ANNOTATION CLASS IDENTIFER (ANNOTATIONCLASSID) [Integer;Yes;0;10;0;Pop_Aut] This is the Annotation Class Identifier which is used to define annotation subtypes.

The following annotation classes exist in AdministrationAnno;
Arial12ptCenter
Arial14ptCenter
Arial18ptCenter
Arial5ptCenter
Arial5ptLeft
Arial6ptCenter
Arial7ptCenter
Arial9ptCenter
ArialNarrow8ptCenter
ArialNarrow6ptItalicCenter
ArialNarrow6ptItalicLeft
ArialNarrow6ptItalicRight

FEATURE (FEATURE) [String;Yes;32;0;0;Pop_Req] The code which identifies the class of topographic feature represented by the annotation. This field must be a legitimate feature class name.

Acceptable Domain Entries from dm_AdministrationFCs;
AdministrationAreas
InternationalBoundaries

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;5;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

GLOBAL IDENTIFIER (GlobalID) [Global ID;Yes;Pop_Aut] A unique system generated Global Identifier. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

General - All Scales

No feature type field exists for this annotation feature class. The feature type has only been included throughout the specification documentation for ease of reference.

Only Annotation associated with, or derived from, entities in feature classes grouped within the Administration feature dataset should exist within the AdministrationAnno feature class.

Wherever possible annotation should be stored using the subclasses indicated under AnnotationClassID. Annotation stored as inline text should be kept to a minimum.

Administration Annotation will only be constructed for the following feature classes:
Defence And Prohibited, Forestry Reserve, Indigenous Land, Nature Conservation Reserve, Water Supply Reserve.

Type for large polygons and long linear features may be held in an annotation feature for each word to allow for spacing and differences in orientation, see Section 2 chapter 4.

Annotation should not contain any HTML tags within the blob element, nor should it contain any special characters.

Editing and placement of Annotation should be conducted in the appropriate MGA 1994 zone to ensure the spatial position of type on the map face can be correctly represented.

Annotation should only occur where the associated feature either has a sufficient dimension size or Upperscale value to be shown at 1:100 000 scale or a smaller scale/larger extent (eg 1:250 000, 1:1 000 000)

General - All Scales

Administration Anno, wherever possible, should avoid overlapping the graticule.

Defence And Prohibited, Forestry Reserve, Indigenous Land, Nature Conservation Reserve, Water Supply Reserve

Section 2 Chapter 5.7, 5.8, 9

NTMS 100K

ANNOTATION CLASS IDENTIFER (ANNOTATIONCLASSID) [Integer;Yes;0;10;0;Pop_Aut] This is the Annotation Class Identifier which is used to define annotation subtypes.

The following annotation classes exist in AdministrationAnno;
Arial12ptCenter
Arial14ptCenter
Arial18ptCenter
Arial24ptCenter
Arial5ptLeft
Arial6ptCenter
Arial7ptCenter
Arial9ptCenter
ArialNarrow5ptCenter
ArialNarrow5ptLeft
ArialNarrow6ptCenter
ArialNarrow6ptLeft
ArialNarrow6ptRight
ArialNarrow7ptCenter
ArialNarrow8ptCenter
ArialNarrow9ptCenter
ArialNarrow12ptCenter
ArialNarrow6ptItalicCenter
ArialNarrow6ptItalicLeft
ArialNarrow6ptItalicRight

FEATURE (FEATURE) [String;Yes;32;0;0;Pop_Req] The code which identifies the class of topographic feature represented by the annotation. This field must be a legitimate feature class name.

Acceptable Domain Entries from dm_AdministrationFCs;
AdministrationAreas
InternationalBoundaries

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;5;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

GLOBAL IDENTIFIER (GlobalID) [Global ID;Yes;Pop_Aut] A unique system generated Global Identifier. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

General - All Scales

No feature type field exists for this annotation feature class. The feature type has only been included throughout the specification documentation for ease of reference.

Only Annotation associated with, or derived from, entities in feature classes grouped within the Administration feature dataset should exist within the AdministrationAnno feature class.

Wherever possible annotation should be stored using the subclasses indicated under AnnotationClassID. Annotation stored as inline text should be kept to a minimum.

Administration Annotation will only be constructed for the following feature classes:
Defence And Prohibited, Forestry Reserve, Indigenous Land, Nature Conservation Reserve, Water Supply Reserve.

Type for large polygons and long linear features may be held in an annotation feature for each word to allow for spacing and differences in orientation, see Section 2 chapter 4.

Annotation should not contain any HTML tags within the blob element, nor should it contain any special characters.

Editing and placement of Annotation should be conducted in the appropriate MGA 1994 zone to ensure the spatial position of type on the map face can be correctly represented.

Annotation should only occur where the associated feature either has a sufficient dimension size or Upperscale value to be shown at 1:250 000 scale or a smaller scale/larger extent (eg 1:1 000 000,1:5 000 000 )

General - All Scales

Administration Anno, wherever possible, should avoid overlapping the graticule.

Defence And Prohibited, Forestry Reserve, Indigenous Land, Nature Conservation Reserve, Water Supply Reserve

Section 2 Chapter 5.7, 5.8, 10

NTMS 100K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Defence And Prohibited

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature.

1

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

DefenceAndProhibited

ADMINISTRATION NAME (ADMINNAME) [String;Yes;100;0;0;Pop_Wk] The official (gazetted) name of the Administration Area (or if an official name is unknown, the common name used to designate this area).

The name of the Defence and/or Prohibited Land (see Geodatabase Rules for population requirements.)

AMINISTRATION ID (ADMINID) [Integer;Yes;0;8;0;Pop_Aut] The Administration Area Identifier used to link the original source data to the converted data.

AGENCY PERSISTENT IDENTIFIER (AGENCYPID) [String;Yes;10;0;0;Pop_Wk] The source agency's persistent identifier;

CONTROLLING AUTHORITY (AUTHORITY) [String;Yes;100;0;0;Pop_Req] Name of controlling authority.

CLASSIFICATION (CLASS) [String;Yes(No);40;0;0;Pop_Req] The entities classification or status;

Acceptable Domain Entries from dm_Access;
Defence Land Prohibited
Defence Land Restricted
Non Defence Prohibited

CURRENCY (CURRENCY) [Date;Yes;36;0;0;Pop_Wk] Date data was received or confirmed to be correct as per available information at the time.

FEATURE AREA (FEATAREA) [Double;Yes;0;38;8;Pop_Wk] The declared area of the reserve, as opposed to a machine calculated area, recorded to the nearest hectare.

IUCN CODING SYSTEM (IUCN) [String;Yes;4;0;0;Pop_Wk] Internationally defined set of management (World Conservation Union) categories.

LATEST GAZETTEER ENTRY (LATEST_GAZ) [Date;Yes;36;0;0;Pop_Wk] The date of the most recent gazetted amendment or verification by the relevant state authority.

PROCLAIMED DATE (PROCLAIMED) [Date;Yes;36;0;0;Pop_Wk] The Gazettal date of the original proclamation of the Administration Area.

PROVIDER (PROVIDER) [String;Yes;100;0;0;Pop_Req] The provider of the data spatial/attribute representation.

STATE/TERRITORY (STATE) [String;Yes(No);30;0;0;Pop_Req] Australian/Foreign State or Territory identifier code;

Acceptable Domain Entries from dm_IslandState;
AUSTRALIAN CAPITAL TERRITORY
EAST TIMOR
INDONESIA
JERVIS BAY TERRITORY
NEW SOUTH WALES
NORTHERN TERRITORY
NOT APPLICABLE
PAPUA NEW GUINEA
QUEENSLAND
SOUTH AUSTRALIA
TASMANIA
VICTORIA
WESTERN AUSTRALIA

METADATA COMMENTS (METADATACOMMENT) [String;Yes;1000;0;0;Pop_Dep] Comments expanding on the issues related to data capture, representation or sources.

RESTRICTIONS ON USE (RESTRICTIONS) [String;Yes;50;0;0;Pop_Req] Specific restrictions for data usage as defined by licence agreements, land owners, agreements with other agencies supplying the data.

Acceptable Domain Entries from dm_Restrictions;
Australian Federal Govt Only
Australian Federal Govt plus NMI Map Products
Geoscience Australia Only
Geoscience Australia plus NMI Map Products
NMI Only
NMI Only plus NMI Map Products
NMI Use for 3rd Party
NMI Use for 3rd Party plus NMI Map Products
Public Access
Whole of Govt Only
Whole of Govt plus NMI Map Products

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

STAKEHOLDERID (STKEHDRID) [String;Yes;250;0;0;Pop_Wk] This is the id used by GA stakeholders or collaborators to identify the link between data maintained, captured or held by GA and their own datasets.

STAKEHOLDER NAME RELATED TO ID ENTRY (STKEHDRNAME) [String;Yes;250;0;0;Pop_Wk] This is the name of stakeholders or collaborators from whom the stakeholderid has been derived and data link is maintained.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

Acceptable Domain Entries from dm_UpperScale;
0
25000
50000
100000
250000

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;25;0;0;Pop_Dep] Classification of upper scale certainty;

Acceptable Domain Entries from dm_USCertainty;
Automatically Assigned
Definite
Indefinite
Undefined

DIMENSION (DIMENSION) [Double;Yes;0;15;0;Pop_Dep] This is the dimension of the linear feature in metres or the polygon feature in square metres as measured in the MGA94 projection of the appropriate zone. This field will be populated internally by Geoscience Australia and should not be altered in any form by producers.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;5;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

GLOBAL IDENTIFIER (GlobalID) [Global ID;Yes;Pop_Aut] A unique system generated Global Identifier. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

General - All Scales

All 'Defence and Prohibited' areas obtained from designated Authoritative Providers will be included within the database regardless of size. Where a 'Defence and Prohibited' area is represented on the previous edition map (and there is supporting evidence for its continued existence) the producer should seek clarification from Geoscience Australia on how and/or if these features should be captured in the revised database.

The Authority classification for prohibited areas should not be populated with a value of 'Not Applicable'. All prohibited areas obtained from miscellaneous sources (e.g. previous edition map or special instruction) whose authority is not known should have an authority classification of 'Other (not specified)'.

'Defence and Prohibited' areas will be named if names are included in the supplied material. The only exception to this is where populating the name would provide sensitive information in which case the name should be held in the metadata comment field and the name field should remain unpopulated.

The attribution of the Classification field will be based upon advice provided by Geoscience Australia when not provided as part of the supplied material.

Where the Defence and Prohibited Area is identified by a number only, the name field will populated with the type of reserve (e.g. Quarantine Area) and the number will not be translated from the database supplied by the designated Authoritative providers.

The UPPERSCALE value will be applied based on a 'Defence And Prohibited' area meeting the minimum size for data capture/map representation. Where a named 'Defence And Prohibited' is broken up into a number of areas with the identical attributes of 'NAME' and 'AUTHORITY', then all the component areas should be assigned the 'UPPERSCALE' value based on the total area of the sum of the component parts.

