Earthquake Details



Station map

The following map shows the location of the stations that detected this earthquake.
Note: This map may not include all non-Geoscience Australia stations. Check the phase arrivals list below for all information


Phase arrivals

The following table lists the phase arrivals associated with this earthquake.

Station ID Station Name Phase Arrival (UTC) Signal to Noise Ratio Residual(s) Distance (km) Azimuth (°) Use of Phases
CTAO CHARTERS TOWERS, AUSTRALIA P 06/02/2013  05:53:29.00 5.04 0.54 2233 242 Defining
MTSU MOUNT SURPRISE, QLD P 06/02/2013  05:53:40.02 7.51 0.32 2351 248 Defining
COEN COEN, QLD P 06/02/2013  05:53:43.02 7.77 0.28 2387 260 Defining
RMQ ROMA, QLD P 06/02/2013  05:53:48.02 4.14 0.42 2403 223 Defining
ARMA ARMIDALE, NSW P 06/02/2013  05:53:58.03 6.92 -0.33 2542 211 Defining
QLP QUILPIE, QLD P 06/02/2013  05:54:17.05 6.00 0.74 2765 229 Defining
QIS MOUNT ISA, QLD P 06/02/2013  05:54:29.06 10.72 -0.60 2903 246 Defining
YNG YOUNG, NSW P 06/02/2013  05:54:42.08 5.18 -0.34 3070 211 Defining
STKA STEPHENS CREEK, NSW P 06/02/2013  05:55:02.10 5.01 0.69 3322 223 Defining
WAKE WAKE ISLAND, USA P 06/02/2013  05:55:09.10 3.28 1.44 3403 3 Defining
KDU KAKADU, NT P 06/02/2013  05:55:18.11 5.70 -0.45 3541 264 Defining
TOO TOOLANGI, VIC P 06/02/2013  05:55:18.11 5.61 0.40 3518 210 Defining
ARPS MT ARAPILES, VIC P 06/02/2013  05:55:26.12 5.40 0.60 3668 215 Defining
HTT HALLETT, SA P 06/02/2013  05:55:26.12 5.14 0.33 3626 223 Defining
BBOO BUCKLEBOO, SA P 06/02/2013  05:55:40.14 5.83 -0.56 3806 226 Defining
KNRA KUNUNURRA, WA P 06/02/2013  05:55:49.14 26.60 -0.96 3947 259 Defining
WRKA WARAKURNA, WA P 06/02/2013  05:56:06.16 10.53 -0.22 4156 243 Defining
FITZ FITZROY CROSSING, WA P 06/02/2013  05:56:16.17 19.55 -0.65 4296 255 Defining
PSA00 PILBARA SEISMIC ARRAY ELEMENT 00, WA P 06/02/2013  05:57:04.22 6.77 0.23 4936 251 Defining
MBWA MARBLE BAR, WESTERN AUSTRALIA P 06/02/2013  05:57:05.22 4.90 0.13 4944 251 Defining
MEEK MEEKATHARRA, WA P 06/02/2013  05:57:19.23 3.24 0.20 5141 244 Defining

Data and seismograms

This site is under re-development. In the interim, data from Geoscience Australia's Seismograph Network can be accessed from the IRIS Data Management Centre.

Follow this link to view. Alternatively, follow this link to download the data from the IRIS SEEDlink server.

Important: Read about the limitations of this data.
Data retrieved: 10/12/2016 @ 03:15:52 (UTC)