Earthquake Details



Station map

The following map shows the location of the stations that detected this earthquake.
Note: This map may not include all non-Geoscience Australia stations. Check the phase arrivals list below for all information


Phase arrivals

The following table lists the phase arrivals associated with this earthquake.

Station ID Station Name Phase Arrival (UTC) Signal to Noise Ratio Residual(s) Distance (km) Azimuth (°) Use of Phases
MLBS SCIENCEWORKS, SPOTSWOOD, VIC P 13/01/2014  04:58:54.13 -1.00 -0.24 41 259 Defining
TOO TOOLANGI, VIC P 13/01/2014  04:58:55.13 695.09 1.63 24 30 Defining
- - S 13/01/2014  04:58:59.13 -1.00 -0.00 24 30 Defining
GVL GREENVALE RESERVOIR, VIC P 13/01/2014  04:58:56.13 -1.00 -0.40 43 291 Defining
GEXS DEAKIN UNI WAURN PONDS CAMPUS, GEELONG, VIC P 13/01/2014  04:59:06.14 -1.00 0.10 105 242 Defining
BRAT BALLARAT, VIC P 13/01/2014  04:59:09.14 -1.00 0.21 127 280 Defining
- - S 13/01/2014  04:59:25.16 -1.00 -0.43 127 280 Defining
ARPS MT ARAPILES, VIC P 13/01/2014  04:59:36.17 12.95 1.72 330 288 Defining
- - S 13/01/2014  05:00:13.21 -1.00 -0.02 330 288 Defining
MILA MILA, NSW P 13/01/2014  04:59:41.18 5.40 -0.40 345 78 Defining
- - S 13/01/2014  05:00:20.22 -1.00 0.29 345 78 Defining
GLAD GLADSTONE JUMP, TAS P 13/01/2014  04:59:45.18 -1.00 -0.28 425 148 Defining
CAN MOUNT STROMLO, CANBERRA, ACT P 13/01/2014  04:59:46.18 -1.00 0.16 424 51 Defining
- - S 13/01/2014  05:00:42.24 -1.00 0.19 424 51 Defining
CNB KOWEN FOREST, ACT P 13/01/2014  04:59:51.19 -1.00 -0.10 450 54 Defining
- - S 13/01/2014  05:00:48.24 -1.00 -0.44 450 54 Defining
YNG YOUNG, NSW P 13/01/2014  04:59:53.19 -1.00 -0.11 473 36 Defining
- - S 13/01/2014  05:00:42.24 -1.00 -0.03 473 36 Defining
MOO MOORLANDS, TAS P 13/01/2014  05:00:01.20 4.28 -0.46 544 164 Defining
CMSA COBAR, NSW P 13/01/2014  05:00:20.22 -1.00 0.52 693 3 Defining
- - S 13/01/2014  05:01:30.29 -1.00 -1.00 693 3 Defining
HTT HALLETT, SA P 13/01/2014  05:00:28.22 -1.00 1.56 755 308 Defining

Data and seismograms

This site is under re-development. In the interim, data from Geoscience Australia's Seismograph Network can be accessed from the IRIS Data Management Centre.

Follow this link to view. Alternatively, follow this link to download the data from the IRIS SEEDlink server.

Important: Read about the limitations of this data.
Data retrieved: 05/12/2016 @ 14:40:14 (UTC)