General - All Scales

Defence and Prohibited areas can only overlap the following features in the Administration Feature Dataset:
Nature Conservation Reserves.

When the dimension is equal to or greater than 500 000 for:
-a specific Administration Area, or
-a set of named reserve areas which have identical attribute combinations using the FEATURE TYPE, NAME and AUTHORITY fields,
the following paragraph will apply:

Where the edge of a Administration Area polygon has a similar shape to another Administration Area feature (of the following feature types: Defence And Prohibited, Forestry Reserve, Indigenous Land, Nature Conservation Reserve, Water Supply Reserve), and is within 50 metres of the feature, then the relevant section of polygon edge for the Administration Area will be coincident with this other feature. Where both features are of similar shape but the distance separating them is greater than 50 metres the relevant section of polygon edge for the Administration Area will be made coincident with the feature if it appears the relevant section of polygon edge for the Administration Area should be following the feature. These rules will not apply where two reserves are separated by a road reserve. In such cases the separation between the two boundaries will be maintained.

General - All Scales

When the dimension is equal to or greater than 500 000 for:
-a specific Administration Area, or
-a set of named reserve areas which have identical attribute combinations using the FEATURE TYPE, NAME and AUTHORITY fields,
the following rules will apply:

Where the edge of a Administration Area (of the following feature types: Defence And Prohibited, Forestry Reserve, Indigenous Land, Nature Conservation Reserve, Water Supply Reserve) has a similar shape to a feature listed below, it must be coincident with that feature if the feature meets the minimum size criteria for 1:100 000 or 1:250 000 and:
- the edge of the Administration Area falls within 50 metres of the feature, or
- the edge of the Administration Area appears that it should follow the feature.

Aerial Cableway
Canal Line
Cleared Line
Conveyor
Dam Wall
Discontinuities
Fence
Foot Track
InternationalBoundary
Railway
Road
Sea Wall
Shoreline
State Border
Pipelines (feature class)
PowerlineTransmissionNetwork
Watercourse
AircraftFacilityAreas (feature class (polygon edge))
Builtup Area (feature type (polygon edge))
Canal Area (feature type (polygon edge)
Cemetery Area (feature type (polygon edge))
Crater (feature type (polygon edge))
Deformation Areas (feature class (polygon edge))
Flats (feature class (polygon edge))
Lake (feature type (polygon edge))
Landmark Area (feature type (polygon edge))
Mine Area (feature type (polygon edge ))
Pondage Areas (feature class (polygon edge))
Recreation Area (feature type (polygon edge))
Reservoirs (feature class (polygon edge))
Waste Management Area (feature type (polygon edge))
Watercourse Area (feature type (polygon edge))

The above rules will not apply where two reserves are separated by a road reserve. In such cases the separation between the two boundaries will be maintained.

General - All Scales

Defence And Prohibited Areas will be named where named in the database. Where the reserve is identified by a number only, the Defence And Prohibited Areas will be labelled with the type of reserve (e.g. Quarantine Area) and the number will not be shown.


Defence And Prohibited areas with the classification of "Defence Land Prohibited" or "Non-Defence Prohibited" should have an accompanying note 'prohibited area' unless the words 'prohibited area' are included in the name.
Defence And Prohibited areas with the classification of "Defence Land Restricted" should have an accompanying note 'restricted area' unless the words 'restricted area' are included in the name.
Type style for this note will be that specified for 'notes for areas restricted access' Section 2 chapter 7.1 and 8.1. Where the reserve is identified by a number, only the reserve type will be shown.

Only 'Defence And Prohibited' areas which have an Upperscale equal to or greater than the applicable map scale of the product being produced will be represented on the map face. (eg For a 'Defence And Prohibited' area to be represented on a 1:100 000 product it must have an Upperscale value of '100000' or '250000')

Section 2 Chapter 5.8
Section 3 Chapters 5.16, 5.17, 5.18, 5.20

NTMS 100K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Fisheries Jurisdiction Boundary

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature.

9

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

FisheriesJurisdictionBoundary

COUNTRY NAME 1 (COUNTRYNAME1) [String;Yes;60;0;0;Pop_Dep] The name of the country on one side of an international boundary.

COUNTRY NAME 2 (COUNTRYNAME2) [String;Yes;60;0;0;Pop_Dep] The name of the country on one side of an international boundary not designated by the Country name 1 field.

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digital data for initial capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6) ; Most Recent Reliability Date of Revision Source Material (or Base Material/digital data for initial capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. (See Section 1 Chapter 3.7 Positional Accuracy for more information);

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

This field is not applicable to this subtype and therefore is currently not to be populated;

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;25;0;0;Pop_Dep] Classification of upper scale certainty;

This field is not applicable to this subtype and therefore is currently not to be populated;

TEXT NOTE (TEXTNOTE) [String;Yes;50;0;0;Pop_Dep] Descriptive note to appear on map. Text Note field should be added when directed in the Geodatabase Rules or if descriptive information is known about a feature that is not covered by any other item in the feature class and expands on the definition of the feature.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;5;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 1 000 000 PRODUCTS (SYMBOLWAC1Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 2 500 000 PRODUCTS (SYMBOL2_5Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 5 000 000 PRODUCTS (SYMBOL5Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 10 000 000 PRODUCTS (SYMBOL10Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

GLOBAL IDENTIFIER (GlobalID) [Global ID;Yes;Pop_Aut] A unique system generated Global Identifier. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

General - All Scales

Fisheries Jurisdication Boundary should be defined and redefined as per information supplied by Geoscience Australia's 'Law of the Sea and Maritime Boundary Advice Project'.

All International boundaries will be shown.

General - All Scales

The names of the Countries will be shown on the relevant side of the boundary as CartographyAnno.

General - All Scales

The names of the Countries will be shown on the relevant side of the boundary as CartographyAnno.

State Border, Cartography Anno 100K, Cartography Anno 250K, Cartography Anno WAC, Cartography Anno 2_5MIL, Cartography Anno 5MIL, Cartography Anno 10MIL

GEODATA TOPO250K, NTMS 100K, NTMS 250K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Forestry Reserve

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature.

2

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

ForestryReserve

ADMINISTRATION NAME (ADMINNAME) [String;Yes;100;0;0;Pop_Wk] The official (gazetted) name of the Administration Area (or if an official name is unknown, the common name used to designate this area).

The name of the Forestry Reserve (see Geodatabase Rules for population requirements.)

AMINISTRATION ID (ADMINID) [Integer;Yes;0;8;0;Pop_Aut] The Administration Area Identifier used to link the original source data to the converted data.

AGENCY PERSISTENT IDENTIFIER (AGENCYPID) [String;Yes;10;0;0;Pop_Wk] The source agency's persistent identifier;

CONTROLLING AUTHORITY (AUTHORITY) [String;Yes;100;0;0;Pop_Req] Name of controlling authority.

CLASSIFICATION (CLASS) [String;Yes(No);40;0;0;Pop_Req] The entities classification or status;

This field is not applicable to this subtype and therefore is currently not to be populated;

CURRENCY (CURRENCY) [Date;Yes;36;0;0;Pop_Wk] Date data was received or confirmed to be correct as per available information at the time.

FEATURE AREA (FEATAREA) [Double;Yes;0;38;8;Pop_Wk] The declared area of the reserve, as opposed to a machine calculated area, recorded to the nearest hectare.

IUCN CODING SYSTEM (IUCN) [String;Yes;4;0;0;Pop_Wk] Internationally defined set of management (World Conservation Union) categories.

LATEST GAZETTEER ENTRY (LATEST_GAZ) [Date;Yes;36;0;0;Pop_Wk] The date of the most recent gazetted amendment or verification by the relevant state authority.

PROCLAIMED DATE (PROCLAIMED) [Date;Yes;36;0;0;Pop_Wk] The Gazettal date of the original proclamation of the Administration Area.

PROVIDER (PROVIDER) [String;Yes;100;0;0;Pop_Req] The provider of the data spatial/attribute representation.

STATE/TERRITORY (STATE) [String;Yes(No);30;0;0;Pop_Req] Australian/Foreign State or Territory identifier code;

Acceptable Domain Entries from dm_IslandState;
AUSTRALIAN CAPITAL TERRITORY
EAST TIMOR
INDONESIA
JERVIS BAY TERRITORY
NEW SOUTH WALES
NORTHERN TERRITORY
NOT APPLICABLE
PAPUA NEW GUINEA
QUEENSLAND
SOUTH AUSTRALIA
TASMANIA
VICTORIA
WESTERN AUSTRALIA

METADATA COMMENTS (METADATACOMMENT) [String;Yes;1000;0;0;Pop_Dep] Comments expanding on the issues related to data capture, representation or sources.

RESTRICTIONS ON USE (RESTRICTIONS) [String;Yes;50;0;0;Pop_Req] Specific restrictions for data usage as defined by licence agreements, land owners, agreements with other agencies supplying the data.

Acceptable Domain Entries from dm_Restrictions;
Australian Federal Govt Only
Australian Federal Govt plus NMI Map Products
Geoscience Australia Only
Geoscience Australia plus NMI Map Products
NMI Only
NMI Only plus NMI Map Products
NMI Use for 3rd Party
NMI Use for 3rd Party plus NMI Map Products
Public Access
Whole of Govt Only
Whole of Govt plus NMI Map Products

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

STAKEHOLDERID (STKEHDRID) [String;Yes;250;0;0;Pop_Wk] This is the id used by GA stakeholders or collaborators to identify the link between data maintained, captured or held by GA and their own datasets.

STAKEHOLDER NAME RELATED TO ID ENTRY (STKEHDRNAME) [String;Yes;250;0;0;Pop_Wk] This is the name of stakeholders or collaborators from whom the stakeholderid has been derived and data link is maintained.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

Acceptable Domain Entries from dm_UpperScale;
0
25000
50000
100000
250000

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;25;0;0;Pop_Dep] Classification of upper scale certainty;

Acceptable Domain Entries from dm_USCertainty;
Automatically Assigned
Definite
Indefinite
Undefined

DIMENSION (DIMENSION) [Double;Yes;0;15;0;Pop_Dep] This is the dimension of the linear feature in metres or the polygon feature in square metres as measured in the MGA94 projection of the appropriate zone. This field will be populated internally by Geoscience Australia and should not be altered in any form by producers.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;5;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

GLOBAL IDENTIFIER (GlobalID) [Global ID;Yes;Pop_Aut] A unique system generated Global Identifier. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

General - All Scales

All Forestry Reserves obtained from designated Authoritative Providers will be included within the database regardless of size.

The Authority classification for reserve areas should not be populated with 'Not Applicable'. All reserves whose authority is not known, should have a authority value of 'Other (not specified)'.

Forestry Reserve features will be named where named in the databases supplied by the designated Authoritative Providers. The exception is State Forests within Victoria, where these will be attributed with a generic name of 'STATE FOREST' only. Where the Forestry Reserve is identified by a number only, the name field will populated with the type of reserve (e.g. Timber Reserve) and the number will not be translated from the database supplied by the designated Authoritative providers.

