Earthquake Details



Station map

The following map shows the location of the stations that detected this earthquake.
Note: This map may not include all non-Geoscience Australia stations. Check the phase arrivals list below for all information


Phase arrivals

The following table lists the phase arrivals associated with this earthquake.

Station ID Station Name Phase Arrival (UTC) Signal to Noise Ratio Residual(s) Distance (km) Azimuth (°) Use of Phases
COEN COEN, QLD P 29/12/2012  08:02:14.13 5.26 0.99 1296 206 Defining
MTSU MOUNT SURPRISE, QLD P 29/12/2012  08:02:55.17 8.94 0.44 1687 195 Defining
CTAO CHARTERS TOWERS, AUSTRALIA P 29/12/2012  08:03:18.19 3.08 -0.51 1856 187 Defining
KDU KAKADU, NT P 29/12/2012  08:03:32.21 20.69 0.17 2034 239 Defining
QIS MOUNT ISA, QLD P 29/12/2012  08:03:42.22 12.67 0.75 2123 206 Defining
EIDS EIDSVOLD STATION, QLD P 29/12/2012  08:04:12.25 7.69 -0.43 2444 174 Defining
RMQ ROMA, QLD P 29/12/2012  08:04:21.26 7.81 -1.12 2553 179 Defining
KNRA KUNUNURRA, WA P 29/12/2012  08:04:23.26 4.32 0.94 2546 237 Defining
QLP QUILPIE, QLD P 29/12/2012  08:04:27.26 6.68 0.05 2603 190 Defining
ARMA ARMIDALE, NSW P 29/12/2012  08:04:59.29 4.45 -0.69 3009 174 Defining
FITZ FITZROY CROSSING, WA P 29/12/2012  08:04:59.29 31.17 -0.50 2969 235 Defining
WRKA WARAKURNA, WA P 29/12/2012  08:05:17.31 10.48 -0.11 3223 220 Defining
HTT HALLETT, SA P 29/12/2012  08:05:38.33 4.27 1.38 3471 196 Defining
BBOO BUCKLEBOO, SA P 29/12/2012  08:05:39.33 6.20 -0.01 3505 200 Defining
FORT FORREST, WA P 29/12/2012  08:05:57.35 7.92 -0.17 3712 213 Defining
MEEK MEEKATHARRA, WA P 29/12/2012  08:06:25.38 7.09 0.23 4089 228 Defining
KLBR KELLERBERRIN, WA P 29/12/2012  08:06:53.41 8.10 -0.43 4480 222 Defining
BLDU BALLIDU, WA P 29/12/2012  08:06:55.41 9.80 -0.22 4494 224 Defining
NWAO NARROGIN, WA P 29/12/2012  08:07:04.42 5.41 0.46 4610 221 Defining
MAW MAWSON, ANTARCTICA P 29/12/2012  08:11:57.71 9.32 1.01 9467 202 Defining

Data and seismograms

This site is under re-development. In the interim, data from Geoscience Australia's Seismograph Network can be accessed from the IRIS Data Management Centre.

Follow this link to view. Alternatively, follow this link to download the data from the IRIS SEEDlink server.

Important: Read about the limitations of this data.
Data retrieved: 11/12/2016 @ 04:19:45 (UTC)