM represents ground surface topography and excludes vegetation features. The sun angle used is 45 degrees azimuth and 30 degrees altitude. It is intended for large scale use for low lying area feature identification. The SRTM data was acquired by NASA in February 2000 and was publicly released under Creative Commons licensing from November 2011 in ESRI Grid format. The SRTM DEM has quite different characteristics to DEMs derived by interpolation from topographic data. Those DEMs are typically quite smooth and are based on fairly accurate but sparse source data, usually contours and spot heights supplemented by drainage lines. The SRTM data is derived from radar measurements that are dense (there is essentially a measurement at almost every grid cell) but noisy. The main processing of the SRTM DEM product has included: stripe removal, void filling and vegetation offset removal. Processing methods are further described in the 1 second SRTM Derived Products User Guide (Geoscience Australia, 2011). WMS 1.3.0:http://www.ga.gov.au/gisimg/services/topography/DEM_SRTM_1Second_Hillshade_45Azimuth_30Altitude/ImageServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/topography/DEM_SRTM_1Second_Hillshade_45Azimu th_30Altitude/ImageServer
  DEM_SRTM_1Second_Hillshade_45Azimuth
_45Altitude
This hillshade is derived from the 1 arc second (~30m) Shuttle Radar Topographic Mission (SRTM) gridded Digital Elevation Model (DEM) Version 1.0. The DEM represents ground surface topography and excludes vegetation features. The sun angle used is 45 degrees azimuth and 45 degrees altitude. It is intended for large scale use for low lying area feature identification. The SRTM data was acquired by NASA in February 2000 and was publicly released under Creative Commons licensing from November 2011 in ESRI Grid format. The SRTM DEM has quite different characteristics to DEMs derived by interpolation from topographic data. Those DEMs are typically quite smooth and are based on fairly accurate but sparse source data, usually contours and spot heights supplemented by drainage lines. The SRTM data is derived from radar measurements that are dense (there is essentially a measurement at almost every grid cell) but noisy. The main processing of the SRTM DEM product has included: stripe removal, void filling and vegetation offset removal. Processing methods are further described in the 1 second SRTM Derived Products User Guide (Geoscience Australia, 2011). WMS 1.3.0:http://www.ga.gov.au/gisimg/services/topography/DEM_SRTM_1Second_Hillshade_45Azimuth_45Altitude/ImageServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/topography/DEM_SRTM_1Second_Hillshade_45Azimu th_45Altitude/ImageServer
  Dynamic_National_Map_Culture_and_Infrastructure This service has been created specifically for display in the National Map and the chosen symbology may not suit other mapping applications. These data are best suited to graphical applications. These data may vary greatly in quality depending on the method of capture and digitising specifications in place at the time of capture. The Australian Topographic web map service is seamless national dataset coverage for the whole of Australia. The map portrays detailed graphic representation of features that appear on the Earth's surface. These features include culture, habitation, industry and utility themes from the Geoscience Australia 250K Topographic Data. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/Dynamic_National_Map_Culture_and_Infrastructure/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/Dynamic_National_Map_Culture_and_Infrastructure/MapServer
  Dynamic_National_Map_Elevation_Relief_and_Physiography This service has been created specifically for display in the National Map and the chosen symbology may not suit other mapping applications. These data are best suited to graphical applications. These data may vary greatly in quality depending on the method of capture and digitising specifications in place at the time of capture. The Australian Topographic web map service is seamless national dataset coverage for the whole of Australia. The web map service portrays detailed graphic representation of features that appear on the Earth's surface. These features include the relief and physiography themes from the Geoscience Australia 250K Topographic Data. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/Dynamic_National_Map_Elevation_Relief_and_Physiography/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/Dynamic_National_Map_Elevation_Relief_and_Physiography/MapServer
  Dynamic_National_Map_Hydrography_and_Marine This service has been created specifically for display in the National Map and the symbology displayed may not suit other mapping applications. The AusHydro dataset represents the Australia's surface hydrology at a national scale. It includes natural and man-made geographic features such as: watercourse areas, swamps, reservoirs, canals, etc. This product presents hydrology polygon, point and line features which topologically connect and forms a complete flow path network for the entire continent of Australia. The GEODATA 250K data are best suited to graphical applications. These data may vary greatly in quality depending on the method of capture and digitising specifications in place at the time of capture. These features include the culture, drainage, hydrography, waterbodies and marine themes. Some datasets reflects the increasing data from scale to scale. The data is sourced from Geoscience Australia 250K Topographic data and AusHydro_V_2_0 data. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/Dynamic_National_Map_Hydrography_and_Marine/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/Dynamic_National_Map_Hydrography_and_Marine/MapServer