The UPPERSCALE value will be applied based on a 'Forestry Reserve' meeting the minimum size for data capture/map representation. Where a named Forestry Reserve is broken up into a number of areas with the identical attributes of 'NAME' and 'AUTHORITY', then all the component areas should be assigned the 'UPPERSCALE' value based on the total area of the sum of the component parts.

General - All Scales

Forestry Reserves can only overlap the following features in the Administration Feature Dataset:
Water Supply Reserves.

When the dimension is equal to or greater than 500 000 for:
-a specific Administration Area, or
-a set of named reserve areas which have identical attribute combinations using the FEATURE TYPE, NAME and AUTHORITY fields,
the following paragraph will apply:

Where the edge of a Administration Area polygon has a similar shape to another Administration Area feature (of the following feature types: Defence And Prohibited, Forestry Reserve, Indigenous Land, Nature Conservation Reserve, Water Supply Reserve), and is within 50 metres of the feature, then the relevant section of polygon edge for the Administration Area will be coincident with this other feature. Where both features are of similar shape but the distance separating them is greater than 50 metres the relevant section of polygon edge for the Administration Area will be made coincident with the feature if it appears the relevant section of polygon edge for the Administration Area should be following the feature. These rules will not apply where two reserves are separated by a road reserve. In such cases the separation between the two boundaries will be maintained.

General - All Scales

When the dimension is equal to or greater than 500 000 for:
-a specific Administration Area, or
-a set of named reserve areas which have identical attribute combinations using the FEATURE TYPE, NAME and AUTHORITY fields,
the following rules will apply:

Where the edge of a Administration Area (of the following feature types: Defence And Prohibited, Forestry Reserve, Indigenous Land, Nature Conservation Reserve, Water Supply Reserve) has a similar shape to a feature listed below, it must be coincident with that feature if the feature meets the minimum size criteria for 1:100 000 or 1:250 000 and:
- the edge of the Administration Area falls within 50 metres of the feature, or
- the edge of the Administration Area appears that it should follow the feature.

Aerial Cableway
Canal Line
Cleared Line
Conveyor
Dam Wall
Discontinuities
Fence
Foot Track
InternationalBoundary
Railway
Road
Sea Wall
Shoreline
State Border
Pipelines (feature class)
PowerlineTransmissionNetwork
Watercourse
AircraftFacilityAreas (feature class (polygon edge))
Builtup Area (feature type (polygon edge))
Canal Area (feature type (polygon edge)
Cemetery Area (feature type (polygon edge))
Crater (feature type (polygon edge))
Deformation Areas (feature class (polygon edge))
Flats (feature class (polygon edge))
Lake (feature type (polygon edge))
Landmark Area (feature type (polygon edge))
Mine Area (feature type (polygon edge ))
Pondage Areas (feature class (polygon edge))
Recreation Area (feature type (polygon edge))
Reservoirs (feature class (polygon edge))
Waste Management Area (feature type (polygon edge))
Watercourse Area (feature type (polygon edge))

The above rules will not apply where two reserves are separated by a road reserve. In such cases the separation between the two boundaries will be maintained.

General - All Scales

Forestry Reserves will be named where named in the database.Where the Forestry Reserve is identified by a number only, the Forestry Reserve will be labelled with the type of reserve (e.g. Timber Reserve) and the number will not be shown.

Only 'Forestry Reserves' areas which have an Upperscale equal to or greater than the applicable map scale of the product being produced will be represented on the map face.(eg For a 'Forestry Reserves' area to be represented on a 1:100 000 product it must have an Upperscale value of '100000' or '250000')

Section 2 Chapter 5.8
Section 3 Chapters 5.16, 5.17, 5.18, 5.20

NTMS 100K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Indigenous Land

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature.

3

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

IndigenousLand

ADMINISTRATION NAME (ADMINNAME) [String;Yes;100;0;0;Pop_Wk] The official (gazetted) name of the Administration Area (or if an official name is unknown, the common name used to designate this area).

The name of the Indigenous Land (see Geodatabase Rules for population requirements.)

AMINISTRATION ID (ADMINID) [Integer;Yes;0;8;0;Pop_Aut] The Administration Area Identifier used to link the original source data to the converted data.

AGENCY PERSISTENT IDENTIFIER (AGENCYPID) [String;Yes;10;0;0;Pop_Wk] The source agency's persistent identifier;

CONTROLLING AUTHORITY (AUTHORITY) [String;Yes;100;0;0;Pop_Req] Name of controlling authority.

CLASSIFICATION (CLASS) [String;Yes(No);40;0;0;Pop_Req] The entities classification or status;

This field is not applicable to this subtype and therefore is currently not to be populated;

CURRENCY (CURRENCY) [Date;Yes;36;0;0;Pop_Wk] Date data was received or confirmed to be correct as per available information at the time.

FEATURE AREA (FEATAREA) [Double;Yes;0;38;8;Pop_Wk] The declared area of the reserve, as opposed to a machine calculated area, recorded to the nearest hectare.

IUCN CODING SYSTEM (IUCN) [String;Yes;4;0;0;Pop_Wk] Internationally defined set of management (World Conservation Union) categories.

LATEST GAZETTEER ENTRY (LATEST_GAZ) [Date;Yes;36;0;0;Pop_Wk] The date of the most recent gazetted amendment or verification by the relevant state authority.

PROCLAIMED DATE (PROCLAIMED) [Date;Yes;36;0;0;Pop_Wk] The Gazettal date of the original proclamation of the Administration Area.

PROVIDER (PROVIDER) [String;Yes;100;0;0;Pop_Req] The provider of the data spatial/attribute representation.

STATE/TERRITORY (STATE) [String;Yes(No);30;0;0;Pop_Req] Australian/Foreign State or Territory identifier code;

Acceptable Domain Entries from dm_IslandState;
AUSTRALIAN CAPITAL TERRITORY
EAST TIMOR
INDONESIA
JERVIS BAY TERRITORY
NEW SOUTH WALES
NORTHERN TERRITORY
NOT APPLICABLE
PAPUA NEW GUINEA
QUEENSLAND
SOUTH AUSTRALIA
TASMANIA
VICTORIA
WESTERN AUSTRALIA

METADATA COMMENTS (METADATACOMMENT) [String;Yes;1000;0;0;Pop_Dep] Comments expanding on the issues related to data capture, representation or sources.

RESTRICTIONS ON USE (RESTRICTIONS) [String;Yes;50;0;0;Pop_Req] Specific restrictions for data usage as defined by licence agreements, land owners, agreements with other agencies supplying the data.

Acceptable Domain Entries from dm_Restrictions;
Australian Federal Govt Only
Australian Federal Govt plus NMI Map Products
Geoscience Australia Only
Geoscience Australia plus NMI Map Products
NMI Only
NMI Only plus NMI Map Products
NMI Use for 3rd Party
NMI Use for 3rd Party plus NMI Map Products
Public Access
Whole of Govt Only
Whole of Govt plus NMI Map Products

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

STAKEHOLDERID (STKEHDRID) [String;Yes;250;0;0;Pop_Wk] This is the id used by GA stakeholders or collaborators to identify the link between data maintained, captured or held by GA and their own datasets.

STAKEHOLDER NAME RELATED TO ID ENTRY (STKEHDRNAME) [String;Yes;250;0;0;Pop_Wk] This is the name of stakeholders or collaborators from whom the stakeholderid has been derived and data link is maintained.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

Acceptable Domain Entries from dm_UpperScale;
0
25000
50000
100000
250000

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;25;0;0;Pop_Dep] Classification of upper scale certainty;

Acceptable Domain Entries from dm_USCertainty;
Automatically Assigned
Definite
Indefinite
Undefined

DIMENSION (DIMENSION) [Double;Yes;0;15;0;Pop_Dep] This is the dimension of the linear feature in metres or the polygon feature in square metres as measured in the MGA94 projection of the appropriate zone. This field will be populated internally by Geoscience Australia and should not be altered in any form by producers.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;5;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

GLOBAL IDENTIFIER (GlobalID) [Global ID;Yes;Pop_Aut] A unique system generated Global Identifier. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

General - All Scales

All 'Indigenous Land' areas obtained from designated Authoritative Providers will be included within the database regardless of size.

The Authority classification for reserve areas should not be populated with 'Not Applicable'. All reserves whose authority is not known, should have a authority value of 'Other (not specified)'.

Indigenous sacred sites will not be named as sacred sites on the map even if named on a previous edition map, but the feature may be a lake, pool or waterhole in which case the appropriate map symbol and hydrological name will be used.

Indigenous Lands will be named.

The UPPERSCALE value will be applied based on a 'Indigenous Lands' meeting the minimum size for data capture/map representation. Where a named 'Indigenous Lands' is broken up into a number of areas with the identical attributes of 'NAME' and 'AUTHORITY', then all the component areas should be assigned the 'UPPERSCALE' value based on the total area of the sum of the component parts.

General - All Scales

Indigenous Land cannot overlap other polygons in the Reserves Feature Class ie. Two differing reserve types cannot share a common polygon area.

When the dimension is equal to or greater than 500 000 for:
-a specific Administration Area, or
-a set of named reserve areas which have identical attribute combinations using the FEATURE TYPE, NAME and AUTHORITY fields,
the following paragraph will apply:

Where the edge of a Administration Area polygon has a similar shape to another Administration Area feature (of the following feature types: Defence And Prohibited, Forestry Reserve, Indigenous Land, Nature Conservation Reserve, Water Supply Reserve), and is within 50 metres of the feature, then the relevant section of polygon edge for the Administration Area will be coincident with this other feature. Where both features are of similar shape but the distance separating them is greater than 50 metres the relevant section of polygon edge for the Administration Area will be made coincident with the feature if it appears the relevant section of polygon edge for the Administration Area should be following the feature. These rules will not apply where two reserves are separated by a road reserve. In such cases the separation between the two boundaries will be maintained.

General - All Scales

When the dimension is equal to or greater than 500 000 for:
-a specific Administration Area, or
-a set of named reserve areas which have identical attribute combinations using the FEATURE TYPE, NAME and AUTHORITY fields,
the following rules will apply:

Where the edge of a Administration Area (of the following feature types: Defence And Prohibited, Forestry Reserve, Indigenous Land, Nature Conservation Reserve, Water Supply Reserve) has a similar shape to a feature listed below, it must be coincident with that feature if the feature meets the minimum size criteria for 1:100 000 or 1:250 000 and:
- the edge of the Administration Area falls within 50 metres of the feature, or
- the edge of the Administration Area appears that it should follow the feature.

