Earthquake Details



Station map

The following map shows the location of the stations that detected this earthquake.
Note: This map may not include all non-Geoscience Australia stations. Check the phase arrivals list below for all information


Phase arrivals

The following table lists the phase arrivals associated with this earthquake.

Station ID Station Name Phase Arrival (UTC) Signal to Noise Ratio Residual(s) Distance (km) Azimuth (°) Use of Phases
MTN MANTON DAM DARWIN NT P 02/10/2012  06:30:28.42 3.66 0.02 2498 159 Defining
KDU KAKADU, NT P 02/10/2012  06:30:31.43 38.27 -0.72 2537 156 Defining
KNRA KUNUNURRA, WA P 02/10/2012  06:30:48.44 11.88 0.98 2725 167 Defining
XMI CHRISTMAS ISLAND AIRPORT, AUSTRALIA P 02/10/2012  06:30:57.45 -1.00 0.47 2843 223 Defining
FITZ FITZROY CROSSING, WA P 02/10/2012  06:31:04.46 41.14 -0.69 2938 175 Defining
COEN COEN, QLD P 02/10/2012  06:31:45.50 6.28 0.12 3305 138 Defining
QIS MOUNT ISA, QLD P 02/10/2012  06:32:07.52 4.29 0.88 3666 151 Defining
WRKA WARAKURNA, WA P 02/10/2012  06:32:07.52 41.16 -0.69 3738 172 Defining
MEEK MEEKATHARRA, WA P 02/10/2012  06:32:20.54 4.20 -1.65 3908 187 Defining
MORW MORAWA, WA P 02/10/2012  06:32:44.56 4.30 -1.03 4218 190 Defining
FORT FORREST, WA P 02/10/2012  06:32:56.57 9.76 -0.47 4367 173 Defining
NWAO NARROGIN, WA P 02/10/2012  06:33:14.59 4.54 -0.76 4620 188 Defining
BBOO BUCKLEBOO, SA P 02/10/2012  06:33:25.60 10.31 -0.37 4761 164 Defining
STKA STEPHENS CREEK, NSW P 02/10/2012  06:33:33.61 24.60 -0.04 4868 157 Defining
HTT HALLETT, SA P 02/10/2012  06:33:37.61 15.09 0.02 4920 161 Defining
CMSA COBAR, NSW P 02/10/2012  06:33:45.62 15.83 0.36 5026 153 Defining
ARPS MT ARAPILES, VIC P 02/10/2012  06:34:08.64 8.52 0.03 5367 160 Defining
TOO TOOLANGI, VIC P 02/10/2012  06:34:25.66 5.70 0.92 5594 157 Defining
CNB KOWEN FOREST, ACT P 02/10/2012  06:34:30.67 5.29 0.83 5564 152 Defining
CASY CASEY, ANTARCTICA P 02/10/2012  06:37:08.82 6.83 -1.36 8353 185 Defining
VOI VOHITSOKA, MADAGASCAR P 02/10/2012  06:37:40.86 10.49 -0.56 8993 246 Defining

Data and seismograms

This site is under re-development. In the interim, data from Geoscience Australia's Seismograph Network can be accessed from the IRIS Data Management Centre.

Follow this link to view. Alternatively, follow this link to download the data from the IRIS SEEDlink server.

Important: Read about the limitations of this data.
Data retrieved: 09/12/2016 @ 02:06:08 (UTC)