Earthquake Details



Station map

The following map shows the location of the stations that detected this earthquake.
Note: This map may not include all non-Geoscience Australia stations. Check the phase arrivals list below for all information


Phase arrivals

The following table lists the phase arrivals associated with this earthquake.

Station ID Station Name Phase Arrival (UTC) Signal to Noise Ratio Residual(s) Distance (km) Azimuth (°) Use of Phases
KDU KAKADU, NT P 09/11/2013  00:25:15.71 4.58 0.65 2372 194 Defining
MTN MANTON DAM DARWIN NT P 09/11/2013  00:25:37.73 5.82 0.29 2428 197 Defining
COEN COEN, QLD P 09/11/2013  00:25:46.74 8.12 1.31 2525 166 Defining
KNRA KUNUNURRA, WA P 09/11/2013  00:26:09.76 10.54 0.02 2810 200 Defining
MTSU MOUNT SURPRISE, QLD P 09/11/2013  00:26:26.78 9.63 -0.72 3007 166 Defining
FITZ FITZROY CROSSING, WA P 09/11/2013  00:26:38.79 11.81 -0.98 3188 204 Defining
QIS MOUNT ISA, QLD P 09/11/2013  00:26:40.80 10.57 0.54 3189 176 Defining
PSA00 PILBARA SEISMIC ARRAY ELEMENT 00, WA P 09/11/2013  00:27:28.84 4.14 -1.23 3819 210 Defining
WRKA WARAKURNA, WA P 09/11/2013  00:27:28.84 29.05 -0.78 3814 195 Defining
OOD OODNADATTA, SA P 09/11/2013  00:27:42.86 6.40 -0.62 3992 183 Defining
INKA INNAMINCKA, SA P 09/11/2013  00:27:46.86 4.19 -0.46 3996 175 Defining
RMQ ROMA, QLD P 09/11/2013  00:27:50.87 5.76 -0.61 4029 163 Defining
FORT FORREST, WA P 09/11/2013  00:28:16.89 19.57 -0.35 4436 193 Defining
STKA STEPHENS CREEK, NSW P 09/11/2013  00:28:18.89 9.82 -0.29 4462 175 Defining
CMSA COBAR, NSW P 09/11/2013  00:28:22.90 15.01 1.29 4489 169 Defining
BBOO BUCKLEBOO, SA P 09/11/2013  00:28:24.90 8.94 -0.26 4548 182 Defining
ARMA ARMIDALE, NSW P 09/11/2013  00:28:26.90 7.24 1.60 4536 161 Defining
HTT HALLETT, SA P 09/11/2013  00:28:30.91 4.77 0.06 4617 178 Defining
RKGY ROCKY GULLY, WA P 09/11/2013  00:29:14.95 5.23 0.73 5216 203 Defining
SBA SCOTT BASE, ANTARCTICA P 09/11/2013  00:33:32.21 4.06 1.70 9729 174 Defining
MAW MAWSON, ANTARCTICA P 09/11/2013  00:33:51.23 8.88 0.47 10206 202 Defining

Data and seismograms

This site is under re-development. In the interim, data from Geoscience Australia's Seismograph Network can be accessed from the IRIS Data Management Centre.

Follow this link to view. Alternatively, follow this link to download the data from the IRIS SEEDlink server.

Important: Read about the limitations of this data.
Data retrieved: 21/10/2017 @ 14:07:56 (UTC)