Aerial Cableway
Canal Line
Cleared Line
Conveyor
Dam Wall
Discontinuities
Fence
Foot Track
InternationalBoundary
Railway
Road
Sea Wall
Shoreline
State Border
Pipelines (feature class)
PowerlineTransmissionNetwork
Watercourse
AircraftFacilityAreas (feature class (polygon edge))
Builtup Area (feature type (polygon edge))
Canal Area (feature type (polygon edge)
Cemetery Area (feature type (polygon edge))
Crater (feature type (polygon edge))
Deformation Areas (feature class (polygon edge))
Flats (feature class (polygon edge))
Lake (feature type (polygon edge))
Landmark Area (feature type (polygon edge))
Mine Area (feature type (polygon edge ))
Pondage Areas (feature class (polygon edge))
Recreation Area (feature type (polygon edge))
Reservoirs (feature class (polygon edge))
Waste Management Area (feature type (polygon edge))
Watercourse Area (feature type (polygon edge))

The above rules will not apply where two reserves are separated by a road reserve. In such cases the separation between the two boundaries will be maintained.

General - All Scales

Indigenous Lands will be named.

Only 'Indigenous Land' areas which have an Upperscale equal to or greater than the applicable map scale of the product being produced will be represented on the map face.(eg For a 'Indigenous Land' area to be represented on a 1:100 000 product it must have an Upperscale value of '100000' or '250000')

Section 2 Chapter 5.8
Section 3 Chapters 5.16, 5.17, 5.18, 5.20

NTMS 100K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

International Boundary General

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature.

8

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

InternationalBoundaryGeneral

COUNTRY NAME 1 (COUNTRYNAME1) [String;Yes;60;0;0;Pop_Dep] The name of the country on one side of an international boundary.

COUNTRY NAME 2 (COUNTRYNAME2) [String;Yes;60;0;0;Pop_Dep] The name of the country on one side of an international boundary not designated by the Country name 1 field.

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digital data for initial capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6) ; Most Recent Reliability Date of Revision Source Material (or Base Material/digital data for initial capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. (See Section 1 Chapter 3.7 Positional Accuracy for more information);

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

This field is not applicable to this subtype and therefore is currently not to be populated;

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;25;0;0;Pop_Dep] Classification of upper scale certainty;

This field is not applicable to this subtype and therefore is currently not to be populated;

TEXT NOTE (TEXTNOTE) [String;Yes;50;0;0;Pop_Dep] Descriptive note to appear on map. Text Note field should be added when directed in the Geodatabase Rules or if descriptive information is known about a feature that is not covered by any other item in the feature class and expands on the definition of the feature.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;5;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 1 000 000 PRODUCTS (SYMBOLWAC1Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 2 500 000 PRODUCTS (SYMBOL2_5Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 5 000 000 PRODUCTS (SYMBOL5Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 10 000 000 PRODUCTS (SYMBOL10Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

GLOBAL IDENTIFIER (GlobalID) [Global ID;Yes;Pop_Aut] A unique system generated Global Identifier. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

General - All Scales

International Boundary General should be defined and redefined as per information supplied by Geoscience Australia's 'Law of the Sea and Maritime Boundary Advice Project' or the Department of Foreign Affairs (if Land Based).

All International boundaries will be shown.

General - All Scales

The names of the Countries will be shown on the relevant side of the boundary as CartographyAnno.

General - All Scales

The names of the Countries will be shown on the relevant side of the boundary as CartographyAnno.

State Border, Cartography Anno 100K, Cartography Anno 250K, Cartography Anno WAC, Cartography Anno 2_5MIL, Cartography Anno 5MIL, Cartography Anno 10MIL

GEODATA TOPO250K, NTMS 100K, NTMS 250K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

International Boundary Land

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature.

11

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

InternationalBoundaryLand

COUNTRY NAME 1 (COUNTRYNAME1) [String;Yes;60;0;0;Pop_Dep] The name of the country on one side of an international boundary.

COUNTRY NAME 2 (COUNTRYNAME2) [String;Yes;60;0;0;Pop_Dep] The name of the country on one side of an international boundary not designated by the Country name 1 field.

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digital data for initial capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6) ; Most Recent Reliability Date of Revision Source Material (or Base Material/digital data for initial capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. (See Section 1 Chapter 3.7 Positional Accuracy for more information);

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

This field is not applicable to this subtype and therefore is currently not to be populated;

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;25;0;0;Pop_Dep] Classification of upper scale certainty;

This field is not applicable to this subtype and therefore is currently not to be populated;

TEXT NOTE (TEXTNOTE) [String;Yes;50;0;0;Pop_Dep] Descriptive note to appear on map. Text Note field should be added when directed in the Geodatabase Rules or if descriptive information is known about a feature that is not covered by any other item in the feature class and expands on the definition of the feature.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;5;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 1 000 000 PRODUCTS (SYMBOLWAC1Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 2 500 000 PRODUCTS (SYMBOL2_5Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 5 000 000 PRODUCTS (SYMBOL5Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 10 000 000 PRODUCTS (SYMBOL10Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

GLOBAL IDENTIFIER (GlobalID) [Global ID;Yes;Pop_Aut] A unique system generated Global Identifier. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

General - All Scales

International Boundary General should be defined and redefined as per information supplied by Geoscience Australia's 'Law of the Sea and Maritime Boundary Advice Project' or the Department of Foreign Affairs (if Land Based).

All International boundaries will be shown.

General - All Scales

The names of the Countries will be shown on the relevant side of the boundary as CartographyAnno.

General - All Scales

The names of the Countries will be shown on the relevant side of the boundary as CartographyAnno.

State Border, Cartography Anno 100K, Cartography Anno 250K, Cartography Anno WAC, Cartography Anno 2_5MIL, Cartography Anno 5MIL, Cartography Anno 10MIL

GEODATA TOPO250K, NTMS 100K, NTMS 250K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

International Boundary Water

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature.

10

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

InternationalBoundaryWater

COUNTRY NAME 1 (COUNTRYNAME1) [String;Yes;60;0;0;Pop_Dep] The name of the country on one side of an international boundary.

COUNTRY NAME 2 (COUNTRYNAME2) [String;Yes;60;0;0;Pop_Dep] The name of the country on one side of an international boundary not designated by the Country name 1 field.

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digital data for initial capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6) ; Most Recent Reliability Date of Revision Source Material (or Base Material/digital data for initial capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. (See Section 1 Chapter 3.7 Positional Accuracy for more information);

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

This field is not applicable to this subtype and therefore is currently not to be populated;

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;25;0;0;Pop_Dep] Classification of upper scale certainty;

This field is not applicable to this subtype and therefore is currently not to be populated;

TEXT NOTE (TEXTNOTE) [String;Yes;50;0;0;Pop_Dep] Descriptive note to appear on map. Text Note field should be added when directed in the Geodatabase Rules or if descriptive information is known about a feature that is not covered by any other item in the feature class and expands on the definition of the feature.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;5;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 1 000 000 PRODUCTS (SYMBOLWAC1Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 2 500 000 PRODUCTS (SYMBOL2_5Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 5 000 000 PRODUCTS (SYMBOL5Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 10 000 000 PRODUCTS (SYMBOL10Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

GLOBAL IDENTIFIER (GlobalID) [Global ID;Yes;Pop_Aut] A unique system generated Global Identifier. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

General - All Scales

International Boundary Water should be defined and redefined as per information supplied by Geoscience Australia's 'Law of the Sea and Maritime Boundary Advice Project'.

All International boundaries will be shown.

See also feature class 'State Border'.

General - All Scales

The names of the Countries will be shown on the relevant side of the boundary as CartographyAnno.

General - All Scales

The names of the Countries will be shown on the relevant side of the boundary as CartographyAnno.

State Border, Cartography Anno 100K, Cartography Anno 250K, Cartography Anno WAC, Cartography Anno 2_5MIL, Cartography Anno 5MIL, Cartography Anno 10MIL

GEODATA TOPO250K, NTMS 100K, NTMS 250K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Limit Of Territorial Sea

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature.

12

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

LimitOfTerritorialSea

COUNTRY NAME 1 (COUNTRYNAME1) [String;Yes;60;0;0;Pop_Dep] The name of the country on one side of an international boundary.

COUNTRY NAME 2 (COUNTRYNAME2) [String;Yes;60;0;0;Pop_Dep] The name of the country on one side of an international boundary not designated by the Country name 1 field.

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digital data for initial capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6) ; Most Recent Reliability Date of Revision Source Material (or Base Material/digital data for initial capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. (See Section 1 Chapter 3.7 Positional Accuracy for more information);

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

This field is not applicable to this subtype and therefore is currently not to be populated;

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;25;0;0;Pop_Dep] Classification of upper scale certainty;

This field is not applicable to this subtype and therefore is currently not to be populated;

TEXT NOTE (TEXTNOTE) [String;Yes;50;0;0;Pop_Dep] Descriptive note to appear on map. Text Note field should be added when directed in the Geodatabase Rules or if descriptive information is known about a feature that is not covered by any other item in the feature class and expands on the definition of the feature.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;5;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 1 000 000 PRODUCTS (SYMBOLWAC1Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 2 500 000 PRODUCTS (SYMBOL2_5Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 5 000 000 PRODUCTS (SYMBOL5Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 10 000 000 PRODUCTS (SYMBOL10Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

GLOBAL IDENTIFIER (GlobalID) [Global ID;Yes;Pop_Aut] A unique system generated Global Identifier. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

General - All Scales

International Boundary General should be defined and redefined as per information supplied by Geoscience Australia's 'Law of the Sea and Maritime Boundary Advice Project'.

All International boundaries will be shown.

General - All Scales

The names of the Countries will be shown on the relevant side of the boundary as CartographyAnno.

General - All Scales

The names of the Countries will be shown on the relevant side of the boundary as CartographyAnno.

State Border, Cartography Anno 100K, Cartography Anno 250K, Cartography Anno WAC, Cartography Anno 2_5MIL, Cartography Anno 5MIL, Cartography Anno 10MIL

GEODATA TOPO250K, NTMS 100K, NTMS 250K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Mining Reserve

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature.

4

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

MiningReserve

ADMINISTRATION NAME (ADMINNAME) [String;Yes;100;0;0;Pop_Wk] The official (gazetted) name of the Administration Area (or if an official name is unknown, the common name used to designate this area).

The name of the Mining Reserve

AMINISTRATION ID (ADMINID) [Integer;Yes;0;8;0;Pop_Aut] The Administration Area Identifier used to link the original source data to the converted data.

AGENCY PERSISTENT IDENTIFIER (AGENCYPID) [String;Yes;10;0;0;Pop_Wk] The source agency's persistent identifier;

CONTROLLING AUTHORITY (AUTHORITY) [String;Yes;100;0;0;Pop_Req] Name of controlling authority.

CLASSIFICATION (CLASS) [String;Yes(No);40;0;0;Pop_Req] The entities classification or status;

This field is not applicable to this subtype and therefore is currently not to be populated;

CURRENCY (CURRENCY) [Date;Yes;36;0;0;Pop_Wk] Date data was received or confirmed to be correct as per available information at the time.

