Earthquake Details



Station map

The following map shows the location of the stations that detected this earthquake.
Note: This map may not include all non-Geoscience Australia stations. Check the phase arrivals list below for all information


Phase arrivals

The following table lists the phase arrivals associated with this earthquake.

Station ID Station Name Phase Arrival (UTC) Signal to Noise Ratio Residual(s) Distance (km) Azimuth (°) Use of Phases
KDU KAKADU, NT P 01/01/2013  15:21:35.69 30.86 -1.36 1424 154 Defining
KNRA KUNUNURRA, WA P 01/01/2013  15:22:02.72 14.11 0.42 1629 173 Defining
FITZ FITZROY CROSSING, WA P 01/01/2013  15:22:31.75 13.30 -0.25 1890 184 Defining
COEN COEN, QLD P 01/01/2013  15:23:13.79 90.43 -0.14 2292 129 Defining
MBWA MARBLE BAR, WESTERN AUSTRALIA P 01/01/2013  15:23:22.80 5.15 0.21 2356 199 Defining
PSA00 PILBARA SEISMIC ARRAY ELEMENT 00, WA P 01/01/2013  15:23:25.80 6.39 0.82 2396 198 Defining
QIS MOUNT ISA, QLD P 01/01/2013  15:23:38.81 98.11 -1.42 2565 148 Defining
WRKA WARAKURNA, WA P 01/01/2013  15:23:48.82 29.24 -0.87 2662 177 Defining
MTSU MOUNT SURPRISE, QLD P 01/01/2013  15:23:50.83 10.95 -0.12 2686 136 Defining
ISG ISHIGAKI, RYUKYU ISKAND, JAPAN P 01/01/2013  15:24:06.84 3.72 0.52 2858 354 Defining
CTAO CHARTERS TOWERS, AUSTRALIA P 01/01/2013  15:24:15.85 14.08 0.83 2982 136 Defining
QLP QUILPIE, QLD P 01/01/2013  15:24:47.88 9.83 -0.25 3386 148 Defining
BBOO BUCKLEBOO, SA P 01/01/2013  15:25:08.90 9.76 -0.30 3652 166 Defining
STKA STEPHENS CREEK, NSW P 01/01/2013  15:25:16.91 21.93 -0.08 3753 157 Defining
HTT HALLETT, SA P 01/01/2013  15:25:20.92 7.33 0.28 3806 162 Defining
CMSA COBAR, NSW P 01/01/2013  15:25:29.92 14.83 0.16 3918 151 Defining
ARMA ARMIDALE, NSW P 01/01/2013  15:25:49.94 6.95 0.66 4177 144 Defining
ARPS MT ARAPILES, VIC P 01/01/2013  15:25:55.95 10.23 0.43 4253 160 Defining
YNG YOUNG, NSW P 01/01/2013  15:26:01.96 7.61 0.84 4315 151 Defining
TOO TOOLANGI, VIC P 01/01/2013  15:26:13.97 4.03 1.67 4480 157 Defining

Data and seismograms

This site is under re-development. In the interim, data from Geoscience Australia's Seismograph Network can be accessed from the IRIS Data Management Centre.

Follow this link to view. Alternatively, follow this link to download the data from the IRIS SEEDlink server.

Important: Read about the limitations of this data.
Data retrieved: 06/12/2016 @ 21:54:22 (UTC)