  Dynamic_National_Map_Labelling_and_Boundaries This service has been created specifically for display in the National Map and the chosen symbology may not suit other mapping applications. These data are best suited to graphical applications. These data may vary greatly in quality depending on the method of capture and digitising specifications in place at the time of capture. The Australian Topographic web map service is seamless national dataset coverage for the whole of Australia. The map portrays detailed graphic representation of features that appear on the Earth's surface. These features include framework and habitation themes. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/Dynamic_National_Map_Labelling_and_Boundaries/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/Dynamic_National_Map_Labelling_and_Boundaries/MapServer
  Dynamic_National_Map_Reserves This service has been created specifically for display in the National Map and the chosen symbology may not suit other mapping applications. The Australian Topographic web map service is seamless national dataset coverage for the whole of Australia. These data are best suited to graphical applications. These data may vary greatly in quality depending on the method of capture and digitising specifications in place at the time of capture. The web map service portrays detailed graphic representation of features that appear on the Earth's surface. These features include the administration theme from the Geoscience Australia 250K Topographic Data. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/Dynamic_National_Map_Reserves/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/Dynamic_National_Map_Reserves/MapServer
  Dynamic_National_Map_Transport This service has been created specifically for display in the National Map and the chosen symbology may not suit other mapping applications. The Australian Topographic web map service is seamless national dataset coverage for the whole of Australia. These data are best suited to graphical applications. These data may vary greatly in quality depending on the method of capture and digitising specifications in place at the time of capture. The web map service portrays detailed graphic representation of features that appear on the Earth's surface. These features include aviation, physiography, road transport and rail transport themes from the Geoscience Australia 250K Topographic Data. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/Dynamic_National_Map_Transport/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/Dynamic_National_Map_Transport/MapServer
  Dynamic_National_Map_Vegetation This service has been created specifically for display in the National Map and the chosen symbology may not suit other mapping applications. The Australian Topographic map service is seamless national dataset coverage for the whole of Australia. These data are best suited to graphical applications. These data may vary greatly in quality depending on the method of capture and digitising specifications in place at the time of capture. The web map service portrays detailed graphic representation of features that appear on the Earth's surface. These features include vegetation theme from the Geoscience Australia 250K Topographic Data. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/Dynamic_National_Map_Vegetation/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/Dynamic_National_Map_Vegetation/MapServer
  Flow direction grid for the 9 second Digital
Elevation Model of Australia Version 3
  WMS 1.3.0:http://www.ga.gov.au/thredds/wms/national_grids/d8-9s.nc
WCS:http://www.ga.gov.au/thredds/wcs/national_grids/d8-9s.nc
  GazetteerOfAustralia Place Name Geocoding Service ESRI GeocodeServer:http://www.ga.gov.au/gis/rest/services/topography/GazetteerOfAustralia/GeocodeServer
  Global_Map   WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/Global_Map/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/topography/Global_Map/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/Global_Map/MapServer
  National_Electricity_Transmission_Lines The National Electricity Transmission Lines dataset presents the spatial location; in line format, of all known high voltage electricity transmission lines that make up the electricity transmission network within Australia. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/National_Electricity_Transmission_Lines/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/topography/National_Electricity_Transmission_Lines/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/National_Electricity_Transmission_Lines/MapServer
  National_Electricity_Transmission_Substations This National Electricity Transmission Substations dataset presents the spatial locations; in point format, of all known electricity transmission substations within Australia. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/National_Electricity_Transmission_Substations/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/topography/National_Electricity_Transmission_Substations/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/National_Electricity_Transmission_Substations/MapServer
  National_Ferry_Terminals This point dataset contains ferry terminals in Australian waters that include infrastructure facilities for maritime vessels to load and unload passengers and/or vehicles. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/National_Ferry_Terminals/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/topography/National_Ferry_Terminals/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/National_Ferry_Terminals/MapServer
  National_Major_Ports This point dataset contains major ports in Australian waters that include infrastructure facilities where maritime vessels have the ability to load and unload commodities. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/National_Major_Ports/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/topography/National_Major_Ports/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/National_Major_Ports/MapServer