FEATURE AREA (FEATAREA) [Double;Yes;0;38;8;Pop_Wk] The declared area of the reserve, as opposed to a machine calculated area, recorded to the nearest hectare.

IUCN CODING SYSTEM (IUCN) [String;Yes;4;0;0;Pop_Wk] Internationally defined set of management (World Conservation Union) categories.

LATEST GAZETTEER ENTRY (LATEST_GAZ) [Date;Yes;36;0;0;Pop_Wk] The date of the most recent gazetted amendment or verification by the relevant state authority.

PROCLAIMED DATE (PROCLAIMED) [Date;Yes;36;0;0;Pop_Wk] The Gazettal date of the original proclamation of the Administration Area.

PROVIDER (PROVIDER) [String;Yes;100;0;0;Pop_Req] The provider of the data spatial/attribute representation.

STATE/TERRITORY (STATE) [String;Yes(No);30;0;0;Pop_Req] Australian/Foreign State or Territory identifier code;

Acceptable Domain Entries from dm_IslandState;
AUSTRALIAN CAPITAL TERRITORY
EAST TIMOR
INDONESIA
JERVIS BAY TERRITORY
NEW SOUTH WALES
NORTHERN TERRITORY
NOT APPLICABLE
PAPUA NEW GUINEA
QUEENSLAND
SOUTH AUSTRALIA
TASMANIA
VICTORIA
WESTERN AUSTRALIA

METADATA COMMENTS (METADATACOMMENT) [String;Yes;1000;0;0;Pop_Dep] Comments expanding on the issues related to data capture, representation or sources.

RESTRICTIONS ON USE (RESTRICTIONS) [String;Yes;50;0;0;Pop_Req] Specific restrictions for data usage as defined by licence agreements, land owners, agreements with other agencies supplying the data.

Acceptable Domain Entries from dm_Restrictions;
Australian Federal Govt Only
Australian Federal Govt plus NMI Map Products
Geoscience Australia Only
Geoscience Australia plus NMI Map Products
NMI Only
NMI Only plus NMI Map Products
NMI Use for 3rd Party
NMI Use for 3rd Party plus NMI Map Products
Public Access
Whole of Govt Only
Whole of Govt plus NMI Map Products

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

STAKEHOLDERID (STKEHDRID) [String;Yes;250;0;0;Pop_Wk] This is the id used by GA stakeholders or collaborators to identify the link between data maintained, captured or held by GA and their own datasets.

STAKEHOLDER NAME RELATED TO ID ENTRY (STKEHDRNAME) [String;Yes;250;0;0;Pop_Wk] This is the name of stakeholders or collaborators from whom the stakeholderid has been derived and data link is maintained.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

Acceptable Domain Entries from dm_UpperScale;
0
25000
50000
100000

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;25;0;0;Pop_Dep] Classification of upper scale certainty;

Acceptable Domain Entries from dm_USCertainty;
Automatically Assigned
Definite
Indefinite
Undefined

DIMENSION (DIMENSION) [Double;Yes;0;15;0;Pop_Dep] This is the dimension of the linear feature in metres or the polygon feature in square metres as measured in the MGA94 projection of the appropriate zone. This field will be populated internally by Geoscience Australia and should not be altered in any form by producers.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;5;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

GLOBAL IDENTIFIER (GlobalID) [Global ID;Yes;Pop_Aut] A unique system generated Global Identifier. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

General - All Scales

All Mining Reserves obtained from designated Authoritative Providers will be included within the database regardless of size.

The UPPERSCALE value will be applied based on a 'Mining Reserves' meeting the minimum size for data capture/map representation. Where a named Mining Reserve is broken up into a number of areas with the identical attributes of 'NAME' and 'AUTHORITY', then all the component areas should be assigned the 'UPPERSCALE' value based on the total area of the sum of the component parts.

General - All Scales

Mining Reserves will not be included on standard NTMS map/data products.

Section 2 Chapter 5.8
Section 3 Chapters 5.16, 5.17, 5.18, 5.20

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Nature Conservation Reserve

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature.

5

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

NatureConservationReserve

ADMINISTRATION NAME (ADMINNAME) [String;Yes;100;0;0;Pop_Wk] The official (gazetted) name of the Administration Area (or if an official name is unknown, the common name used to designate this area).

The name of the Nature Conservation Reserve (see Geodatabase Rules for population requirements.)

AMINISTRATION ID (ADMINID) [Integer;Yes;0;8;0;Pop_Aut] The Administration Area Identifier used to link the original source data to the converted data.

AGENCY PERSISTENT IDENTIFIER (AGENCYPID) [String;Yes;10;0;0;Pop_Wk] The source agency's persistent identifier;

CONTROLLING AUTHORITY (AUTHORITY) [String;Yes;100;0;0;Pop_Req] Name of controlling authority.

CLASSIFICATION (CLASS) [String;Yes(No);40;0;0;Pop_Req] The entities classification or status;

This field is not applicable to this subtype and therefore is currently not to be populated;

CURRENCY (CURRENCY) [Date;Yes;36;0;0;Pop_Wk] Date data was received or confirmed to be correct as per available information at the time.

FEATURE AREA (FEATAREA) [Double;Yes;0;38;8;Pop_Wk] The declared area of the reserve, as opposed to a machine calculated area, recorded to the nearest hectare.

IUCN CODING SYSTEM (IUCN) [String;Yes;4;0;0;Pop_Wk] Internationally defined set of management (World Conservation Union) categories.

LATEST GAZETTEER ENTRY (LATEST_GAZ) [Date;Yes;36;0;0;Pop_Wk] The date of the most recent gazetted amendment or verification by the relevant state authority.

PROCLAIMED DATE (PROCLAIMED) [Date;Yes;36;0;0;Pop_Wk] The Gazettal date of the original proclamation of the Administration Area.

PROVIDER (PROVIDER) [String;Yes;100;0;0;Pop_Req] The provider of the data spatial/attribute representation.

STATE/TERRITORY (STATE) [String;Yes(No);30;0;0;Pop_Req] Australian/Foreign State or Territory identifier code;

Acceptable Domain Entries from dm_IslandState;
AUSTRALIAN CAPITAL TERRITORY
EAST TIMOR
INDONESIA
JERVIS BAY TERRITORY
NEW SOUTH WALES
NORTHERN TERRITORY
NOT APPLICABLE
PAPUA NEW GUINEA
QUEENSLAND
SOUTH AUSTRALIA
TASMANIA
VICTORIA
WESTERN AUSTRALIA

METADATA COMMENTS (METADATACOMMENT) [String;Yes;1000;0;0;Pop_Dep] Comments expanding on the issues related to data capture, representation or sources.

RESTRICTIONS ON USE (RESTRICTIONS) [String;Yes;50;0;0;Pop_Req] Specific restrictions for data usage as defined by licence agreements, land owners, agreements with other agencies supplying the data.

Acceptable Domain Entries from dm_Restrictions;
Australian Federal Govt Only
Australian Federal Govt plus NMI Map Products
Geoscience Australia Only
Geoscience Australia plus NMI Map Products
NMI Only
NMI Only plus NMI Map Products
NMI Use for 3rd Party
NMI Use for 3rd Party plus NMI Map Products
Public Access
Whole of Govt Only
Whole of Govt plus NMI Map Products

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

STAKEHOLDERID (STKEHDRID) [String;Yes;250;0;0;Pop_Wk] This is the id used by GA stakeholders or collaborators to identify the link between data maintained, captured or held by GA and their own datasets.

STAKEHOLDER NAME RELATED TO ID ENTRY (STKEHDRNAME) [String;Yes;250;0;0;Pop_Wk] This is the name of stakeholders or collaborators from whom the stakeholderid has been derived and data link is maintained.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

Acceptable Domain Entries from dm_UpperScale;
0
25000
50000
100000
250000

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;25;0;0;Pop_Dep] Classification of upper scale certainty;

Acceptable Domain Entries from dm_USCertainty;
Automatically Assigned
Definite
Indefinite
Undefined

DIMENSION (DIMENSION) [Double;Yes;0;15;0;Pop_Dep] This is the dimension of the linear feature in metres or the polygon feature in square metres as measured in the MGA94 projection of the appropriate zone. This field will be populated internally by Geoscience Australia and should not be altered in any form by producers.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;5;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

GLOBAL IDENTIFIER (GlobalID) [Global ID;Yes;Pop_Aut] A unique system generated Global Identifier. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

General - All Scales

All Nature Conservation Reserves obtained from designated Authoritative Providers will be included within the database regardless of size.

The Authority classification for reserve areas should not be populated with 'Not Applicable'. All reserves whose authority is not known, should have a authority value of 'Other (not specified)'.

Indigenous sacred sites will not be named as sacred sites on the map even if named on a previous edition map, but the feature may be a lake, pool or waterhole in which case the appropriate map symbol and hydrological name will be used.

Nature Conservation Reserve features will be named where named in the databases obtained from the designated Authoritative Providers. Where the reserve is identified by a number only, the name field will populated with the type of reserve (e.g. Marine Park) and the number will not be translated from the database supplied by the designated Authoritative providers.

The UPPERSCALE value will be applied based on a 'Nature Conservation Reserves' meeting the minimum size for data capture/map representation. Where a named Nature Conservation Reserve is broken up into a number of areas with the identical attributes of 'NAME' and 'AUTHORITY', then all the component areas should be assigned the 'UPPERSCALE' value based on the total area of the sum of the component parts.

General - All Scales

Nature Conservation Reserves can only overlap the following features in the Administration Feature Dataset:
Other Nature Conservation Reserves, Defence And Prohibited areas and Water Supply Reserves.

When the dimension is equal to or greater than 500 000 for:
-a specific Administration Area, or
-a set of named reserve areas which have identical attribute combinations using the FEATURE TYPE, NAME and AUTHORITY fields,
the following paragraph will apply:

Where the edge of a Administration Area polygon has a similar shape to another Administration Area feature (of the following feature types: Defence And Prohibited, Forestry Reserve, Indigenous Land, Nature Conservation Reserve, Water Supply Reserve), and is within 50 metres of the feature, then the relevant section of polygon edge for the Administration Area will be coincident with this other feature. Where both features are of similar shape but the distance separating them is greater than 50 metres the relevant section of polygon edge for the Administration Area will be made coincident with the feature if it appears the relevant section of polygon edge for the Administration Area should be following the feature. These rules will not apply where two reserves are separated by a road reserve. In such cases the separation between the two boundaries will be maintained.

General - All Scales

When the dimension is equal to or greater than 500 000 for:
-a specific Administration Area, or
-a set of named reserve areas which have identical attribute combinations using the FEATURE TYPE, NAME and AUTHORITY fields,
the following rules will apply:

Where the edge of a Administration Area (of the following feature types: Defence And Prohibited, Forestry Reserve, Indigenous Land, Nature Conservation Reserve, Water Supply Reserve) has a similar shape to a feature listed below, it must be coincident with that feature if the feature meets the minimum size criteria for 1:100 000 or 1:250 000 and:
- the edge of the Administration Area falls within 50 metres of the feature, or
- the edge of the Administration Area appears that it should follow the feature.

