Abstract

Geoscience Australia carried out a marine survey on Lord Howe Island shelf (NSW) in 2008 (SS062008) to map seabed bathymetry and characterise benthic environments through colocated sampling of surface sediments and infauna, rock coring, observation of benthic habitats using underwater towed video, and measurement of ocean tides and wavegenerated currents. Subbottom profile data was also collected to map sediment thickness and shelf stratigraphy. Data and samples were acquired using the National Facility Research Vessel Southern Surveyor. Bathymetric data from this survey was merged with other preexisting bathymetric data (including LADS) to generate a grid covering 1034 sq km. As part of a separate Geoscience Australia survey in 2007 (TAN0713), an oceanographic mooring was deployed on the northern edge of Lord Howe Island shelf. The mooring was recovered during the 2008 survey following a 6 month deployment. lh_4m is an ArcInfo grid of the Lord Howe survey area produced from the processed EM300 bathymetry data of the survey area using the CARIS HIPS and SIPS software.
Google map showing geographic bounding box with values North bound -31.3 East bound 159.4 West bound 158.94 South bound -31.9
Downloads
For information on acquiring this product,
please contact the Geoscience Australia Sales Centre via:

fax:
+61 2 6249 9960; or
phone:
1800 800 173 (within Australia);
 
+61 2 6249 9966 (outside Australia).

Please note that support hours are 9 am to 5 pm weekdays

Product Type/Sub Type

dataset - Marine Data - Bathymetry Grid

Constraints

license
Creative Commons Attribution 3.0 Australia Licence

IP Owner

Commonwealth of Australia (Geoscience Australia)

Author(s)

Date (publication)

2011

Product Type

dataset

Topic Category

geoscientificInformation

Keywords

Marine Data
Bathymetry Grid
marine
bathymetry
abiotic surrogates
Marine Geoscience

Resource Language

English

Resource Character Set

utf8

Resource Security Classification

unclassified

Geographic Extent

North bound
-31.3
East bound
159.4
West bound
158.94
South bound
-31.9

Lineage

Due to the good quality data being acquired, post processing of the raw data was kept to a minimum. Swath data was processed through Caris HIPS/SIPS version 7.2. First a vessel configuration file was created that the coordinates of the motion sensor and DGPS antenna and patch test offsets were recorded. A new project was then created and the vessel configuration file was attached to the project file. The raw swath sonar data, in raw.all format, for each line was then imported into the project and the vessel information assigned to the data. The motion sensor, DGPS and heading data were then cleaned using a filter that averaged adjacent data to remove artifacts. Different sound velocity profiles data for each block were attached to the corresponding raw swath sonar data files to correct the depths for changes in the speed of sound through the water column. Then a new blank field area was defined that specified the geographic area of study and the coordinate system used. The coordinates for all the study areas were WGS84. The data was cleaned by applying several filters that removed any remaining spikes in the bathymetry data using user defined threshold values. A visual inspection of the data for each line was then undertaken where artefacts and noisy data not removed by the filtering process were removed manually using Swath and subset editors modules of the Caris HIPS/SIPS software. In addition, WXTide32 software (http://www.wxtide32.com) with reference to the mean sea level and UTC time was used to obtain tidal information, which in turn was used to correct for the tidal variations in the processing. All the data for each bathymetric, motion sensor, DGPS, heading, tide and sound velocity profile data were merged to produce the final processed data file. A weighted grid of the processed data was then created for each Block. The processed data was finally exported as XYZ grid soundings and converted into ArcINFO grid.

Digital Transfer Options

onLine

DISTRIBUTION Format

ArcGIS-grid

Distributor

Role
distributor
Organisation Name
Geoscience Australia
City
Canberra
Administrative Area
ACT
Postal Code
2601
Country
Australia
Email Address

Metadata File Identifier

a529430e-2162-0f20-e044-00144fdd4fa6

Metadata Standard Name

ANZLIC Metadata Profile: An Australian/New Zealand Profile of AS/NZS ISO 19115:2005, Geographic information - Metadata

Metadata Standard Version

1.1

Metadata Date Stamp

2011-06-08

METADATA SECURITY CLASSIFICATION

unclassified

Metadata Contact

Role
pointOfContact
Organisation Name
Geoscience Australia
City
Canberra
Administrative Area
ACT
Postal Code
2601
Country
Australia
Email Address
Downloads
For information on acquiring this product,
please contact the Geoscience Australia Sales Centre via:

fax:
+61 2 6249 9960; or
phone:
1800 800 173 (within Australia);
 
+61 2 6249 9966 (outside Australia).

Please note that support hours are 9 am to 5 pm weekdays