Earthquake Details



Station map

The following map shows the location of the stations that detected this earthquake.
Note: This map may not include all non-Geoscience Australia stations. Check the phase arrivals list below for all information


Phase arrivals

The following table lists the phase arrivals associated with this earthquake.

Station ID Station Name Phase Arrival (UTC) Signal to Noise Ratio Residual(s) Distance (km) Azimuth (°) Use of Phases
EIDS EIDSVOLD STATION, QLD P 10/02/2013  10:41:22.88 21.45 0.48 2329 224 Defining
BN1H BRISBANE HARD ROCK JUMP, QLD P 10/02/2013  10:41:24.88 -1.00 0.23 2355 216 Defining
CTAO CHARTERS TOWERS, AUSTRALIA P 10/02/2013  10:41:32.89 6.01 -0.03 2444 242 Defining
MTSU MOUNT SURPRISE, QLD P 10/02/2013  10:41:44.90 18.11 -0.06 2567 249 Defining
RMQ ROMA, QLD P 10/02/2013  10:41:46.90 7.33 0.08 2587 225 Defining
ARMA ARMIDALE, NSW P 10/02/2013  10:41:55.91 7.26 0.01 2697 214 Defining
QIS MOUNT ISA, QLD P 10/02/2013  10:42:29.94 3.51 -0.42 3117 246 Defining
STKA STEPHENS CREEK, NSW P 10/02/2013  10:43:00.98 6.77 -0.25 3504 224 Defining
TOO TOOLANGI, VIC P 10/02/2013  10:43:13.99 5.22 -0.66 3671 212 Defining
KDU KAKADU, NT P 10/02/2013  10:43:20.00 3.80 -0.58 3758 263 Defining
HTT HALLETT, SA P 10/02/2013  10:43:24.00 6.04 -0.16 3808 224 Defining
BBOO BUCKLEBOO, SA P 10/02/2013  10:43:38.01 6.48 -0.41 3995 227 Defining
KNRA KUNUNURRA, WA P 10/02/2013  10:43:52.03 4.20 0.17 4165 258 Defining
WRKA WARAKURNA, WA P 10/02/2013  10:44:06.04 3.64 -0.61 4368 243 Defining
FITZ FITZROY CROSSING, WA P 10/02/2013  10:44:17.05 15.69 0.12 4514 255 Defining
PSA00 PILBARA SEISMIC ARRAY ELEMENT 00, WA P 10/02/2013  10:45:04.10 5.70 0.91 5154 250 Defining
MBWA MARBLE BAR, WESTERN AUSTRALIA P 10/02/2013  10:45:05.10 6.21 0.58 5161 251 Defining
MEEK MEEKATHARRA, WA P 10/02/2013  10:45:18.11 7.55 0.37 5354 244 Defining
MORW MORAWA, WA P 10/02/2013  10:45:39.13 3.85 0.63 5650 241 Defining
QSPA SOUTH POLE REMOTE EARTH SCIENCE OBS., ANTARCTICA P 10/02/2013  10:48:43.32 6.32 0.00 8810 180 Defining

Data and seismograms

This site is under re-development. In the interim, data from Geoscience Australia's Seismograph Network can be accessed from the IRIS Data Management Centre.

Follow this link to view. Alternatively, follow this link to download the data from the IRIS SEEDlink server.

Important: Read about the limitations of this data.
Data retrieved: 04/12/2016 @ 12:13:19 (UTC)