Aerial Cableway
Canal Line
Cleared Line
Conveyor
Dam Wall
Discontinuities
Fence
Foot Track
InternationalBoundary
Railway
Road
Sea Wall
Shoreline
State Border
Pipelines (feature class)
PowerlineTransmissionNetwork
Watercourse
AircraftFacilityAreas (feature class (polygon edge))
Builtup Area (feature type (polygon edge))
Canal Area (feature type (polygon edge)
Cemetery Area (feature type (polygon edge))
Crater (feature type (polygon edge))
Deformation Areas (feature class (polygon edge))
Flats (feature class (polygon edge))
Lake (feature type (polygon edge))
Landmark Area (feature type (polygon edge))
Mine Area (feature type (polygon edge ))
Pondage Areas (feature class (polygon edge))
Recreation Area (feature type (polygon edge))
Reservoirs (feature class (polygon edge))
Waste Management Area (feature type (polygon edge))
Watercourse Area (feature type (polygon edge))

The above rules will not apply where two reserves are separated by a road reserve. In such cases the separation between the two boundaries will be maintained.

General - All Scales

Nature Conservation Reserves s will be named where named in the database. Where the reserve is identified by a number only, the Nature Conservation Reserve will be labelled with the type of reserve (e.g. Marine Park) and the number will not be shown.

Only 'Nature Conservation Reserve' areas which have an Upperscale equal to or greater than the applicable map scale of the product being produced will be represented on the map face.(eg For a 'Nature Conservation Reserve' area to be represented on a 1:100 000 product it must have an Upperscale value of '100000' or '250000')

Section 2 Chapter 5.8
Section 3 Chapters 5.16, 5.17, 5.18, 5.20

NTMS 100K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Protection Zone

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature.

13

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

ProtectionZone

COUNTRY NAME 1 (COUNTRYNAME1) [String;Yes;60;0;0;Pop_Dep] The name of the country on one side of an international boundary.

COUNTRY NAME 2 (COUNTRYNAME2) [String;Yes;60;0;0;Pop_Dep] The name of the country on one side of an international boundary not designated by the Country name 1 field.

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digital data for initial capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6) ; Most Recent Reliability Date of Revision Source Material (or Base Material/digital data for initial capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. (See Section 1 Chapter 3.7 Positional Accuracy for more information);

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

This field is not applicable to this subtype and therefore is currently not to be populated;

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;25;0;0;Pop_Dep] Classification of upper scale certainty;

This field is not applicable to this subtype and therefore is currently not to be populated;

TEXT NOTE (TEXTNOTE) [String;Yes;50;0;0;Pop_Dep] Descriptive note to appear on map. Text Note field should be added when directed in the Geodatabase Rules or if descriptive information is known about a feature that is not covered by any other item in the feature class and expands on the definition of the feature.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;5;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 1 000 000 PRODUCTS (SYMBOLWAC1Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 2 500 000 PRODUCTS (SYMBOL2_5Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 5 000 000 PRODUCTS (SYMBOL5Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 10 000 000 PRODUCTS (SYMBOL10Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

GLOBAL IDENTIFIER (GlobalID) [Global ID;Yes;Pop_Aut] A unique system generated Global Identifier. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

General - All Scales

International Boundary General should be defined and redefined as per information supplied by Geoscience Australia's 'Law of the Sea and Maritime Boundary Advice Project' or the Department of Foreign Affairs (if Land Based).

All International boundaries will be shown.

General - All Scales

The names of the Countries will be shown on the relevant side of the boundary as CartographyAnno.

General - All Scales

The names of the Countries will be shown on the relevant side of the boundary as CartographyAnno.

State Border, Cartography Anno 100K, Cartography Anno 250K, Cartography Anno WAC, Cartography Anno 2_5MIL, Cartography Anno 5MIL, Cartography Anno 10MIL

GEODATA TOPO250K, NTMS 100K, NTMS 250K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Reserved Crown Land

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature.

6

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

ReservedCrownLand

ADMINISTRATION NAME (ADMINNAME) [String;Yes;100;0;0;Pop_Wk] The official (gazetted) name of the Administration Area (or if an official name is unknown, the common name used to designate this area).

The name of the Reserved Crown Land

AMINISTRATION ID (ADMINID) [Integer;Yes;0;8;0;Pop_Aut] The Administration Area Identifier used to link the original source data to the converted data.

AGENCY PERSISTENT IDENTIFIER (AGENCYPID) [String;Yes;10;0;0;Pop_Wk] The source agency's persistent identifier;

CONTROLLING AUTHORITY (AUTHORITY) [String;Yes;100;0;0;Pop_Req] Name of controlling authority.

CLASSIFICATION (CLASS) [String;Yes(No);40;0;0;Pop_Req] The entities classification or status;

This field is not applicable to this subtype and therefore is currently not to be populated;

CURRENCY (CURRENCY) [Date;Yes;36;0;0;Pop_Wk] Date data was received or confirmed to be correct as per available information at the time.

FEATURE AREA (FEATAREA) [Double;Yes;0;38;8;Pop_Wk] The declared area of the reserve, as opposed to a machine calculated area, recorded to the nearest hectare.

IUCN CODING SYSTEM (IUCN) [String;Yes;4;0;0;Pop_Wk] Internationally defined set of management (World Conservation Union) categories.

LATEST GAZETTEER ENTRY (LATEST_GAZ) [Date;Yes;36;0;0;Pop_Wk] The date of the most recent gazetted amendment or verification by the relevant state authority.

PROCLAIMED DATE (PROCLAIMED) [Date;Yes;36;0;0;Pop_Wk] The Gazettal date of the original proclamation of the Administration Area.

PROVIDER (PROVIDER) [String;Yes;100;0;0;Pop_Req] The provider of the data spatial/attribute representation.

STATE/TERRITORY (STATE) [String;Yes(No);30;0;0;Pop_Req] Australian/Foreign State or Territory identifier code;

Acceptable Domain Entries from dm_IslandState;
AUSTRALIAN CAPITAL TERRITORY
EAST TIMOR
INDONESIA
JERVIS BAY TERRITORY
NEW SOUTH WALES
NORTHERN TERRITORY
NOT APPLICABLE
PAPUA NEW GUINEA
QUEENSLAND
SOUTH AUSTRALIA
TASMANIA
VICTORIA
WESTERN AUSTRALIA

METADATA COMMENTS (METADATACOMMENT) [String;Yes;1000;0;0;Pop_Dep] Comments expanding on the issues related to data capture, representation or sources.

RESTRICTIONS ON USE (RESTRICTIONS) [String;Yes;50;0;0;Pop_Req] Specific restrictions for data usage as defined by licence agreements, land owners, agreements with other agencies supplying the data.

Acceptable Domain Entries from dm_Restrictions;
Australian Federal Govt Only
Australian Federal Govt plus NMI Map Products
Geoscience Australia Only
Geoscience Australia plus NMI Map Products
NMI Only
NMI Only plus NMI Map Products
NMI Use for 3rd Party
NMI Use for 3rd Party plus NMI Map Products
Public Access
Whole of Govt Only
Whole of Govt plus NMI Map Products

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

STAKEHOLDERID (STKEHDRID) [String;Yes;250;0;0;Pop_Wk] This is the id used by GA stakeholders or collaborators to identify the link between data maintained, captured or held by GA and their own datasets.

STAKEHOLDER NAME RELATED TO ID ENTRY (STKEHDRNAME) [String;Yes;250;0;0;Pop_Wk] This is the name of stakeholders or collaborators from whom the stakeholderid has been derived and data link is maintained.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

Acceptable Domain Entries from dm_UpperScale;
0
25000
50000
100000

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;25;0;0;Pop_Dep] Classification of upper scale certainty;

Acceptable Domain Entries from dm_USCertainty;
Automatically Assigned
Definite
Indefinite
Undefined

DIMENSION (DIMENSION) [Double;Yes;0;15;0;Pop_Dep] This is the dimension of the linear feature in metres or the polygon feature in square metres as measured in the MGA94 projection of the appropriate zone. This field will be populated internally by Geoscience Australia and should not be altered in any form by producers.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;5;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

GLOBAL IDENTIFIER (GlobalID) [Global ID;Yes;Pop_Aut] A unique system generated Global Identifier. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

General - All Scales

All Reserve Crown Lands obtained from designated Authoritative Providers will be included within the database regardless of size.

The UPPERSCALE value will be applied based on a 'Reserved Crown Land' meeting the minimum size for data capture/map representation. Where a named Reserved Crown Land is broken up into a number of areas with the identical attributes of 'NAME' and 'AUTHORITY', then all the component areas should be assigned the 'UPPERSCALE' value based on the total area of the sum of the component parts.

General - All Scales

Reserved Crown Land will not be included on standard NTMS map/data products.

Section 2 Chapter 5.8
Section 3 Chapters 5.16, 5.17, 5.18, 5.20

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Seabed and Fisheries Jurisdctn

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature.

14

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

SeabedandFisheriesJurisdctn

COUNTRY NAME 1 (COUNTRYNAME1) [String;Yes;60;0;0;Pop_Dep] The name of the country on one side of an international boundary.

COUNTRY NAME 2 (COUNTRYNAME2) [String;Yes;60;0;0;Pop_Dep] The name of the country on one side of an international boundary not designated by the Country name 1 field.

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digital data for initial capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6) ; Most Recent Reliability Date of Revision Source Material (or Base Material/digital data for initial capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. (See Section 1 Chapter 3.7 Positional Accuracy for more information);

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

This field is not applicable to this subtype and therefore is currently not to be populated;

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;25;0;0;Pop_Dep] Classification of upper scale certainty;

This field is not applicable to this subtype and therefore is currently not to be populated;

TEXT NOTE (TEXTNOTE) [String;Yes;50;0;0;Pop_Dep] Descriptive note to appear on map. Text Note field should be added when directed in the Geodatabase Rules or if descriptive information is known about a feature that is not covered by any other item in the feature class and expands on the definition of the feature.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;5;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 1 000 000 PRODUCTS (SYMBOLWAC1Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 2 500 000 PRODUCTS (SYMBOL2_5Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 5 000 000 PRODUCTS (SYMBOL5Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 10 000 000 PRODUCTS (SYMBOL10Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

GLOBAL IDENTIFIER (GlobalID) [Global ID;Yes;Pop_Aut] A unique system generated Global Identifier. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

General - All Scales

International Boundary General should be defined and redefined as per information supplied by Geoscience Australia's 'Law of the Sea and Maritime Boundary Advice Project'.

All International boundaries will be shown.

General - All Scales

The names of the Countries will be shown on the relevant side of the boundary as CartographyAnno.

General - All Scales

The names of the Countries will be shown on the relevant side of the boundary as CartographyAnno.

