Earthquake Details



Station map

The following map shows the location of the stations that detected this earthquake.
Note: This map may not include all non-Geoscience Australia stations. Check the phase arrivals list below for all information


Phase arrivals

The following table lists the phase arrivals associated with this earthquake.

Station ID Station Name Phase Arrival (UTC) Signal to Noise Ratio Residual(s) Distance (km) Azimuth (°) Use of Phases
EIDS EIDSVOLD STATION, QLD P 06/02/2013  00:50:32.83 5.31 -0.24 2163 220 Defining
CTAO CHARTERS TOWERS, AUSTRALIA P 06/02/2013  00:50:38.83 24.79 -0.40 2231 240 Defining
MTSU MOUNT SURPRISE, QLD P 06/02/2013  00:50:49.84 14.16 0.04 2344 247 Defining
COEN COEN, QLD P 06/02/2013  00:50:51.85 7.68 0.22 2370 259 Defining
RMQ ROMA, QLD P 06/02/2013  00:50:55.85 16.88 0.35 2416 222 Defining
ARMA ARMIDALE, NSW P 06/02/2013  00:51:07.86 9.55 -1.27 2563 210 Defining
QLP QUILPIE, QLD P 06/02/2013  00:51:27.88 11.30 0.59 2773 228 Defining
QIS MOUNT ISA, QLD P 06/02/2013  00:51:37.89 7.23 0.83 2897 245 Defining
CMSA COBAR, NSW P 06/02/2013  00:51:46.90 16.12 -0.74 3022 218 Defining
CNB KOWEN FOREST, ACT P 06/02/2013  00:51:56.91 4.59 1.16 3133 207 Defining
STKA STEPHENS CREEK, NSW P 06/02/2013  00:52:12.93 11.89 0.25 3335 222 Defining
KDU KAKADU, NT P 06/02/2013  00:52:26.94 3.56 -2.11 3522 263 Defining
TOO TOOLANGI, VIC P 06/02/2013  00:52:27.94 3.96 -0.22 3540 210 Defining
HTT HALLETT, SA P 06/02/2013  00:52:36.95 8.34 0.25 3638 222 Defining
BBOO BUCKLEBOO, SA P 06/02/2013  00:52:49.96 8.33 -0.60 3816 226 Defining
KNRA KUNUNURRA, WA P 06/02/2013  00:52:58.97 3.90 -0.47 3932 258 Defining
WRKA WARAKURNA, WA P 06/02/2013  00:53:14.99 14.88 -0.79 4152 243 Defining
FITZ FITZROY CROSSING, WA P 06/02/2013  00:53:25.00 7.54 0.04 4284 255 Defining
FORT FORREST, WA P 06/02/2013  00:53:34.01 9.84 -0.35 4383 234 Defining
MEEK MEEKATHARRA, WA P 06/02/2013  00:54:33.07 4.08 0.63 5137 243 Defining
NWAO NARROGIN, WA P 06/02/2013  00:54:50.09 4.28 2.48 5427 235 Defining

Data and seismograms

This site is under re-development. In the interim, data from Geoscience Australia's Seismograph Network can be accessed from the IRIS Data Management Centre.

Follow this link to view. Alternatively, follow this link to download the data from the IRIS SEEDlink server.

Important: Read about the limitations of this data.
Data retrieved: 08/12/2016 @ 14:19:24 (UTC)