  National_Map_Basemap_WM The Australian Topographic map service is a seamless national dataset coverage for the whole of Australia. The map portrays detailed graphic representation of features that appear on the Earth's surface. These features include cultural, hydrography and relief themes. Some datasets have a number from 1 and upwards, this number reflects the increasing data from scale to scale. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/National_Map_Basemap_WM/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/National_Map_Basemap_WM/MapServer/WMSServer
  National_Onshore_Gas_Pipelines The National Onshore Gas Pipelines Dataset represents the spatial locations of pipelines for the transmission of natural gas within mainland Australia complimented with feature attribution. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/National_Onshore_Gas_Pipelines/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/topography/National_Onshore_Gas_Pipelines/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/National_Onshore_Gas_Pipelines/MapServer
  National_Onshore_Oil_Pipelines The National Onshore Oil Pipelines Dataset represents the spatial locations of pipelines for the transmission of oil within mainland Australia complimented with feature attribution. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/National_Onshore_Oil_Pipelines/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/topography/National_Onshore_Oil_Pipelines/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/National_Onshore_Oil_Pipelines/MapServer
  National_Submarine_Canyons_of_Australia This service identifies the location of 713 submarine canyons surrounding mainland Australia with associated metrics. WMS 1.3.0:http://www.ga.gov.au/gis/services/marine_coastal/National_Submarine_Canyons_of_Australia/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/marine_coastal/National_Submarine_Canyons_of_Australia/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/marine_coastal/National_Submarine_Canyons_of_Australia/MapServer
  National_Waste_Management_Facilities The National Waste Management Dataset (upgraded) presents the spatial locations of Australia's known landfills, waste transfer stations and a large number of waste reprocessing facilities. The data are a compilation of Australian, jurisdictional government, council and industry databases. The purpose of the National Waste Management Dataset is to support decision makers from industry, governments and other interested parties make better, more informed decisions based on evidence based information. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/National_Waste_Management_Facilities/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/topography/National_Waste_Management_Facilities/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/National_Waste_Management_Facilities/MapServer
  NATMAP_Digital_Maps_250K_2008Edition   WMS 1.3.0:http://www.ga.gov.au/gisimg/services/topography/NATMAP_Digital_Maps_250K_2008Edition/ImageServer/WMSServer?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/gisimg/services/topography/NATMAP_Digital_Maps_250K_2008Edition/ImageServer/WCSServer?request=GetCapabilities&service=WCS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/topography/NATMAP_Digital_Maps_250K_2008Edition/ImageSer ver
  NATMAP_Digital_Maps_250K_2008Edition_WM   WMS 1.3.0:http://www.ga.gov.au/gisimg/services/topography/NATMAP_Digital_Maps_250K_2008Edition_WM/MapServer/WMSServer?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/gisimg/services/topography/NATMAP_Digital_Maps_250K_2008Edition_WM/MapServer/WCSServer?request=GetCapabilities&service=WCS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/topography/NATMAP_Digital_Maps_250K_2008Edition_WM/MapS erver
  Shoreline_WM   WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/Shoreline_WM/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/Shoreline_WM/MapServer
  sMurrayDarling2013 This service is for the Murray Darling Basin Elevation Project LiDAR derived 1m Digital Surface Model, and will be continually updated as each new acquisition is delivered. WCS:http://www.ga.gov.au/gisimg/services/topography/sMurrayDarling2013/ImageServer/WCSServer?request=GetCapabilities&service=WCS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/topography/sMurrayDarling2013/ImageServer
  World_Bathy The world bathy service is comprised of free data sources from around the web. WMS 1.3.0:http://www.ga.gov.au/gisimg/services/topography/World_Bathy/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/topography/World_Bathy/MapServer
  World_Bathymetry_Image_WM The world bathymetry image service is comprised of free data sources from around the web. Made with Natural Earth (http://www.naturalearthdata.com/). Contains the Natural Earth 1 with Shaded Relief and Water Raster at 1:50m scale. WMS 1.3.0:http://www.ga.gov.au/gisimg/services/topography/World_Bathymetry_Image_WM/MapServer/WMSServer?request=GetCapabilities&service=WMS
WCS:http://www.ga.gov.au/gisimg/services/topography/World_Bathymetry_Image_WM/MapServer/WCSServer?request=GetCapabilities&service=WCS
ESRI REST Page:http://www.ga.gov.au/gisimg/rest/services/topography/World_Bathymetry_Image_WM/MapServer
  World_Political_Boundaries_WM The world boundaries service is comprised of free data sources from around the web. Made with Natural Earth (http://www.naturalearthdata.com/). Contains the Admin 0 - Countries cultural layer. WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/World_Political_Boundaries_WM/MapServer/WMSServer?request=GetCapabilities&service=WMS
WFS 1.1.0:http://www.ga.gov.au/gis/services/topography/World_Political_Boundaries_WM/MapServer/WFSServer?request=GetCapabilities&service=WFS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/World_Political_Boundaries_WM/MapServer
  World_Simple   WMS 1.3.0:http://www.ga.gov.au/gis/services/topography/World_Simple/MapServer/WMSServer?request=GetCapabilities&service=WMS
ESRI REST Page:http://www.ga.gov.au/gis/rest/services/topography/World_Simple/MapServer