State Border, Cartography Anno 100K, Cartography Anno 250K, Cartography Anno WAC, Cartography Anno 2_5MIL, Cartography Anno 5MIL, Cartography Anno 10MIL

GEODATA TOPO250K, NTMS 100K, NTMS 250K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Seabed Jurisdiction Line

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature.

15

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

SeabedJurisdictionLine

COUNTRY NAME 1 (COUNTRYNAME1) [String;Yes;60;0;0;Pop_Dep] The name of the country on one side of an international boundary.

COUNTRY NAME 2 (COUNTRYNAME2) [String;Yes;60;0;0;Pop_Dep] The name of the country on one side of an international boundary not designated by the Country name 1 field.

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digital data for initial capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6) ; Most Recent Reliability Date of Revision Source Material (or Base Material/digital data for initial capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. (See Section 1 Chapter 3.7 Positional Accuracy for more information);

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

This field is not applicable to this subtype and therefore is currently not to be populated;

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;25;0;0;Pop_Dep] Classification of upper scale certainty;

This field is not applicable to this subtype and therefore is currently not to be populated;

TEXT NOTE (TEXTNOTE) [String;Yes;50;0;0;Pop_Dep] Descriptive note to appear on map. Text Note field should be added when directed in the Geodatabase Rules or if descriptive information is known about a feature that is not covered by any other item in the feature class and expands on the definition of the feature.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;5;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 1 000 000 PRODUCTS (SYMBOLWAC1Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 2 500 000 PRODUCTS (SYMBOL2_5Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 5 000 000 PRODUCTS (SYMBOL5Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 10 000 000 PRODUCTS (SYMBOL10Mil) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

GLOBAL IDENTIFIER (GlobalID) [Global ID;Yes;Pop_Aut] A unique system generated Global Identifier. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

General - All Scales

International Boundary General should be defined and redefined as per information supplied by Geoscience Australia's 'Law of the Sea and Maritime Boundary Advice Project'.

All International boundaries will be shown.

General - All Scales

The names of the Countries will be shown on the relevant side of the boundary as CartographyAnno.

General - All Scales

The names of the Countries will be shown on the relevant side of the boundary as CartographyAnno.

State Border, Cartography Anno 100K, Cartography Anno 250K, Cartography Anno WAC, Cartography Anno 2_5MIL, Cartography Anno 5MIL, Cartography Anno 10MIL

GEODATA TOPO250K, NTMS 100K, NTMS 250K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Sundry Reserve

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature.

7

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

SundryReserve

ADMINISTRATION NAME (ADMINNAME) [String;Yes;100;0;0;Pop_Wk] The official (gazetted) name of the Administration Area (or if an official name is unknown, the common name used to designate this area).

The name of the Sundry Reserve

AMINISTRATION ID (ADMINID) [Integer;Yes;0;8;0;Pop_Aut] The Administration Area Identifier used to link the original source data to the converted data.

AGENCY PERSISTENT IDENTIFIER (AGENCYPID) [String;Yes;10;0;0;Pop_Wk] The source agency's persistent identifier;

CONTROLLING AUTHORITY (AUTHORITY) [String;Yes;100;0;0;Pop_Req] Name of controlling authority.

CLASSIFICATION (CLASS) [String;Yes(No);40;0;0;Pop_Req] The entities classification or status;

This field is not applicable to this subtype and therefore is currently not to be populated;

CURRENCY (CURRENCY) [Date;Yes;36;0;0;Pop_Wk] Date data was received or confirmed to be correct as per available information at the time.

FEATURE AREA (FEATAREA) [Double;Yes;0;38;8;Pop_Wk] The declared area of the reserve, as opposed to a machine calculated area, recorded to the nearest hectare.

IUCN CODING SYSTEM (IUCN) [String;Yes;4;0;0;Pop_Wk] Internationally defined set of management (World Conservation Union) categories.

LATEST GAZETTEER ENTRY (LATEST_GAZ) [Date;Yes;36;0;0;Pop_Wk] The date of the most recent gazetted amendment or verification by the relevant state authority.

PROCLAIMED DATE (PROCLAIMED) [Date;Yes;36;0;0;Pop_Wk] The Gazettal date of the original proclamation of the Administration Area.

PROVIDER (PROVIDER) [String;Yes;100;0;0;Pop_Req] The provider of the data spatial/attribute representation.

STATE/TERRITORY (STATE) [String;Yes(No);30;0;0;Pop_Req] Australian/Foreign State or Territory identifier code;

Acceptable Domain Entries from dm_IslandState;
AUSTRALIAN CAPITAL TERRITORY
EAST TIMOR
INDONESIA
JERVIS BAY TERRITORY
NEW SOUTH WALES
NORTHERN TERRITORY
NOT APPLICABLE
PAPUA NEW GUINEA
QUEENSLAND
SOUTH AUSTRALIA
TASMANIA
VICTORIA
WESTERN AUSTRALIA

METADATA COMMENTS (METADATACOMMENT) [String;Yes;1000;0;0;Pop_Dep] Comments expanding on the issues related to data capture, representation or sources.

RESTRICTIONS ON USE (RESTRICTIONS) [String;Yes;50;0;0;Pop_Req] Specific restrictions for data usage as defined by licence agreements, land owners, agreements with other agencies supplying the data.

Acceptable Domain Entries from dm_Restrictions;
Australian Federal Govt Only
Australian Federal Govt plus NMI Map Products
Geoscience Australia Only
Geoscience Australia plus NMI Map Products
NMI Only
NMI Only plus NMI Map Products
NMI Use for 3rd Party
NMI Use for 3rd Party plus NMI Map Products
Public Access
Whole of Govt Only
Whole of Govt plus NMI Map Products

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

STAKEHOLDERID (STKEHDRID) [String;Yes;250;0;0;Pop_Wk] This is the id used by GA stakeholders or collaborators to identify the link between data maintained, captured or held by GA and their own datasets.

STAKEHOLDER NAME RELATED TO ID ENTRY (STKEHDRNAME) [String;Yes;250;0;0;Pop_Wk] This is the name of stakeholders or collaborators from whom the stakeholderid has been derived and data link is maintained.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

Acceptable Domain Entries from dm_UpperScale;
0
25000
50000
100000

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;25;0;0;Pop_Dep] Classification of upper scale certainty;

Acceptable Domain Entries from dm_USCertainty;
Automatically Assigned
Definite
Indefinite
Undefined

DIMENSION (DIMENSION) [Double;Yes;0;15;0;Pop_Dep] This is the dimension of the linear feature in metres or the polygon feature in square metres as measured in the MGA94 projection of the appropriate zone. This field will be populated internally by Geoscience Australia and should not be altered in any form by producers.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;5;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

GLOBAL IDENTIFIER (GlobalID) [Global ID;Yes;Pop_Aut] A unique system generated Global Identifier. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

General - All Scales

All Sundry Reserves obtained from designated Authoritative Providers will be included within the database regardless of size.

The UPPERSCALE value will be applied based on a 'Sundry Reserve' meeting the minimum size for data capture/map representation. Where a named Sundry Reserve is broken up into a number of areas with the identical attributes of 'NAME' and 'AUTHORITY', then all the component areas should be assigned the 'UPPERSCALE' value based on the total area of the sum of the component parts.

General - All Scales

Sundry Reserves will not be included on standard NTMS map/data products.

Section 2 Chapter 5.8
Section 3 Chapters 5.16, 5.17, 5.18, 5.20

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Vacant Crown Land

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature.

8

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

VacantCrownLand

ADMINISTRATION NAME (ADMINNAME) [String;Yes;100;0;0;Pop_Wk] The official (gazetted) name of the Administration Area (or if an official name is unknown, the common name used to designate this area).

The name of the Vacant Crown Land

AMINISTRATION ID (ADMINID) [Integer;Yes;0;8;0;Pop_Aut] The Administration Area Identifier used to link the original source data to the converted data.

AGENCY PERSISTENT IDENTIFIER (AGENCYPID) [String;Yes;10;0;0;Pop_Wk] The source agency's persistent identifier;

CONTROLLING AUTHORITY (AUTHORITY) [String;Yes;100;0;0;Pop_Req] Name of controlling authority.

CLASSIFICATION (CLASS) [String;Yes(No);40;0;0;Pop_Req] The entities classification or status;

This field is not applicable to this subtype and therefore is currently not to be populated;

CURRENCY (CURRENCY) [Date;Yes;36;0;0;Pop_Wk] Date data was received or confirmed to be correct as per available information at the time.

FEATURE AREA (FEATAREA) [Double;Yes;0;38;8;Pop_Wk] The declared area of the reserve, as opposed to a machine calculated area, recorded to the nearest hectare.

IUCN CODING SYSTEM (IUCN) [String;Yes;4;0;0;Pop_Wk] Internationally defined set of management (World Conservation Union) categories.

LATEST GAZETTEER ENTRY (LATEST_GAZ) [Date;Yes;36;0;0;Pop_Wk] The date of the most recent gazetted amendment or verification by the relevant state authority.

PROCLAIMED DATE (PROCLAIMED) [Date;Yes;36;0;0;Pop_Wk] The Gazettal date of the original proclamation of the Administration Area.

PROVIDER (PROVIDER) [String;Yes;100;0;0;Pop_Req] The provider of the data spatial/attribute representation.

STATE/TERRITORY (STATE) [String;Yes(No);30;0;0;Pop_Req] Australian/Foreign State or Territory identifier code;

Acceptable Domain Entries from dm_IslandState;
AUSTRALIAN CAPITAL TERRITORY
EAST TIMOR
INDONESIA
JERVIS BAY TERRITORY
NEW SOUTH WALES
NORTHERN TERRITORY
NOT APPLICABLE
PAPUA NEW GUINEA
QUEENSLAND
SOUTH AUSTRALIA
TASMANIA
VICTORIA
WESTERN AUSTRALIA

METADATA COMMENTS (METADATACOMMENT) [String;Yes;1000;0;0;Pop_Dep] Comments expanding on the issues related to data capture, representation or sources.

RESTRICTIONS ON USE (RESTRICTIONS) [String;Yes;50;0;0;Pop_Req] Specific restrictions for data usage as defined by licence agreements, land owners, agreements with other agencies supplying the data.

Acceptable Domain Entries from dm_Restrictions;
Australian Federal Govt Only
Australian Federal Govt plus NMI Map Products
Geoscience Australia Only
Geoscience Australia plus NMI Map Products
NMI Only
NMI Only plus NMI Map Products
NMI Use for 3rd Party
NMI Use for 3rd Party plus NMI Map Products
Public Access
Whole of Govt Only
Whole of Govt plus NMI Map Products

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

STAKEHOLDERID (STKEHDRID) [String;Yes;250;0;0;Pop_Wk] This is the id used by GA stakeholders or collaborators to identify the link between data maintained, captured or held by GA and their own datasets.

