Earthquake Details



Station map

The following map shows the location of the stations that detected this earthquake.
Note: This map may not include all non-Geoscience Australia stations. Check the phase arrivals list below for all information


Phase arrivals

The following table lists the phase arrivals associated with this earthquake.

Station ID Station Name Phase Arrival (UTC) Signal to Noise Ratio Residual(s) Distance (km) Azimuth (°) Use of Phases
MTSU MOUNT SURPRISE, QLD P 30/09/2013  12:28:43.12 4.72 -0.16 1503 198 Defining
CTAO CHARTERS TOWERS, AUSTRALIA P 30/09/2013  12:29:09.14 3.67 0.43 1665 189 Defining
KDU KAKADU, NT P 30/09/2013  12:29:30.17 8.93 -0.63 1951 244 Defining
QIS MOUNT ISA, QLD P 30/09/2013  12:29:31.17 4.88 -0.12 1956 209 Defining
EIDS EIDSVOLD STATION, QLD P 30/09/2013  12:29:59.19 15.51 -0.77 2249 173 Defining
RMQ ROMA, QLD P 30/09/2013  12:30:17.21 4.93 0.44 2358 180 Defining
KNRA KUNUNURRA, WA P 30/09/2013  12:30:22.22 13.35 -0.26 2454 240 Defining
QLP QUILPIE, QLD P 30/09/2013  12:30:22.22 4.19 0.46 2413 191 Defining
INKA INNAMINCKA, SA P 30/09/2013  12:30:35.23 29.72 -1.12 2632 198 Defining
ARMA ARMIDALE, NSW P 30/09/2013  12:30:49.24 7.16 -1.66 2814 174 Defining
FITZ FITZROY CROSSING, WA P 30/09/2013  12:30:55.25 16.17 -0.01 2872 238 Defining
CMSA COBAR, NSW P 30/09/2013  12:31:01.26 6.16 0.14 2936 186 Defining
WRKA WARAKURNA, WA P 30/09/2013  12:31:13.27 7.66 0.19 3085 223 Defining
STKA STEPHENS CREEK, NSW P 30/09/2013  12:31:25.28 4.07 1.44 3046 193 Defining
HTT HALLETT, SA P 30/09/2013  12:31:41.30 3.26 1.03 3287 197 Defining
MBWA MARBLE BAR, WESTERN AUSTRALIA P 30/09/2013  12:31:55.31 3.51 1.25 3579 238 Defining
MEEK MEEKATHARRA, WA P 30/09/2013  12:32:21.34 14.84 -0.79 3970 230 Defining
KMBL KAMBALDA, WA P 30/09/2013  12:32:31.35 6.11 4.64 4022 221 Non Defining
KLBR KELLERBERRIN, WA P 30/09/2013  12:32:49.36 6.19 -1.83 4346 224 Defining
MORW MORAWA, WA P 30/09/2013  12:32:53.37 5.62 4.06 4327 229 Non Defining
CASY CASEY, ANTARCTICA P 30/09/2013  12:36:13.57 6.30 0.49 7394 196 Defining

Data and seismograms

This site is under re-development. In the interim, data from Geoscience Australia's Seismograph Network can be accessed from the IRIS Data Management Centre.

Follow this link to view. Alternatively, follow this link to download the data from the IRIS SEEDlink server.

Important: Read about the limitations of this data.
Data retrieved: 08/12/2016 @ 16:12:24 (UTC)