Earthquake Details



Station map

The following map shows the location of the stations that detected this earthquake.
Note: This map may not include all non-Geoscience Australia stations. Check the phase arrivals list below for all information


Phase arrivals

The following table lists the phase arrivals associated with this earthquake.

Station ID Station Name Phase Arrival (UTC) Signal to Noise Ratio Residual(s) Distance (km) Azimuth (°) Use of Phases
EIDS EIDSVOLD STATION, QLD P 03/02/2013  04:02:06.12 4.44 0.23 2215 221 Defining
CTAO CHARTERS TOWERS, AUSTRALIA P 03/02/2013  04:02:13.13 16.64 0.42 2295 241 Defining
MTSU MOUNT SURPRISE, QLD P 03/02/2013  04:02:24.14 24.75 0.11 2410 248 Defining
COEN COEN, QLD P 03/02/2013  04:02:27.14 15.82 0.29 2438 259 Defining
RMQ ROMA, QLD P 03/02/2013  04:02:30.15 6.85 0.92 2470 223 Defining
ARMA ARMIDALE, NSW P 03/02/2013  04:02:43.16 3.62 -0.20 2607 211 Defining
QLP QUILPIE, QLD P 03/02/2013  04:03:02.18 8.86 -0.30 2831 229 Defining
QIS MOUNT ISA, QLD P 03/02/2013  04:03:12.19 8.76 0.17 2963 245 Defining
CMSA COBAR, NSW P 03/02/2013  04:03:24.20 8.01 -0.18 3073 218 Defining
STKA STEPHENS CREEK, NSW P 03/02/2013  04:03:45.22 5.31 -0.07 3388 223 Defining
TOO TOOLANGI, VIC P 03/02/2013  04:04:01.24 4.94 -0.35 3584 210 Defining
HTT HALLETT, SA P 03/02/2013  04:04:17.25 4.05 0.16 3692 223 Defining
BBOO BUCKLEBOO, SA P 03/02/2013  04:04:24.26 4.94 -1.00 3872 226 Defining
WRKA WARAKURNA, WA P 03/02/2013  04:04:49.28 31.05 -0.80 4217 243 Defining
FITZ FITZROY CROSSING, WA P 03/02/2013  04:05:00.30 7.56 -0.38 4351 255 Defining
MEEK MEEKATHARRA, WA P 03/02/2013  04:06:02.36 16.60 0.44 5202 243 Defining
MORW MORAWA, WA P 03/02/2013  04:06:23.38 5.61 0.28 5502 241 Defining
NWAO NARROGIN, WA P 03/02/2013  04:06:28.38 4.43 1.17 5489 236 Defining
MUN MUNDARING, WA P 03/02/2013  04:06:33.39 3.16 0.71 5556 237 Defining
QSPA SOUTH POLE REMOTE EARTH SCIENCE OBS., ANTARCTICA P 03/02/2013  04:09:38.57 -1.00 -0.16 8811 180 Defining

Data and seismograms

This site is under re-development. In the interim, data from Geoscience Australia's Seismograph Network can be accessed from the IRIS Data Management Centre.

Follow this link to view. Alternatively, follow this link to download the data from the IRIS SEEDlink server.

Important: Read about the limitations of this data.
Data retrieved: 09/12/2016 @ 05:59:04 (UTC)