Earthquake Details



Station map

The following map shows the location of the stations that detected this earthquake.
Note: This map may not include all non-Geoscience Australia stations. Check the phase arrivals list below for all information


Phase arrivals

The following table lists the phase arrivals associated with this earthquake.

Station ID Station Name Phase Arrival (UTC) Signal to Noise Ratio Residual(s) Distance (km) Azimuth (°) Use of Phases
NIUE NIUE ISLAND, NIUE P 02/03/2013  01:21:59.31 -1.00 0.54 2335 110 Defining
CTAO CHARTERS TOWERS, AUSTRALIA P 02/03/2013  01:22:19.33 4.81 0.30 2583 249 Defining
RMQ ROMA, QLD P 02/03/2013  01:22:23.34 21.28 0.46 2628 231 Defining
ARMA ARMIDALE, NSW P 02/03/2013  01:22:26.34 11.83 0.08 2671 220 Defining
MTSU MOUNT SURPRISE, QLD P 02/03/2013  01:22:33.35 5.70 0.05 2737 254 Defining
COEN COEN, QLD P 02/03/2013  01:22:38.35 15.14 0.80 2825 264 Defining
CMSA COBAR, NSW P 02/03/2013  01:23:06.38 24.81 -0.45 3188 225 Defining
CNB KOWEN FOREST, ACT P 02/03/2013  01:23:07.38 12.33 -0.18 3207 215 Defining
STKA STEPHENS CREEK, NSW P 02/03/2013  01:23:33.41 33.76 0.30 3534 228 Defining
TOO TOOLANGI, VIC P 02/03/2013  01:23:40.42 13.53 0.01 3630 216 Defining
ARPS MT ARAPILES, VIC P 02/03/2013  01:23:54.43 6.43 0.15 3820 221 Defining
HTT HALLETT, SA P 02/03/2013  01:23:56.43 24.04 0.15 3837 228 Defining
KDU KAKADU, NT P 02/03/2013  01:24:07.44 29.54 0.21 3989 266 Defining
BBOO BUCKLEBOO, SA P 02/03/2013  01:24:10.45 37.94 0.15 4042 231 Defining
MTN MANTON DAM DARWIN NT P 02/03/2013  01:24:17.45 14.64 0.38 4133 266 Defining
KNRA KUNUNURRA, WA P 02/03/2013  01:24:34.47 21.36 0.15 4374 261 Defining
WRKA WARAKURNA, WA P 02/03/2013  01:24:44.48 33.81 0.40 4503 246 Defining
FORT FORREST, WA P 02/03/2013  01:24:55.49 23.06 0.20 4670 238 Defining
FITZ FITZROY CROSSING, WA P 02/03/2013  01:24:58.49 3.54 0.58 4706 257 Defining
MEEK MEEKATHARRA, WA P 02/03/2013  01:25:51.55 4.25 0.27 5488 246 Defining

Data and seismograms

This site is under re-development. In the interim, data from Geoscience Australia's Seismograph Network can be accessed from the IRIS Data Management Centre.

Follow this link to view. Alternatively, follow this link to download the data from the IRIS SEEDlink server.

Important: Read about the limitations of this data.
Data retrieved: 08/12/2016 @ 06:09:36 (UTC)