STAKEHOLDER NAME RELATED TO ID ENTRY (STKEHDRNAME) [String;Yes;250;0;0;Pop_Wk] This is the name of stakeholders or collaborators from whom the stakeholderid has been derived and data link is maintained.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

Acceptable Domain Entries from dm_UpperScale;
0
25000
50000
100000

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;25;0;0;Pop_Dep] Classification of upper scale certainty;

Acceptable Domain Entries from dm_USCertainty;
Automatically Assigned
Definite
Indefinite
Undefined

DIMENSION (DIMENSION) [Double;Yes;0;15;0;Pop_Dep] This is the dimension of the linear feature in metres or the polygon feature in square metres as measured in the MGA94 projection of the appropriate zone. This field will be populated internally by Geoscience Australia and should not be altered in any form by producers.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;5;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

GLOBAL IDENTIFIER (GlobalID) [Global ID;Yes;Pop_Aut] A unique system generated Global Identifier. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

General - All Scales

All Vacant Crown Lands obtained from designated Authoritative Providers will be included within the database regardless of size.

The UPPERSCALE value will be applied based on a 'Vacant Crown Land' meeting the minimum size for data capture/map representation. Where a named Vacant Crown Land is broken up into a number of areas with the identical attributes of 'NAME' and 'AUTHORITY', then all the component areas should be assigned the 'UPPERSCALE' value based on the total area of the sum of the component parts.

General - All Scales

Vacant Crown Land will not be included on standard NTMS map/data products.

Section 2 Chapter 5.8
Section 3 Chapters 5.16, 5.17, 5.18, 5.20

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Water Supply Reserve

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature.

9

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

WaterSupplyReserve

ADMINISTRATION NAME (ADMINNAME) [String;Yes;100;0;0;Pop_Wk] The official (gazetted) name of the Administration Area (or if an official name is unknown, the common name used to designate this area).

The name of the Water Supply Reserve (see Geodatabase Rules for population requirements).

AMINISTRATION ID (ADMINID) [Integer;Yes;0;8;0;Pop_Aut] The Administration Area Identifier used to link the original source data to the converted data.

AGENCY PERSISTENT IDENTIFIER (AGENCYPID) [String;Yes;10;0;0;Pop_Wk] The source agency's persistent identifier;

CONTROLLING AUTHORITY (AUTHORITY) [String;Yes;100;0;0;Pop_Req] Name of controlling authority.

CLASSIFICATION (CLASS) [String;Yes(No);40;0;0;Pop_Req] The entities classification or status;

This field is not applicable to this subtype and therefore is currently not to be populated;

CURRENCY (CURRENCY) [Date;Yes;36;0;0;Pop_Wk] Date data was received or confirmed to be correct as per available information at the time.

FEATURE AREA (FEATAREA) [Double;Yes;0;38;8;Pop_Wk] The declared area of the reserve, as opposed to a machine calculated area, recorded to the nearest hectare.

IUCN CODING SYSTEM (IUCN) [String;Yes;4;0;0;Pop_Wk] Internationally defined set of management (World Conservation Union) categories.

LATEST GAZETTEER ENTRY (LATEST_GAZ) [Date;Yes;36;0;0;Pop_Wk] The date of the most recent gazetted amendment or verification by the relevant state authority.

PROCLAIMED DATE (PROCLAIMED) [Date;Yes;36;0;0;Pop_Wk] The Gazettal date of the original proclamation of the Administration Area.

PROVIDER (PROVIDER) [String;Yes;100;0;0;Pop_Req] The provider of the data spatial/attribute representation.

STATE/TERRITORY (STATE) [String;Yes(No);30;0;0;Pop_Req] Australian/Foreign State or Territory identifier code;

Acceptable Domain Entries from dm_IslandState;
AUSTRALIAN CAPITAL TERRITORY
EAST TIMOR
INDONESIA
JERVIS BAY TERRITORY
NEW SOUTH WALES
NORTHERN TERRITORY
NOT APPLICABLE
PAPUA NEW GUINEA
QUEENSLAND
SOUTH AUSTRALIA
TASMANIA
VICTORIA
WESTERN AUSTRALIA

METADATA COMMENTS (METADATACOMMENT) [String;Yes;1000;0;0;Pop_Dep] Comments expanding on the issues related to data capture, representation or sources.

RESTRICTIONS ON USE (RESTRICTIONS) [String;Yes;50;0;0;Pop_Req] Specific restrictions for data usage as defined by licence agreements, land owners, agreements with other agencies supplying the data.

Acceptable Domain Entries from dm_Restrictions;
Australian Federal Govt Only
Australian Federal Govt plus NMI Map Products
Geoscience Australia Only
Geoscience Australia plus NMI Map Products
NMI Only
NMI Only plus NMI Map Products
NMI Use for 3rd Party
NMI Use for 3rd Party plus NMI Map Products
Public Access
Whole of Govt Only
Whole of Govt plus NMI Map Products

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

STAKEHOLDERID (STKEHDRID) [String;Yes;250;0;0;Pop_Wk] This is the id used by GA stakeholders or collaborators to identify the link between data maintained, captured or held by GA and their own datasets.

STAKEHOLDER NAME RELATED TO ID ENTRY (STKEHDRNAME) [String;Yes;250;0;0;Pop_Wk] This is the name of stakeholders or collaborators from whom the stakeholderid has been derived and data link is maintained.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

Acceptable Domain Entries from dm_UpperScale;
0
25000
50000
100000
250000

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;25;0;0;Pop_Dep] Classification of upper scale certainty;

Acceptable Domain Entries from dm_USCertainty;
Automatically Assigned
Definite
Indefinite
Undefined

DIMENSION (DIMENSION) [Double;Yes;0;15;0;Pop_Dep] This is the dimension of the linear feature in metres or the polygon feature in square metres as measured in the MGA94 projection of the appropriate zone. This field will be populated internally by Geoscience Australia and should not be altered in any form by producers.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;5;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Line) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 100 000 PRODUCTS (SYMBOL100K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

SYMBOL FOR 250 000 PRODUCTS (SYMBOL250K_Shade) [Integer; Yes; 4; 0; 0; Pop_Dep] For Applicable Symbol numbers including core values see attached link; (See RepresentationFieldsTables_Administration.html)

GLOBAL IDENTIFIER (GlobalID) [Global ID;Yes;Pop_Aut] A unique system generated Global Identifier. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

General - All Scales

All Water Supply Reserves obtained from designated Authoritative Providers will be included within the database regardless of size.

The Authority classification for reserve areas should not be populated with 'Not Applicable'. All reserves whose authority is not known, should have a authority value of 'Other (not specified)'.

Water Supply Reserve features will be named where named in the databases supplied by the designated Authoritative Providers. Where the reserve is identified by a number only, the name field will populated with the type of reserve (e.g. Water Supply Reserve) and the number will not be translated from the database supplied by the designated Authoritative providers.

Where a Water Supply Reserve surrounds, or is coincident with a waterbody of the same root name, name the waterbody in the Waterbodies feature dataset and populate the Water Supply Reserve feature type with the generic name 'Water Supply Reserve' in the name field.

Water Supply Reserves in Western Australia are to be excluded from the NTDBs, the exception will be those Water Supply Reserves, with restricted access, which are used for urban consumption.

The UPPERSCALE value will be applied based on a 'Water Supply Reserves' meeting the minimum size for data capture/map representation. Where a named Water Supply Reserve is broken up into a number of areas with the identical attributes of 'NAME' and 'AUTHORITY', then all the component areas should be assigned the 'UPPERSCALE' value based on the total area of the sum of the component parts.

General - All Scales

Water Supply Reserves can only overlap the following features in the Administration Feature Dataset:
Nature Conservation Reserves and Forestry Reserves.

When the dimension is equal to or greater than 500 000 for:
-a specific Administration Area, or
-a set of named reserve areas which have identical attribute combinations using the FEATURE TYPE, NAME and AUTHORITY fields,
the following paragraph will apply:

Where the edge of a Administration Area polygon has a similar shape to another Administration Area feature (of the following feature types: Defence And Prohibited, Forestry Reserve, Indigenous Land, Nature Conservation Reserve, Water Supply Reserve), and is within 50 metres of the feature, then the relevant section of polygon edge for the Administration Area will be coincident with this other feature. Where both features are of similar shape but the distance separating them is greater than 50 metres the relevant section of polygon edge for the Administration Area will be made coincident with the feature if it appears the relevant section of polygon edge for the Administration Area should be following the feature. These rules will not apply where two reserves are separated by a road reserve. In such cases the separation between the two boundaries will be maintained.

General - All Scales

When the dimension is equal to or greater than 500 000 for:
-a specific Administration Area, or
-a set of named reserve areas which have identical attribute combinations using the FEATURE TYPE, NAME and AUTHORITY fields,
the following rules will apply:

Where the edge of a Administration Area (of the following feature types: Defence And Prohibited, Forestry Reserve, Indigenous Land, Nature Conservation Reserve, Water Supply Reserve) has a similar shape to a feature listed below, it must be coincident with that feature if the feature meets the minimum size criteria for 1:100 000 or 1:250 000 and:
- the edge of the Administration Area falls within 50 metres of the feature, or
- the edge of the Administration Area appears that it should follow the feature.

Aerial Cableway
Canal Line
Cleared Line
Conveyor
Dam Wall
Discontinuities
Fence
Foot Track
InternationalBoundary
Railway
Road
Sea Wall
Shoreline
State Border
Pipelines (feature class)
PowerlineTransmissionNetwork
Watercourse
AircraftFacilityAreas (feature class (polygon edge))
Builtup Area (feature type (polygon edge))
Canal Area (feature type (polygon edge)
Cemetery Area (feature type (polygon edge))
Crater (feature type (polygon edge))
Deformation Areas (feature class (polygon edge))
Flats (feature class (polygon edge))
Lake (feature type (polygon edge))
Landmark Area (feature type (polygon edge))
Mine Area (feature type (polygon edge ))
Pondage Areas (feature class (polygon edge))
Recreation Area (feature type (polygon edge))
Reservoirs (feature class (polygon edge))
Waste Management Area (feature type (polygon edge))
Watercourse Area (feature type (polygon edge))

The above rules will not apply where two reserves are separated by a road reserve. In such cases the separation between the two boundaries will be maintained.

General - All Scales

Water Supply Reserve features will be named where named in the database. Where the reserve is identified by a number only, the Water Supply Reserve will be labelled with the type of reserve (e.g. Water Supply Reserve) and the number will not be shown.

Where a Water Supply Reserve surrounds, or is coincident with a waterbody of the same root name, name the waterbody in the Waterbodies cover and do not name the Water Supply Reserve.However a descriptive note 'water supply reserve' should be added in parenthesis following the waterbody name.

Only 'Water Supply Reserve' areas which have an Upperscale equal to or greater than the applicable map scale of the product being produced will be represented on the map face.(eg For a 'Water Supply Reserve' area to be represented on a 1:100 000 product it must have an Upperscale value of '100000' or '250000')

Section 2 Chapter 5.8
Section 3 Chapters 5.16, 5.17, 5.18, 5.20

NTMS 100K