Earthquake Details



Station map

The following map shows the location of the stations that detected this earthquake.
Note: This map may not include all non-Geoscience Australia stations. Check the phase arrivals list below for all information


Phase arrivals

The following table lists the phase arrivals associated with this earthquake.

Station ID Station Name Phase Arrival (UTC) Signal to Noise Ratio Residual(s) Distance (km) Azimuth (°) Use of Phases
EIDS EIDSVOLD STATION, QLD P 11/02/2013  20:14:28.66 9.44 -0.17 2197 222 Defining
CTAO CHARTERS TOWERS, AUSTRALIA P 11/02/2013  20:14:36.67 27.33 -0.34 2288 242 Defining
MTSU MOUNT SURPRISE, QLD P 11/02/2013  20:14:48.68 26.10 1.31 2408 248 Defining
COEN COEN, QLD P 11/02/2013  20:14:51.69 21.91 0.34 2443 260 Defining
RMQ ROMA, QLD P 11/02/2013  20:14:51.69 22.94 0.16 2453 223 Defining
ARMA ARMIDALE, NSW P 11/02/2013  20:15:02.70 21.36 -1.84 2584 212 Defining
QIS MOUNT ISA, QLD P 11/02/2013  20:15:34.73 25.82 -0.60 2959 246 Defining
CMSA COBAR, NSW P 11/02/2013  20:15:42.74 26.40 -0.06 3053 219 Defining
STKA STEPHENS CREEK, NSW P 11/02/2013  20:16:07.76 25.39 -0.08 3371 223 Defining
TOO TOOLANGI, VIC P 11/02/2013  20:16:22.78 8.23 -0.24 3560 211 Defining
HTT HALLETT, SA P 11/02/2013  20:16:31.79 12.27 -0.81 3675 223 Defining
ARPS MT ARAPILES, VIC P 11/02/2013  20:16:36.79 4.68 -1.48 3713 216 Defining
BBOO BUCKLEBOO, SA P 11/02/2013  20:16:45.80 8.66 -0.86 3857 227 Defining
KNRA KUNUNURRA, WA P 11/02/2013  20:16:56.81 9.13 -0.27 4003 259 Defining
WRKA WARAKURNA, WA P 11/02/2013  20:17:12.83 24.13 -0.25 4212 243 Defining
FITZ FITZROY CROSSING, WA P 11/02/2013  20:17:23.84 21.70 -0.64 4353 255 Defining
MBWA MARBLE BAR, WESTERN AUSTRALIA P 11/02/2013  20:18:11.89 11.78 0.62 5000 251 Defining
MEEK MEEKATHARRA, WA P 11/02/2013  20:18:26.90 12.57 1.07 5197 244 Defining
KLBR KELLERBERRIN, WA P 11/02/2013  20:18:39.91 5.76 0.42 5395 237 Defining
MORW MORAWA, WA P 11/02/2013  20:18:46.92 8.40 0.23 5495 241 Defining

Data and seismograms

This site is under re-development. In the interim, data from Geoscience Australia's Seismograph Network can be accessed from the IRIS Data Management Centre.

Follow this link to view. Alternatively, follow this link to download the data from the IRIS SEEDlink server.

Important: Read about the limitations of this data.
Data retrieved: 25/06/2017 @ 19:16:38 (UTC)